SOMOGYI SMA 007 Electronic Glue Gun Instruction Manual

: June 5, 2024
: SOMOGYI

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
CLEANING, MAINTENANCE
TROUBLESHOOTING
GLUE GUN WITH SWITCH
TECHNICAL DATA
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SMA 007 Electronic Glue Gun
Instruction Manual

IMPORTANT SAFETY INSTRUCTIONS

READ THE INSTRUCTION MANUAL CAREFULLY
BEFORE USE AND RETAIN IT FOR LATER REFERENCE!
WARNINGS

Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language.
Children below the age of 3 years should be kept away from the appliance, except where they are under constant supervision. Children between the age of 3 and 8 may only switch the appliance on/off provided that it has been set up and installed in the normal operating position and they are under supervision or have been instructed how to operate the appliance safely and understand the hazards associated with use.
This appliance may only be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning the use of the appliance by a person responsible for their safety and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision.
WARNING: Parts of this appliance can become very hot and could cause burns. Extra care should be taken when children or handicapped persons are around.
Make sure, that the appliance is not damaged during delivery!
Only connect to a socket with 230V~ / 50Hz voltage!
Fully unwind the power cord!
Place the appliance in such a way, so the connector plug can be easily accessed, or unplugged!
Lead the connection cable in such a way, so it cannot accidentally unplug, and so no one can trip in it!
The connection cable cannot come into contact with the warm parts!
Do not place it near flammable materials! (min. 100 cm)
Do not use, where flammable steam or exploding hazardous dust can be released! Do not use in flammable or explosion hazardous environments!
Only operate under constant supervision!
D does not operate near children without supervision!
Only usable indoors, under dry circumstances! Protect from the humid environment (e.g. bathroom, swimming pool)!
Can cause burn injuries, so do not touch the tip or the spilled glue during use! After cutting the power, the tip can remain hot for a longer time period!
Never touch the connection cord or the appliance with wet hands!
Make sure that no object or liquid can enter the appliance through its openings
Protect from dust, humidity, sunshine, and direct heat radiation!
Use the extendable stand to safely put down the appliance!
Place a coaster to catch the spilled glue!
Never remove the glue stick with the melted end from the glue gun!
Before cleaning cut the power from the device, by unplugging the connector plug from the mains!
When finished using cut the power from the device, and do not leave the still hot glue gun without supervision!
Always let the appliance cool down naturally!
If any irregularities are noticed (e.g. strange noise is heard from the appliance, burnt smell) immediately shut down and cut the power from the appliance!
If the appliance will not be used for a longer period, shut it down, and unplug the connection cord! Store the appliance in a cool place!
Only authorized for private use, not for industrial use!

Caution: Risk of electric shock! Do not attempt to disassemble or modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.

CLEANING, MAINTENANCE

For the optimal operation of the appliance, with regularity depending on the amount of stain, but at least once a month, the cleaning of the device may be necessary.

Before cleaning turn off the appliance, then cut the power from it by removing the connector plug from the mains!
Let the appliance cool down (min. 20 perc).
With a slightly wet cloth clean the outside of the appliance!
Do not use aggressive cleaners! Do not let the water come into contact with the electric parts located inside of the appliance!

TROUBLESHOOTING

Problem	Possible solution
The glue gun heats up too much, the glue is burned	Cut the power from the

device, and contact a specialist.
The glue does not flow from the glue gun| The glue gun did not yet heat it up to the necessary
temperature, wait.

DISPOSAL
Waste equipment must be collected and disposed of separately of from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function.
Dispose of products at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

GLUE GUN WITH SWITCH

AREA OF USE
With the help of the glue gun paper, cardboard, wood, glass, or textiles, leather, rubber, ceramics, stone, metal, PUR foam, plastic, and many other materials can be glued within seconds in any preferred combinations. In the case of certain plastics and metals, preliminary experiments may be necessary.

Not suitable for gluing soft PVC, polyethylene, polypropylene, polystyrene, and Teflon.
Excellent for modeling, decorating, and flower arrangement works, and for the gluing g of decorations. Also ideal for filling gaps and joints, because its volume does not diminish during hardening. Sticks to almost any material, if the surface is clean, and is dust and grease-free. The best adhesion can be done on roughened surfaces. If necessary use a fine abrasive canvas.

INSTALLATION, OPERATION

Use the extendable stand to safely put down the appliance! By folding it back the workplace can be reached, while extending it the glue gun can be put down in a forward tilted position during pauses.
After connecting it to the mains, turn it on with the toggle switch, this is indicated by a green LED lighting up.
The heater reaches operating temperature after 5 minutes (ca. 2000C). Now place in the glue stick, and by pressing the trigger – without forcing it – fill it into the tube (into the heater).
Due to the multiple usabilities, it is advised to make a trial!
Place a coaster to catch the spilled glue!
The glue sticks are not fired hazardous and pose no threat to health. Heat (e.g. sunshine, heaters) must be avoided because they can deform!
After heating up (ca. 2 min), by carefully operating the trigger, administer the necessary quantity. It is advised to administer only as much glue as needed. The surplus spills out of the glue gun and is lost.
During use do not force the trigger, because the inner mechanism can break! The quantity of glue that can be administered is limited by the speed of the heating and is in not correlated to the force that the trigger is pushed with.
Immediately push together the surfaces wished to be glued, and hold them that way for at least 15 seconds. The glue hardens after approx. 1 minute, and can be partially moved, but for the stable bonding, more time is needed. The glue does not need to be smeared. Good heat conducting surfaces (e.g. stone, metal) are needed to be heated beforehand.
After turning it off, with a thick, dry clot clean the still warm tip, and remove the remains of the glue! Avoid the hot parts!
After usage cut the power from the appliance, by unplugging the connector plug, do not leave the still warm glue gun without supervision!
Always let the appliance cool down naturally!
The bond will be permanent, and the glue slightly flexible, not brittle, or prone to cracking.
Transparent, and void of silicon, is suitable for further working, or painting. The surplus glue can be easily removed by using a heated-up blade.

The diameter of the usable glue stick is 11 mm, the separately buyable packets type is: SMA 067T. (includes: 10 x 11 mm / 100 mm)

TECHNICAL DATA

Glue gun
power supply …………………………………………………….. 230 V ~ / 50 Hz
output……………………………………………………………….. 100 W
electric shock protection class ……………………………… II.
heat up time ………………………………………………………. ca. 5 perc
the operating temperature of heater …………………………… ca. 200ºC
melt time …………………………………………………………… ca. 2 perc
size of appliance ………………………………………………… 19x16x3 cm
length of power cord …………………………………………… 1,4 m
Glue stick
glue stick softening point …………………………………….. 84 ± 5ºC
glue stick melting point ……………………………………….. 170 – 190 ºC
open (hardening) time ………………………………………… ca. 30-60 sec / 20ºC
diameter of the glue stick …………………………………….. 11 mm
glue stick max. store temperature ………………………… 60ºC

Producer
SOMOGYI ELEKTRONIC®
www.somogyi.hu