KSIX LCAUTWMINI Wireless Earphone User Manual
- June 5, 2024
- KSIX
Table of Contents
KSIX LCAUTWMINI Wireless Earphone
Technical information
- Connectivity Bluetooth 5.0
- Hands-free profile: HSP, HFP, A2DP, AVRCP
- Built-in microphone
- Driver unit: 10 mm
- Operation range: 10 m – 15 m
- Frequency range: 2.402 GHZ ~ 2.480GHZ
- Impedance: 32 Ω
- Sensitivity: -42dB
- Battery capacity: 50mAh (earphones)/ 400mAh (charging case)
- Li-Polymer Battery
- Play time: 3 – 4 hours (medium volume)
- Battery charging time: 40min / 1 – 2 hours
- Micro USB-USB cable included
- Maximum power: 5mW
- Bluetooth frequency range: 2400 mHz – 2485 mHz
- Earphones frequency range: 20 – 200 mHz
Illustration
USER GUIDE
Turn on the earphones: Keep pressed the multi-function button of the earphone you want to use. Once is it on, the earphone will go automatically into pairing mode. You will hear a voice that says “Pairing”. You can also turn on both earphones by pressing the charging case’s on/off button. Turn off the earphones: Keep pressed the multi-function button of the earphone you want to turn off. You will hear a voice that says “Power off”. Pair the earphones with your mobile device
Pair one earphone
The left earpiece is the controlling earpiece. This means you can use the left
earpiece by itself.
- Keep pressed the multi-function button until the LED indicator starts blinking red and blue. You will hear a voice that says “Pairing”, which indicates that the earphone is ready to pair with your mobile device.
- Turn on your mobile device Bluetooth and search for the signal named “LCAUTWMINI”. Select it to pair your mobile device with it. Once the earphone is connected, you will hear a voice that says “Connected”.
How to connect the earphones with each other
- Keep pressed both multi-function buttons at the same time until the LED indicators start blinking red and blue.
- Press both multi-function buttons twice, very quickly, at the same time. You will hear a voice that says “Connected”, which indicates that the earphones are connected with each other.
Note: As the left earpiece is the controlling earpiece, the right earpiece will connect to the left one, and the left one will then connect to the mobile device.
How to pair the earphones with your smartphone
- Keep pressed both multi-function buttons at the same time until the LED indicators start blinking red and blue.
- You will hear a voice that says “Pairing” on both earphones, which indicates they are ready to pair with your mobile device.
- Turn on your mobile device Bluetooth and search for the signal named “LCAUTWMINI”. Select it to pair your mobile device with it. Once the earphones are connected, you will hear a voice that says “Connected”.
Note: Every time you turn on the earphones, they will connect automatically with the last device they were paired with. If you want to pair the earphones with another device, first you will have to disconnect them from the device they are currently paired with.
Charge the earphones
The battery indicator on your mobile device screen will show how much battery
is left on the earphones. When the battery is low, you will hear a sound and
the LED indicators will start blinking red. When this happens, charge the
earphones using the charging case.
- Put the ear buds inside the charging case. Please note that if the earphones are on, they will turn off automatically.
- Connect the case to a power source using the Micro USB-USB cable. You can connect it to a computer or a laptop USB port. If you connect it to a power outlet you will need an adapter not supplied with this product.
- When charging the earphones, the LED indicators will be red.
- When the battery is fully charged, the LED indicators will be blue.
If you want to charge only one earphone, you can use the individual USB
charging cable included to connect it to a power outlet with a USB output. For
example, a computer.
You can also charge the case inner battery, which can be used to charge the
earphones on the go when there is no power source connection available.
How to charge the earphones using the charging case
Previously you have to charge the case inner battery. To charge the case
connect it to a power source using the USB-Micro USB cable. During the charge
the case LED indicator will blink red, and will turn blue when the battery is
fully charged.
- Put the earphones in the case.
- To start/stop charging the earphones press the case On/Off button.
- When charging the earphones, the earphones LED indicators will be red.
- When the earphones battery is fully charged, the earphones LED indicators will be blue.
Music Player management
You can control your mobile device music player using the buttons of the
earphones.
Play/Pause: Press once the multi-function button.
Phone calls management
- To answer/end an incoming call: Press once the multi-function button
- To reject an incoming call: Press twice the multi-function button very quickly.
- Redial: Keep pressed the multi-function button.
Note: During phone calls, the working earpiece will be the left earpiece, which is the controlling earpiece.
Automatic turn off
If the earphones are not connected to any device and are on standby mode
for 5 minutes, they will turn off automatically to save power.
Maintenance recommendations
- Regularly clean the earphones with a dry cloth.
- Avoid breaking the earphones. Do not put objects over them.
- Keep the earphones connectors and buttons free from dust, dirt, lint, etc.
- If the earphones include a cable do not pull from it to unplug them.
- Keep the earphones always in a dry place, away from humidity.
- When not using the earphones or earphones, store them in a place free from dust, dirt, lint, liquids, etc.
- Do not pull the earphones earbud tip excessively. The earbud tip may tear.
Safety information
- Please read the following instructions.
- Keep away the earphones from heat sources (fire) and from humidity (water and other liquids).
- Do not attempt to open the earphones. You might damage them.
- Do not leave the earphones in contact with flammable materials.
- Do not throw the earphones into fire.
- If the earphones are wet or damaged do not plug them into your multimedia device.
- Keep them away from children.
- Do not plug the earphones into incompatible objects or devices.
- Do not use the earphones if you perceive any visible defects.
- Do not dismount or modify the earphones. These actions will invalidate the warranty.
- Use only the supplied chargers and cables to charge the earphones. Unapproved chargers or cables can damage the battery or the earphones or earphones.
- If the earphones have Hands-Free function, do not drive a vehicle and speak by phone simultaneously.
- Do not put the earphones in your ears without earbud tips.
- Do not listen too loud the music with the earphones or earphones.
Legal Note
Hereby, Atlantis Internacional, declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/EC.
The features and functions described in this manual are based on tests made by
Atlantis Internacional S.L. It is the user’s responsibility to examine and
verify the product after its purchase. Atlantis Internacional S.L. is not
responsible and will never be liable for any personal loss or injury,
economical loss, material loss or any damage due to misuse, abuse or improper
installation of the product.
Atlantis Internacional S.L. is not responsible and will never be liable for
any function, communication and connection failure between the product and
Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be
collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.