STREETZ HL-BT405 Bluetooth Headphones Instruction Manual
- June 9, 2024
- STREETZ
Table of Contents
STREETZ HL-BT405 Bluetooth Headphones
Thank you for choosing STREETZ!
- Voice assistant button
- Aux port (3.5 mm)
- USB Micro-B charging port
- Microphone
- Power On/Off/Play/Pause/Answer Call/End Call/Connect Bluetooth
- LED status indicator
- Previous song/decrease volume
- Next song/increase volume
Charge
This product has a built-in rechargeable battery. Before using it the first time, we recommend that you charge it fully (About 2 hours). Use the included Micro USB cable to charge. Connect the USB Micro-B connector to the headset and the other end to a USB power source with 5V, such as a USB power adapter, or a computer.
- LED status
- LED is lit red = charging
- LED is lit blue = fully charged
- LED flashes alternatively blue and red = ready for connection
- LED flashes blue every 5 seconds = connected
Power button functions
- Press and hold the power button for about 5 seconds to turn the headset on or off.
- Press the power button to Play/Pause/Answer call/End call.
- Press and hold the power button for 2 seconds to reject a call.
- Press the power button 2 times to redial last number.
Connect
Turn the headset off.
Press and hold the power button for 5 seconds to enter pairing mode. (From
power off)
From your Bluetooth device, connect with the headset. If a password is
requested, use the default: 0000. The headphone will automatically connect to
the last connected device.
Use your device to disconnect the headset.
Connect via Aux port
Connect the 3.5 mm cable to the Aux port of the headset. Connect the other end
to an audio device.
The headset is turned on automatically when it is in Aux mode and the control
buttons are disabled.You can only change volume from you audio device.
Volume up/down
Short press on “+“ to increase volume or “-” to decrease volume.
Next/Previous song
Press and hold “+” for next or “-“ for previous song.
Voice assistant button
Press the voice assistant button to activate your voice assistant, such as
Siri or Google Assistant.
An indication tone should be heard before you can speak to the headset.
Requirements for voice assistant button functionality is that you have a voice assistant installed on your device, that it has been set as the default voice assistant and your device must be connected to the headset via Bluetooth.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows: Hereby, DistIT Services AB declares that the radio
equipment type wireless device is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address:
All DoC’s can be found the product’s specific website, to access it go to:
https://www.deltaco.se/produkter/xx (just change xx to the article number,
for example
https://www.deltaco.se/produkter/TWS-111)
Then click on the tab “Info/Certifikat”.
References
- Aurdel - Distributør av den nyeste og beste teknologien
- Aurdel - Distributør av den nyeste og beste teknologien
- deltaco.se/
- Alla produkter
- STREETZ Trådlösa in-ear hörlurar med laddningetui, BT 5, TWS, vit
- deltaco.se/produkter/xx
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>