STREETZ CMB-100 TWS Boombox User Manual
- June 12, 2024
- STREETZ
Table of Contents
STREETZ CMB-100 TWS Boombox
Product Information:
The CMB-100 is a portable speaker that offers various features for an enhanced audio experience. It has multiple input options,including USB and Bluetooth, allowing you to connect your devices easily. The speaker also features LED lights with different modes for added visual appeal. With its TWS (True Wireless Stereo) function, you can connect two speakers for a stereo sound experience. The speaker is equipped with a built-in microphone for hands-free calling and voice assistant support.
Product Usage Instructions
-
To turn the speaker on or off, press and hold the power button.
-
To connect via Bluetooth, turn on the power and navigate to the Bluetooth settings on your phone or Bluetooth device. Find the CMB-100 speaker and connect to it. Press and hold the LED button to disconnect Bluetooth.
-
To play music from a USB flash drive, turn on the power and insert the USB drive into the USB-A port. The speaker will automatically start playing the music. Note: This function will stop other functions, such as Bluetooth.
-
To connect using an audio cable (aux), turn on the power and connect the cable to the audio port. The speaker is ready to use.
Note: This function will stop other functions, such as Bluetooth.
Some speaker functions can be controlled by the connected device. -
To control the LED lights, short press the LED button to switch between different light modes or turn them off.
-
To activate the voice assistant, turn on the power and connect your phone via Bluetooth. Long press the voice assistant button to activate the voice assistant feature.
-
For playback control, use the play/pause button for short presses to play or pause music from Bluetooth or USB. Long press the play/pause button to reject a call or switch to talking on the phone during a call. Use the forward and backward buttons for long presses to skip to the next or previous track. For short presses, the forward button increases the volume, and the backward button decreases the volume.
-
For TWS function, short press the mode button to switch modes,and long press to enable or disable the TWS function.
OVERVIEW
- USB-C charge port
- LED status (Charging)
- USB-A port
- Audio port (aux)
- Backward/volume down
- Forward/volume up
- Mode button and “TWS”
- Play/pause/voice assistant button
- LED button
- Power (on/off) button
- Microphone
INSTRUCTION
On/off
Press and hold the power button to turn the speaker on or off.
Bluetooth
Turn the power on. The speaker is ready for a Bluetooth connection.
From your phone/Bluetooth device’s Bluetooth settings find this speaker and
connect to it.
Press and hold the LED button (9) to disconnect Bluetooth.
USB
Turn the power on. Insert a USB flash drive into the USB-A port. The speaker
will play music automatically.
Note: This function will stop other functions, such as Bluetooth.
Audio cable(aux)
Turn the power on. Connect an audio cable to the audio port (aux). The speaker
is ready.
Note: This function will stop other functions, such as Bluetooth.
Some of the speaker’s functions can be controlled by the connected device.
LEDs
Short press on the LED button to switch between the 3 different light modes
and to turn it off.
Voice assistant
Turn the power on. Connect from your phone via Bluetooth.
Long press on the voice assistant button to activate the voice assistant.
Functions
- Play/pause button = short press (Bluetooth/USB). Also, to answer a call and end a call.
- Play/pause button = long press rejects a call. And switches to talking on the phone during call.
- Forward button = long press (Bluetooth/USB), next.
- Backward button = long press (Bluetooth/USB), previous.
Forward button = short press (Bluetooth/USB), volume up.
Backward button = short press (Bluetooth/USB), volume down.
LED button = long press (Bluetooth), disconnect Bluetooth. Short press to
change LED mode and to turn the LEDs off.
Mode button = short press to switch mode.
Mode button = long press to enable or disable TWS function.
Voice assistant button = Long press.
Hands-free call
While using Bluetooth and someone is calling. Short on press play/pause button
to accept the call or long press to reject the call.
During a call press and hold the play/pause button to switch to talking on the
phone. Short press on the play/pause button ends the call.
“TWS”
Requirement: 2 identical speakers.
This speaker supports TWS functionality. It means you can play the same music
in stereo from 2 identical speakers.
First make sure you are not connected to the speaker with Bluetooth.
Disconnect and forget the speaker from your phone/Bluetooth device.
To enable the function: Turn on both speakers. Press and hold the mode button
on one of the speakers. The speaker will make tone to confirm it is trying to
pair. And a 2nd tone when the pairing is successful.
Connect to the speakers from your Bluetooth settings on your phone/Bluetooth
device.
To disconnect: Press and hold the mode button on one of the speakers.
General information
Play time may vary depending on volume level and music.
Charge
Connect a USB-C cable to the charge port and the other end of the cable to a
USB power adapter (5V/1A to 3A) or another USB power source such as a
computer, to start charging.
USB power adapter is not included.
-
Fully charged : The charge LED turns off. When battery level is low, the speaker will make a tone.
This device does not support charging other devices. Do not connect other devices such as phones to the USB-C charge port. -
Battery care: To protect the battery, do not use the speaker while it is charging.
Warning instructions
Do not use or store this speaker in extreme temperatures.
Keep it away from anything that generates heat such as radiators and stoves.
Store in a cool and dry area.
To extend the speaker’s lifespan avoid playing music on maximum volume.
Cleaning and maintenance
Clean the product by using a dry cloth. For tougher stains, use a damp cloth with a mild detergent.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows: Hereby, DistIT Services AB declares that the radio
equipment type wireless device is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
www.aurdel.com/compliance/
Disposal of electric and electronic devices EC Directive 2012/19/EU This product is not to be treated as regular household waste but must be returned to a collection point for recycling electric and electronic devices. Further information is available from your municipality, your municipality’s waste disposal services, or the retailer where you purchased your product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>