KSIX BXSEASHR02 Healthyband Smartband User Manual
- June 5, 2024
- KSIX
Table of Contents
KSIX BXSEASHR02 Healthyband Smartband
Technical information
- Display: 0,96”, 80×160 resolution
- Bluetooth: 4.0
- Battery: Polymer-lithium
- Battery capacity: 90mAh
- Battery life: 3 days (normal use) / 7 days (stand-by)
- Charging time: 1.5-2 h
- Charging type: clip charge
- Waterproof rating: IP67
- Sensor: G-Sensor 3 axis
- Strap: Silicone
- Strap size: 240 x 16 x 11,9 mm
- Working temperature: -10°C – 45°C
- Weight: 20 g
- System requirements: Android 4.4 and following versions, iOS 8.0 and following versions APP: Wearfit
Compatibility
- iOS 8.0 and above
- Android 4.4 and above
HOW TO CHARGE YOUR FITNESS BAND
- Connect the fitness band to the included USB charging clip. Once connected, connect the USB to a USB power source, such an 1A adapter, a laptop or a power bank for a minimum of 15 minutes.
- Then, the device will turn on automatically.
- It takes 2 hours to charge the device completely. Once it has been charged fully, the device can be on up to 7 days.
HOW TO TURN YOUR FITNESS BAND ON AND OFF
- Long press the central button when your fitness band is off to turn it on. Once the device has vibrated, short press the central button to start moving from one function to another.
- Long press the central button when your fitness band is on to turn it off. An “ON/OFF” icon will appear on screen. Short press and then long press until the device vibrates to turn it off. Long
- press to escape the “ON/OFF” screen and go back to functions. Please note it is not possible to turn the device off from the stopwatch/find phone/SMS/background function.
HOW TO PAIR YOUR FITNESS BAND WITH YOUR SMARTPHONE
- Search “Wearfit App” on App Store or Google Play, or scan the following QR code:
- Open your device’s Bluetooth settings before pairing
- Tap “Scan device” to select the fitness band you want to pair.
Note: Some Android phones cannot find the fitness band using just Bluetooth at first. Please, enable the GPS function in your phone if this happens. If your phone still cannot find the device, enable and disable flight mode.
What to do if your smartphone cannot find the fitness band and, therefore, cannot connect to it
- Please, ensure your smartphone’s Bluetooth is on and that its operating system is Android 4.4 or above versions / iOS 8.4 or above versions. Also, make sure the fitness band is fully charged.
- If the connection is not possible yet, enter the smartphone settings. Then, enter the app management settings, allow all permits and turn the GPS location. Finally, restart the phone and try to connect again.
- What to do if the app does not recognize the connection or shows the fitness band has a 0% battery level
- The app has not been connected to the fitness band successfully. Please, try to connect again.
- What to do if the app cannot connect to the fitness band
- Please, scroll down and refresh the main page. Data should be synced and displayed on the app. Data will be synced automatically hourly if this option is enabled.
- In the above does not work, enter the app settings and restore the factory settings. Then, restart the fitness band and connect it to the app again.
HOW TO USE THE FITNESS BAND
Short press the central button to move from one function to another. To enter or leave the stopwatch/find phone/SMS/background function, long press the central button for 5 seconds.
FUNCTIONS
- Time/date display: It shows the time, day of the week, and date.
What to do if the time shown is not accurate
- It is possible that there is a mismatch between the fitness band time and the real-time when the device has run out of power and been recharged. Please, connect it with your smartphone and the fitness band will automatically sync time.
- If the above does not work, enter your smartphone settings, and then the app management settings. Allow all permits and refresh the app’s main page.
Pedometer
It shows steps and distance walked, and calories burnt. It is necessary to enable the GPS before using this function.
Heart rate control
- The HR detection will run automatically when this function is displayed. The all-day HR control can be disabled or enabled from Settings > HR auto-detection.
- It takes a few seconds until the results are shown on screen.
Blood pressure control
The detection will run automatically when this function is selected. It takes a few seconds until the results are shown on screen.
Oxygen saturation control
The detection will run automatically when this function is selected. It takes a few seconds until the results are shown on screen.
Find phone
- Long press the central button to enter this function. Press it once to start the search and long press for 5 seconds to leave the function.
- Please note that it is necessary that both devices have been paired previously.
Stopwatch
Long press the central button to enter this function. Short press to start counting and short press again to stop. Long press for 5 seconds to leave the function.
SMS
- Long press the central button to enter this function. Short press to check the contents, and long press again for 5 seconds to leave the function.
- Please note that all SMS/App permissions must have been enabled previously so that this function works properly.
Background
- Long press the central button to see different background options. Short press to move from one background to another, and long press to select one.
- If the fitness band vibrates, it means the background has been successfully applied.
Incoming calls control
- In case you have an incoming call, short press the central button to mute it or long press to reject it.
- Please note that all SMS/App permissions must have been enabled previously so that this function works properly.
Daily exercise
- Daily step goals can be set in the app. The fitness band will inform you when the goal is achieved.
EXEMPTION CLAUSE
The medical data shown on this fitness band must not be considered to be a medical or diagnosis basis. Please, only rely on qualified physicians to analyze, diagnose and treat any disease or medical imbalance.
Maintenance recommendations
- Regularly clean the product with a dry cloth. The product must be disconnected or switched off when you clean it.
- Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper connections.
- Avoid breaking the device. Do not put objects over it or bend it too strong.
- If the product includes a cable do not bend it too strong and do not pull from it to unplug the product.
- Do not wet the product. Keep it always in a dry place, away from humidity.
- When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
- If water or other liquids enter the product interior, unplug it immediately from any attached power source or device it is connected to.
- Avoid dropping or hitting the product. It might be damaged.
- Do not use the product for anything other than its intended use.
- Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
- When you use a device keep it away from heat sources (fire) and from humidity sources (water and other liquids).
- If the product is wet or damaged do not us it.
- Do not use the product with wet hands.
- Do not leave the product in contact with flammable materials.
- Do not expose the product to high temperatures (for example: inside a car during hot weather)
- Do not throw the product into fire.
- Keep the product away from children.
- Disconnect or switch off the product if you are not going to use for a long period of time.
- Do not use the device if you perceive any visible defects.
- Do not attempt to open or puncture the product. You might damage it.
- Do not use the product with incompatible devices.
- Do not dismount or modify the product. These actions will invalidate the Warranty.
Legal Note
Hereby, Atlantis Internacional S.L. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. The features and functions described in this manual are based on tests made by Atlantis Internacional S.L. It is the user’s responsibility to examine and verify the product after its purchase. Atlantis Internacional S.L. is not responsible and will never be liable for any personal loss or injury, economical loss, material loss or any damage due to misuse, abuse or improper installation of the product. For electronical devices with Bluetooth: Atlantis Internacional S.L. is not responsible and will never be liable for any function, communication and connection failure between the product and Bluetooth enabled devices.
Electronic and electrical devices disposal
This symbol indicates that electrical and electronic equipment is to be collected separately.
- This product is designated for separate collection at an appropriate collection point. Do not dispose of as household waste.
- The final price of this product includes the cost necessary for the correct environmental management of the generated waste.
- If the equipment uses batteries, they must be removed from the equipment and disposed in an appropriate collection center. If the batteries cannot be removed, do not attempt to do it yourself since it must be done by a qualified professional.
- Separate collection and recycling helps conserve natural resources and prevent negative consequences for human health and the environment that might result from incorrect disposal.
- For more information, contact the retailer or the local authorities in charge of waste management.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>