STREETZ TWS-115 True Wireless Earbuds User Manual
- June 5, 2024
- STREETZ
Table of Contents
STREETZ TWS-115 True Wireless Earbuds
PRODUCT OVERVIEW
- Charging contact (USB-C)
- Touch button On/off/previous/next/answer/hang up
- Battery level (LED indicator)
Power on and off
- Open the charging case, they will automatically power on.
- Place the earbuds in the charging case and close the case to automatically power them off.
- The LEDs will flash red to confirm.
- Press and hold the button for 3 seconds to manually power them on, the LEDs will flash blue for 1 second to confirm.
- Press and hold the button for 5 seconds to power them off, the LEDs will flash red for 1 second to confirm.
Charging
- Insert the earbuds into the charge case to charge them.
- The charging contacts should be well connected.
- The earbuds LEDs are red while charging. When they are fully charged, they change to blue for 1 second and then turn off.
- Charge the charging case via a USB-C cable. The LEDs are green while charging. The LEDs turn off when fully charged.
- If the earbuds are not charging, check that they are well connected and clean them.
Connect
First time use:
- Take out the earbuds from the case. Wait 5 seconds, they will power on and connect to each other.
- One of the earbuds will flash red and blue. The other earbud will flash blue.
- Connect with bluetooth to the earbuds from your phone/device. Refer to your phone/device manual if needed.
Usage
Gently put the earbuds into your ears.
-
Answer and hang up a phone call
Press the button to answer or hang up a phone call. Press and hold for 1 second to reject a call. -
Play/Pause
Short press the button to play/pause. -
Next song
Long press (2 seconds) on the right earbud for next song. -
Previous song
Long press (2 seconds) on the left earbud for previous song. -
Volume
Press the button 2 times quickly on the right earbud to increase volume. Press the button 2 times quickly on the left earbud to decrease volume. Or adjust the volume from your connected device (eg. phone). -
Gaming mode
Reduces latency to 40 ms.
Press the button 3 times quickly on either earbud to activate gaming mode.
Cleaning
Clean the charging case and the earbuds once per week with an alcohol pad.
Safety instructions
- Never disassemble or modify the product to avoid damage to the product and to avoid danger.
- Do not store in extreme temperatures (below 0°C or over 45°C).
- Do not use harsh chemicals or strong detergents when you clean this product.
- Keep dry.
- To avoid hearing damage, make sure that the volume is set to low before connecting. Gradually turn up the volume until you reach a comfortable listening level.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>