SIGNATURE HARDWARE PHVL2251 Columbus Vanity Light Instruction Manual

SIGNATURE HARDWARE PHVL2251 Columbus Vanity Light

Product Information

• Product Name: Columbus
• SKU: 939237, 939238, 939239, 939240, 428009, 476881, 476882

Before You Begin

We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, countertop, or for personal injury during installation. Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. For more information, visit www.signaturehardware.com oremail support@signaturehardware.com.

Getting Started

Ensure that you have gathered all the required materials that are needed for the installation.

Additional Questions?

If you still need help, check out our Help Center at www.signaturehardware.com
for product and warranty information. You can also contact us through live chat or by emailing support@signaturehardware.com.

For Your Safety

WARNING: Be sure the electricity to the wires you are working on is shut off, either the fuse is removed or the circuit breaker is shut off. You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully, if you are unclear as to how to proceed, consult a qualified electrician.

Care Instructions

To clean, wipe the fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads orpowders, steel wool, or abrasive paper.

Product Usage Instructions

Tools Required for Assembly:

• Safety goggles
• Wire cutters
• Phillips screwdriver

1. Thread the mounting screws (A) into the matching holes in the circular strap (B).
2. Secure the circular strap (B) to the outlet box with outlet box screws (C).
3. Connect the white wire from the fixture to the white wire from the outlet box and the black wire from the fixture to the black wire from the outlet box. Cover the two wire connections using the two provided wire connectors. Wrap the two wire connections with electrical tape for a more secure connection. Connect any additional wires according to the specific installation requirements.
4. Follow any additional instructions provided in the product manual for complete installation.

Note: It is important to shut off the electricity before working on the wires. If you are unsure about any steps, consult a qualified electrician.

SKU: 939237, 939238, 939239, 939240, 428009, 476881, 476882

BEFORE YOU BEGIN

We recommend consulting a professional if you are unfamiliar with installing electric fixtures. Signature Hardware accepts no liability for any damage to the faucet, plumbing, sink, counter top, or for personalinjury during installation.Observe all local plumbing and building codes. Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team via live chat at www.signaturehardware.com or by emailing support@siganturehardware.com.

GETTING STARTED

Ensure that you have gathered all the required materials that are needed for the installation.

ADDITIONAL QUESTIONS?
Still need help? Check out our Help Center at www.signaturehardware.com for product and warranty information, or contact us through live chat or by emailing support@signaturehardware.com.

FOR YOUR SAFETY

WARNING: Be sure the electricity to the wires you are working on is shut off, either the fuse is removed or the circuit breaker is shut off. You don’t need special tools to install this fixture. Be sure to follow the steps in the order given. Under no circumstances should a fixture be hung on house electrical wires, nor should a swag type fixture be installed on a ceiling which contains a radiant type heating system. Read instructions carefully, if you are unclear as to how to proceed, consult a qualified electrician.

CARE INSTRUCTIONS

To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.

TOOLS REQUIRED FOR ASSEMBLY & INSTALLATION

(not included)

Safety goggle

Wire strippers

Phillips screwdriver

Electrical tape

Step ladder

Wire cutters

Flathead screwdriver

Light Bulb (100 watt maximum)

SAVE THIS MANUAL: RETAIN FOR CONSUMER’S USE. READ THESE INSTRUCTIONS COMPLETELY BEFORE
INSTALLING THE PRODUCT: FOR PRODUCT OR INSTALLATION QUESTIONS PLEASE CALL CUSTOMER SERVICE AT 1-800-221- 3379.

INSTALLATION

INSTALLATION (FIG 1)

1. Thread the mounting screws (A) into the matching holes in the circular strap (B).

2. Secure circular strap (B) to the outlet box with outlet box screws (C).

3. Connect the white wire from the fixture to the white wire from the outlet box and the black wire from the fixture to the black wire from the outlet box. Cover the two wire connections using the two provided wireconnectors. Wrap the two wire connections with electrical tape for a more secure connection. Connect the copper ground wires from the fixture and from the outlet box to the ground screw on the circular strap.
   Note: If you have electrical questions consult your local electrical code for approved grounding methods.

4. After wires are connected, tuck them carefully inside outlet box. Raise the front plate (D) allowing for the mounting screws (A) to protrude through the holes on front plate (D), and secure with the ball nuts (E).

INSTALLATION (FIG 2)

1. Place the glass shade (G) , cushion ring (H) over the socket (F) in order, then secure with socket ring (I).
2. Install light bulbs (not provided). Please do not exceed the maximum wattage capacity recommended on thesocket (F). We recommend the use of a clear light bulb.

• 1.855.715.1800
• signaturehardware.com.

References

• Signature Hardware - Shop Unique, Quality Decor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>