Westinghouse 20-Watt White Integrated LED Flush Mount 6107400 User Manual
- June 5, 2024
- Westinghouse
Table of Contents
Operation manual
14″LED Flush mount light
With Integrated Dimmable Driver
Thank you for purchasing our product. This fixture has been manufactured from components with advanced optoelectronics to ensure high reliability and long lite Before assembling please read this Operation Manual carefully and save in a safe place for future reference. Please note that all electncal connections must be in accordance with local and National Electrical Code standards as well a5 local building codes. In case you are not familiar with proper wiring connections and building codes, consult a qualified electrician.
safety recommendations
- RAK OK ORC TRIC SHOCK – THIS PROUAIC T MUST aE INSTALLEDIN AC COREANE WTH APPLICABLE INSTALLATION CODES 8 & 2 RSON FAMILIA’ WITH MENT ONEL ABDVE COCES AND 482 4R05 INVOLVEC. CASCONNECT POWER AT CIRCLUIT BREAKER OR FUSE 22FORE NSTALLING OF SERVIC NG,
- Before Use of the product carefully ead the whale Operatice Vanua.
- THE PROCUCT IS AU SRPOSED FOR INTES OR LISE ONLY, SUITABLE FOR DAMP LOCATIONS
- Protect the product against direct contact with water.
- Assemble the product only with the use of parts provided and the housing; enproper assembly may result in device failing which could darnage the product. personal property or cause injury.
- Assembly shall follow with accessories delivered with the set only.
- The device is not a toy, KEEP OUT OF REACH OF CHILDREN.
Specifications:
Operating Vottage:1 20 VAC
Power consumption: 20W
Color Temp.: 2700K/3000K/4000K/S000K
Life span: 40,000h
Illumination authorization <5% per 10,000h
As an ENERGY STAR partner, has determined that this product meets the ENERGY STAR® guidelines for energy efficiency
Step 1
Attach installation bracket to junction box using two screws (provided)
step 2
- Connect live supply wire (A) (typically black or the smooth, unmarked side of the two-conductor wires ) to live fixture lead (B) with appropriately sized twist-on connector.
- Connect neutral supply wire (C) (typically white or the ribbed, marked side of the two-conductor wires) to neutral fixture lead (D).
- For positive grounding ina 3-wire electrical system, fasten the fixture ground (E) (typically cooper or green plastic coated) to the fixture mounting strap (1) with the ground screw (2).
Step 3
Attach base of fixture to mounting bracket using two nuts (provided)
Step 4
Align slots on the cover with the tabs in the base and twist to lock cover
onto base.
Dimming
This product is compatible with mast residential type dimmers available on the
market.
The dimming performance will depend on kind of dimmer and dimmer settings.
Visit www.satco.com for an up to date list of
compatible dimmers.
Cleaning
- Clean with a soft or damp cloth. While cleaning with the damp cloth make sure the power is NEE
- Do not clean with liquids or abrasives.
5 Year limited warranty
The purchased product is covered with a 5 year warranty with respect to any
defect in material or workmanship after purchase date.
Satco shall bear no responsibility on account of guarantee, as well as shall
bear no liability for any faults, in case of improper operation, use,
negligence, accident or exposure to any natural hazard, or excessive use over
the limits specified for the unit, or if any unauthorized alteration or repair
was made after purchase.