KBDcraft Adam 0110b Mechanical Keyboard Merging Kit Instruction Manual
- June 12, 2024
- KBDcraft
Table of Contents
KBDcraft Adam 0110b Mechanical Keyboard Merging Kit
Product Information
- Product Name: Adam 0110b Merging Kit
- Instruction Manual Version: 1.0
- Intro Project0110: Adam0110a – The modularity of the first art
Features:
- Flexible mechanical attachment of multiple independent modules
- Deep integration of two modules
- Two layout options with left- or right-positioned Numpad
- Ability to transmit data and be powered by one cable
- Modular application ready
Product Usage Instructions
Assembly
- For right-handed Numpad assembly, follow Step 4-6. For left-handed Numpad assembly, follow Step 4(L)-6(L).
- Attach 4 base plates to Adam0110b.
- Put the gaskets on. For left-handed Numpad, use the gasket position indicated for (L).
- Put both Cores in.
- Attach rubber feet and check the sit.
Firmware Installation The Numpad requires the correct firmware for different connections.
- Download the firmware from: https://kbdcraft.store/pages/opensource
- Follow the steps below to install/change the firmware:Unplug the Numpad.
- Press and hold the first button (Numlock) in the upper left corner of the Numpad.*
- While still holding the button, plug in the cable.
- A disk drive called Addams0110 will appear on your system, then release the button.
- Drag the firmware (.uf2 file) into the storage disk.
- The PCB will install the firmware and restore the factory settings.
VIAL
To activate the key value of Layer(1), hold Fn or Numlock. You can change
all the shortcut keys and light settings on VIAL. Visit
http://get.vial.today for more information.
Intro Project0110
Adam0110a
The modularity of the first art
The flexible mechanical attachment of multiple independent modules
Adam0110b
The modularity of the second art The deep integration of two modules
When we try to integrate the two sub-modules further in order to get a more capable and rigid keyboard, the quick-release mechanism will no longer be the choice. The integration of the functionality will be taken to a new level.
One of our first concepts was the “baby” fullsize Adam0110b, which combines two modules and uses 99% of the parts from the original Adam and Addams kit. It also offers two layout options, with a left- or right-positioned Numpad.
Adam0110b New PCB
The Cores should have the ability to transmit data and be powered by one cable .
The early developed PCB64 for Adam did not feature an extension socket. Since July 2023, we have upgraded all Core64 kits with the new PCB type-a, which is ready for Project 0110’s modular application.
PCB type-a has a socket for internal connection on each side with different marks. Please connect the wire to the same marks.
The later released Kit Addams including the PCB type-b is developed under the latest technical guidelines which features suckets for internal data transmission. In the figure, connections in common positions are demonstrated.
HOW TO FIX TOOLS
Firmware
The Numpad needs the right firmware to work under different connections.
Installation orders:
Firmware Installation
Download: https://kbdcraft.store/pages/opensource
Steps to install/change the firmware:
- Plug out.
- Press and hold the first button (Numlock) in the upper left corner of the Numpad.*
- While still holding the button, plug in the cable.
- A disk drive called “Addams0110” will appear on your system, then release the button.
- Drag the firmware (.uf2 file) into the storage disk.
- The PCB will install the firmware and restore the factory settings.
Vial
Activate the key value of Layer(1) by holding Fn or Numlock. You can change all the shortcut keys and light settings on VIAL http://get.vial.today