ROBUS RDL30406060UGR-01 LED Backlit 600x600cm Low Flicke Instruction Manual
- June 5, 2024
- ROBUS
Table of Contents
ROBUS RDL30406060UGR-01 LED Backlit 600x600cm Low Flicke
PLEASE READ INSTRUCTIONS BEFORE COMMENCING INSTALLATION AND RETAIN THEM FOR FUTURE REFERENCES. Electrical products can cause death or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician
Note:
Product technical information and specification may change over time without
prior notification. For the latest technical information please visit our web
site
www.robus.com.au and
www.robusled.co.nz
20°C < Ta < +40°C, 220-240V~50/60Hz, Class II, IP20 Driver is non-dimmable. Suitable for mounting on a normally flammable surface. Driver must never be “hot-plugged” or connected to the fitting when live. Doing this may damage the fitting and will void the warranty.
Installation
- Ensure mains supply is switched off before commencing work.
- Remove 600 x 600mm tile from ceiling.
- Ensure the area above the fitting is free from obstacles pipes cable tray etc.
- Fix the metal plate onto the back of LED panel using the screws provided.
- Attach wire with clip to triangle hook and attach to solid ceiling structure so that when installed LED panel is secure.
- Connect plug to AC supply socket.
- Ensure the connections going to and from the driver are secure.
- Place connector, drivers and cable into the ceiling void.
- Offer luminaire up to the ceiling void and maneuver into final position similar to standard ceiling tile.
This product has no user-serviceable parts. If any part is damaged, disconnect from mains and discontinue use.
Safety Instructions
Warning:
Luminaire marked as NON-IC according to ASNZS60598-2.2. Not suitable for use
on residential properties. DO NOT COVER OR ABUT. Any insulation material must
be positioned at a minimum distance of 100 mm from the fitting.
Caution:
Recessed Luminaires may pose an increased risk of fire or property damage if
not installed according to the instructions provided.
The Installation must be carried out by a qualified electrician
Documents / Resources
|
ROBUS RDL30406060UGR-01 LED Backlit 600x600cm Low
Flicke
[pdf] Instruction Manual
RDL30406060UGR-01, LED Backlit 600x600cm Low Flicke
---|---