KSIX BUDS 3 True Wireless Earphones with Charging Case User Manual

: June 5, 2024
: KSIX

Table of Contents

KSIX BUDS 3 True Wireless Earphones with Charging Case
In the box
How to connect the earphones
How to use
Maintenance recommendations
Safety information
Electronic and electrical devices disposal
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KSIX BUDS 3 True Wireless Earphones with Charging Case

Technical information

Bluetooth version: 5.0
Bluetooth proﬁle: A2DP / AVRCP / HFP
Transmission range: ≈ 10 m
Sensitivity: 104 ± 3 dB
Frequency range: 20 ~ 20 000Hz
Impedance: 32 Ω
Weight: 36 g
Single earbud weight: 3.9 g
Play time: ≈ 3 hours
Standby time: ≈ 300 hours
Charging time for the charging case: ≈ 2 hours
Earbud charging time: ≈ 2 hours
Charging case battery capacity: 320mAh
Earbud battery capacity: 40mAh
Input: 5V – 1A

In the box

1 x charging case
2 x earphones
1 x type C charging cable

How to connect the earphones

Turning on
The earphones are automatically turned on when the charging case is opened.
If they are out of the charging case, long press the touch surface of both earphones for 3 seconds to turn them on. The red and white indicator lights will ﬂash for 1 second and the word “Connected” will be heard.
Pairing (ﬁrst use)
Open the charging case. The indicator light of both earphones will alternately ﬂash red and white. After 10 seconds, the earphones will pair automatically, and the indicator light will start ﬂashing red and light slowly. This means they are ready to be paired with the device. Enable the Bluetooth function on your device, search for a device named TRUEBUDS3 and select “connect”. Once the connection has been successful, the word “Connected” will be heard.
If the device Bluetooth version is lower than 3.0, enter the default security code 0000 when the password window pops up
Turning off
Introduce the earphones in the charging case and close the cover to turn them off.
They can also be turned off by holding pressed the touch surface of both earphones for 5 seconds. The red and white indicator lights will ﬂash for 1 second and the word “Powered Off”. The earphones are turned off automatically after 3 minutes of disconnection from the device.

How to use

Use the touch surface to change from one song to another and to manage incoming calls.

Play/Pause: Short press the touch surface of any of the earphones.
Previous/Next song: Long press the touch surface of the left earphone for 2 seconds to go back to the previous song. Long press the touch surface of the right earphone for 2 seconds to change to the next song.
Answer/Hang up a call: When a call comes in, short press the touch surface of any of the earphones to answer it. Once the call is in process, short press the touch surface of any of the earphones to hang it up.
Reject a call: When a call comes in, long press the touch surface of any of the earphones for 2 seconds to reject it.
Reset: When both earphones are off, long press the touch surface of both earphones for 8 seconds to reset the pairing information.
Siri: Short press the touch surface of any of the earphones three times to open Siri.

How to charge
When the earphones have low battery, the indicator light will ﬂash red slowly, and the phrase “Battery low” will be heard.
Charging the earphones
Introduce both earphones in the charging case and close the cover. Please, check that both earphones are correctly introduced in the case. The indicator light of the charging light will turn on, and the indicator lights of both earphones will turn red.
Once the earphones are fully charged, the indicator light will fade. It takes about 2 hours to charge the earphones completely. A fully charged charging case can be used to charge the earphones more than 2 times.
Charging the charging case
Please, use a 5V-1A charger. During charging, the charging case indicator light will ﬂash red. When it is fully charged, the red light will turn into static mode. It takes about 2 hours to charge the charging case completely.

Maintenance recommendations

Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
Avoid breaking the device. Do not put objects over it or bend it too strong.
If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
Do not wet the product. Keep it always in a dry place, away from humidity.
When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
Avoid dropping or hitting the product. It might be damaged.
Do not use the product for anything other than its intended use.
Please recycle the product in accordance with local environmental laws and regulations.

Safety information

Please read the following instructions before using the device for the ﬁrst time:

When you use device keep it away from heat sources (ﬁre) and from humidity sources (water and other liquids).
If the product is wet or damaged do not us it.
Do not use the product with wet hands.
Do not leave the product in contact with ﬂammable materials.
Do not expose the product to high temperatures (for example: inside a car during hot weather)
Do not throw the product into ﬁre.
Keep the product away from children.
Disconnect or switch off the product if you are not going to use for a long period of time.
Do not use the device if you perceive any visible defects.
Do not attempt to open or puncture the product. You might damage it.
Do not use the product with incompatible devices.
Do not dismount or modify the product. These actions will invalidate the Warranty.

Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC.
The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product.
For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.

Electronic and electrical devices disposal

This symbol indicates that electrical and electronic equipment is to be collected separately.

This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
The ﬁnal price of this product includes the cost necessary for the correct environmental management of the generated waste.
If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualiﬁed professional.
Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
For more information, contact the retailer or the local authorities in charge of waste management.

CE Declaration of Conformity
We hereby declare that the product (s) listed below satisﬁes the provision for CE-marking according to the following European directive(s):
EN 55032:2015/A11:2020
EN IEC 61000-3-2:2019
EN 61000-3-3:2013/A1:2019
EN 55035:2017/A11:2020
Article: BXTW03B3 / BXTW03N3
EAN: 8427542122144 / 8427542122151
Features:
dc 3.7V By battery or DC 5V by adapter
Manufacturer:
ATLANTIS INTERNACIONAL, S.L.
Address:
Carrer del Crom, 53, 08907 L’Hospitalet de Llobregat, Barcelona (Spain)
Place and date of the declaration:
L’Hospitalet de Llobregat, February 21, 2022