STREETZ CM770 Portable Bluetooth Speaker User Manual

STREETZ CM770 Portable Bluetooth Speaker

PART DESCRIPTION

1. Power switch on/off

2. Charge and audio port (USB Micro-B)
   Use the 2-in-1 cable to charge and/or use 3.5 mm sound devices

3. MicroSD slot

4. USB-Aport

5. “M” = mode button

6. “.’ button
   Short press for volume decrease
   Long press for previous song

7. “+” button
   Short press for volume increase
   Long press for next song

8. “>” button (Play/pause/stop/Answer/hang up/Search for radio channels)

CHARGING THE BATTERY

Connect the included charging cable to the charge port and a USB port on your computer or USB charger. The red LED is Iii during charging.
If Bluetooth mode is on, the LED will be blinking blue, while red is lit at the same time.
When the battery is fully charged, the red LED is turned off.
It can take up to 3 hours for an empty battery to be fully charged.

PAIR TO A BLUETOOTH DEVICE

1. Use the ON/OFF switch to power the speaker on or off.
   The blue LED starts blinking.
   The speaker is now detectable by other Bluetooth devices.

2. On your device, search for Bluetooth devices. Refer to your device user manual if needed.

3. On your device, select the speaker.
   The blue LED starts to glow, indicating successful pairing.

MICROS□ CARD/USB-A PORT
Connect a MicroSD card or a USB memory stick and power the speaker on.
Music will be played automatically.
Press the “>” = play button to stop the music.
To start the music again, you have to remove and re-insert the card/memory stick again.

HANDSFREE

Handsfree is only in available Bluetooth mode.

1. Power the speaker on.
2. Pair the speaker with Bluetooth to your device. Press the “>” = play button to answer or hang up.

FM RADIO

1. Power the speaker on, and press the “M”, until radio mode is reached.
2. Press the “>” = play button to search for FM stations, it will find and store all stations it finds. Please be patient while it searches. (You can still press + or – if you don’t want to wait anymore)
3. When it has stored radio stations, you can change channel with long press on the volume buttons.
4. Short press on volume buttons to increase or decrease the volume.

We recommend: Improve the radio signal by connecting the charge cable to the charge port. The charge cable works like an antenna.

CONNECT TO AUX (3.5 MM)

1. Connect to a 3.5 mm sound device by using the 2- in-1 cable (included)
2. Connect the Micro USB connector to the speaker.
3. Connect the 3.5 mm connector to a 3.5 mm sound device.
4. Power the speaker on. If music is not played automatically, press the “M -mode button until you reach AUX mode (3.5mm).

True wireless function
This speaker has TWS (True Wireless Sound) functionality. This means that two speakers can pair with each other and function as a 2.0 wireless speaker system, stereo sound.
To use true wireless function, you must have 2 pieces of
the same speaker.
These can be paired together: CM770

To connect:

1. Tum on both speakers. Make sure that both speakers are not connected to any device through Bluetooth.
2. After turning them on, wait for about 8 seconds, they will pair automatically. A tone will be played, confirming successful connection.
3. Use the Bluetooth menu on your device and pair the speakers with your phone by selecting the speaker (it will only display one speaker, both speakers now function as one).

Note:

You can control Play/Pause, Volume and NextfPrevious track on both of the speakers.
The speakers will automatically pair with each other if they were paired when they were shut off.
If your device is connected to both speakers without the speakers being paired with each other; and you want to pair the speakers with each other you have to disconnect your device from one
of the speakers.

To disconnect:
Press and hold the “M”-mode button on one of the speakers for about 2 seconds. A tone will be played.

To reconnect:
Press and hold the “M•-mode button on one of the speakers for about 5 seconds. A tone will be played.

SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.aurdel.com/compliance/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>