EKF S 500 Indego 18v Cordless Smart Robotic Lawnmowerr Instructions
- October 30, 2023
- EKF
Table of Contents
EKF S 500 Indigo 18v Cordless Smart Robotic Lawnmower
Product Information
The product is a voltage regulator (dimmer) used for controlling the amount of voltage supplied to a light source. It is designed to fit into a hollow in the wall and is comprised of a front cover, frame, rheostat knob, mechanism, terminal clamps, and locking and fastening screws for the unit housing. The product works by adjusting the amount of electrical current delivered to the light source, thereby controlling the brightness of the light.
Product Usage Instructions
- Pull the rheostat knob to remove it from the mechanism.
- Unscrew and remove the front cover and the frame from the mechanism.
- Connect the wire ends to the terminal clamps by pushing them into the grooves and tightening the screws.
- Install the mechanism into the hollow in the wall and firmly tighten the locking and fastening screws for the unit housing.
- Install the front panel cover, frame, and rheostat knob back onto the mechanism.
Note It is recommended that a licensed electrician perform the installation to ensure proper wiring and safety precautions are taken.
Installation directions for the voltage regulator (dimmer)
Pull the rheostat knob
Unscrew and remove the front cover and the frame.
Connect the wire by pushing the ends into the grooves of terminals clamps and tighten the screws.
Install the mechanism into the hollow in the wall, tighten firmly the locking and fastening screws of the unit housing.
Install the front panel cover, the
frame, and the rheostat knob.
