isimple MGMMBN98 Magnetic Phone Mount Instruction Manual
- June 5, 2024
- iSimple
Table of Contents
simple MGMMBN98 Magnetic Phone Mount
INSTRUCTION
Magnetic Phone Mount – MGMMBN98
NOTE : Make sure you are parked in a safe spot before installation. NEVER WHILE DRIVING.
Mount Setup
How to Mount to Your Dash
- Choose a flat surface area (not curved) and wipe clean.The car mount WILL NOT stick well onto leather or uneven surfaces.
- Peel off the adhesive backing on the mount after the cleaned area is completely dry.
- Place the phone mount on the area (hold it at least 2 minutes), it is recommended to wait at least 36 hours before using.
- After drying for 36 hours, you can adjust it to any desired angle.
In order to stick on firmly, please wait 36 hours then use.
- Strong Magnet
- 360 Degree Rotation
How to Install Metal Plate
-
For Phones that do not support wireless charging
Peel off adhesive backing and stick the metal plate onto the back of your phone. -
For Phones that support wireless charging
Stick the metal plate onto the bottom on the back of your phone to avoid interfering with the charging pad.
Note:
- If your phone has a protective case, stick the metal plate onto the back of protective case or inside it.
- Be sure to clean and dry the installation area before use.
Technical Support
US
AAMP Global
Tel.: 866-788-4237
support@iSimple.com
www.iSimple.com
EU
AAMP Global UK Tel.: +01-800-477-2267 support@iSimple.com www.iSimple.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>