ROUGH COUNTRY 93099 Rear Trailing Arms Instruction Manual
- October 30, 2023
- Rough Country
Table of Contents
ROUGH COUNTRY 93099 Rear Trailing Arms
Product Information
The Polaris 2017 RZR XP 1000 Rear Trailing Arms kit is available in two variants – Trailing Arm Kits (93099 & 93101) and High Clearance Trailing Arm Kits (93100 & 93102). Both kits include Upper Trailing Arm x2, Lower Trailing Arm x2, Knuckle Side Heim Joint Stand Off x8, Frame Side Heim Joint Stand Off x8, Trailing Arm Plate x1, 5/8-18 RH Threaded Rod End x4, and 5/8-18 LH Threaded Rod End x4. However, the High Clearance Trailing Arm Kits also include Inner Sleeves x2 and Bushings x4. The kit comes with hardware such as 5/8 Jam Nuts x4 and 5/8 Left Handed Jam Nuts x4. The installation requires two 15mm Socket/Wrenches.
Product Usage Instructions
- Jack up the rear of the vehicle and place it on jack stands.
- Remove the rear wheels.
- Remove the rear trailing arms using two 15mm socket/wrenches on the control arms and hitch. Refer to Photo 1 and Photo 2 for assistance.
- Install the threaded rod end into the trailing arms using the supplied jam nuts
- Install the supplied trailing arms using the stock hardware. Refer to Photo 3 and Photo 4 for assistance.
- Reinstall the wheels and lower UTV.
Note: The High Clearance Trailing Arm Kits come in two variants Straight Bar and RC. Make sure to choose the appropriate kit variant for your vehicle.
Thank you for choosing Rough Country for all your vehicle needs.
- Please read instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
- If question exist, please call us @1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Check to ensure for adequate clearance between all components.
- Periodically check all hardware for tightness.
KIT CONTENTS
Trailing Arm Kits (93099 & 93101)
- Upper Trailing Arm x2
- Lower Trailing Arm x2
- Knuckle Side Heim Joint Stand Off x8
- Frame Side Heim Joint Stand Off x8
- Trailing Arm Plate x1
- 5/8”-18 RH Threaded Rod End x4
- 5/8”-18 LH Threaded Rod End x4
High Clearance Trailing Arm Kits (93100 & 93102)
- Upper Trailing Arm x2
- Lower Trailing Arm x2
- Knuckle Side Heim Joint Stand Off x8
- Frame Side Heim Joint Stand Off x8
- Trailing Arm Plate x1
- 5/8”-18 RH Threaded Rod End x4
- 5/8”-18 LH Threaded Rod End x4
- Inner Sleeves x2
- Bushings x4
TOOLS NEEDED
Two 15mm Socket/Wrenches
HARDWARE INCLUDED
- 5/8” Jam Nuts x4
- 5/8” Left Handed Jam Nuts x4
Torque Specs
INSTALLATION INSTRUCTONS
- Jack up the rear of the vehicle and place on jack stands.
- Remove the rear wheels.
- Remove the rear trailing arms using two 15mm socket/wrenches on the control arms and hitch. See Photo 1 and Photo 2.
- Install the threaded rod end into the trailing arms using the supplied jam nuts.
- Install the supplied trailing arms using the stock hardware. See Photo 3 and Photo 4.
- Reinstall the wheels and lower UTV.
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyers responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>