STREETZ CM765 Waterproof Bluetooth Speaker User Manual

STREETZ CM765 Waterproof Bluetooth Speaker User Manual

1. Microphone
2. Increase volume/next song
3. Decrease volume/previous song
4. Bluetooth LED indicator
5. Power on/off, switch playing mode
6. Play/pause/answer call/hang up/TWS
7. 3.5 mm, input port
8. Charge port, USB-C
9. Charging LED indicator
10. MicroSD card slot

Safety instructions

1. Only use charging devices marked with 5 V to avoid damage to the speaker.
2. Do not open up the speaker. It may damage the product.
3. Do not try to repair the product yourself.
4. Never place the speaker close to high temperature sources.

The speaker’s battery A built-in rechargeable battery powers the speaker.

Charging the battery Connect the supplied charging cable to the charge input and to a USB port on your computer or a USB charger. The charging LED is lit during charging. The LED turns off when fully charged.

Bluetooth The Bluetooth range is up to 10 meters. Obstacles between this product and the Bluetooth device can reduce the range. Keep the device away from any other electronic devices that may cause interference.

Power button Press and hold the power button for about 3 seconds to power the speaker on or off. The Bluetooth LED flashes to confirm. You can now connect to a Bluetooth device or use the 3.5mm input. The speaker will turn itself off automatically after 10 minutes of inactivity. Short press on power button switches between Bluetooth, 3.5 mm input and MicroSD card.

Connect the speaker

Power the speaker on. On your device search for Bluetooth devices. Select the speaker from the list. The speaker will give an indication sound when the connection is successful. The Bluetooth LED changes to static light. Only one Bluetooth device can be connected at the same time.

If you want to connect another device to the speaker, then first disconnect the current one.
Disconnect the speaker On your device, disconnect the Bluetooth connection with the speaker. Or press and hold the mode button for about 3 seconds.

Reconnect the speaker Some Bluetooth devices support automatic reconnection, with those devices the speaker will automatically reconnect. The speaker will not automatically reconnect on devices that does not support automatic reconnection. Double press the power button to connect to the last disconnected device.

The play button’s functionality Play / pause / answer incoming call / end call = short press on the play button. Re-dial last call = Double press on the play button.

Change volume and song When listening to music Increase volume: Short press on the “+” button. Decrease volume: Short press on the “- ” button. Previous song: Long press on the “-” button. Next song: Long press on the “+” button.
During a call Increase volume: Short press on the “+” button. Decrease volume: Short press on the “- ” button.

Audio cable connection Power the speaker on. Connect a 3.5 mm audio cable to the speaker and your device. The speaker is now connected to your device.

MicroSD Insert a MicroSD card and power on the speaker to play music.

Hands-free functionality A ringtone will be played when there is an incoming call on the connected device. A short press on the play button to answer. When hands-free is activated, you talk via the speaker’s microphone.

True wireless function This speaker supports TWS (True Wireless Sound) functionality. This means that two speakers can pair with each other and function as a 2.0 wireless speaker system.

In order to use the true wireless function, you must have 2 pieces of the same speaker. These can be paired together: CM765/CM766 To connect:

1. Turn on both speakers. Make sure that both speakers are not connected to any device through Bluetooth.
2. Press and hold the Play/Pause button on one of the speakers for about 2 seconds or until you hear a tone.
3. Release the Play/Pause button. It can take a few more seconds before the speakers connect to each other. Flashing LED = Left and primary speaker. Solid LED = Right speaker.
4. Use the Bluetooth menu on your device and pair the speakers with your phone by selecting the speaker (it will only display one speaker, both speakers now function as one).

Note: You can control Play/Pause, Volume and Next/Previous track on both of the speakers. The speakers will automatically pair with each other if they were paired when they were shut off. If the automatic pairing doesn’t work when they are turned on. Please connect manually, see step 1-4. If your device is connected to both speakers without the speakers being paired with each other; To pair the speakers with each other, you must disconnect your device from one of the speakers.

To disconnect: 1. Press and hold the Play/Pause button on one of the speakers for about 2 seconds or until you hear a tone.

Charging cable

The included USB-C charging cable should only be used with CM765 and CM766.

SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services
AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
All DoC’s can be found the product’s specific website, to access it go to: https://www.deltaco.se/produkter/xx (just change xx to the article number, for example https://www.deltaco.se/produkter/TWS-111)
Then click on the tab “Info/Certifikat”.

References

• Aurdel - Distributør av den nyeste og beste teknologien
• Aurdel - Distributør av den nyeste og beste teknologien
• deltaco.se/
• Alla produkter
• deltaco.se/produkter/TWS-
• STREETZ Trådlösa in-ear hörlurar med laddningetui, BT 5, TWS, vit
• deltaco.se/produkter/xx

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>