STREETZ HL-BT404 Bluetooth Noise Cancelling Headphones User Manual

: October 30, 2023
: STREETZ

Table of Contents

STREETZ HL-BT404 Bluetooth Noise Cancelling Headphones
Product Information: HL-BT404
LED Status
Functionality
Product Usage Instructions
PARTS
LED STATUS
FUNCTIONALITY
PAIRING
SIMPLIFIED EU DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

STREETZ HL-BT404 Bluetooth Noise Cancelling Headphones

Product Information: HL-BT404

The HL-BT404 is a wireless Bluetooth headset with noise-cancellation functionality. It has a USB Micro-B charge port, a 3.5 mm audio port, and a multifunction button that can be used to play/pause music, answer or end calls, and pair with Bluetooth devices. The headset also has volume up/down buttons and a noise-cancellation button. The LED light on the headset indicates the status of the battery, charging, noise cancellation, and Bluetooth pairing.

LED Status

Red LED flashes: Low battery
Red LED is lit: Charging
The LED turns off when fully charged
LED flashes blue and red: When active / ready for Bluetooth connection
Green LED is lit: Noise cancellation is active

Functionality

The HL-BT404 headset can be paired with Bluetooth-enabled devices by pressing the multifunction button. It also has noise-cancellation functionality that can be activated by pressing the noise-cancellation button.

Product Usage Instructions

Charge the headset using the USB Micro-B charge port.
Press and hold the multifunction button until the LED light flashes blue and red to enter pairing mode.
On your Bluetooth-enabled device, search for available Bluetooth devices and select “HL-BT404” from the list.
The LED light will turn solid blue when the headset is connected to the device.
To listen to music or answer calls, press the multifunction button once.
To end a call or pause music, press the multifunction button again.
To adjust the volume, use the volume up/down buttons on the headset.
To skip to the next track, press and hold the volume up button. To go back to the previous track, press and hold the volume down button.
To activate noise cancellation, press the noise-cancellation button.

Note: The HL-BT404 headset has a maximum RF output of (EIRP).

PARTS

Noise cancellation button
USB Micro-B charge port
3.5 mm audio port
LED
Volume down/previous
Multifunction button Play/pause/answer call/end call/Bluetooth pairing
Volume up/next

LED STATUS

Red LED flashes: Low battery.
Red LED is lit: Charging.
The LED turns off when fully charged.
LED flashes blue and red: When active / ready for Bluetooth connection.
Green LED is lit: Noise cancellation is active.

FUNCTIONALITY

Press the noise cancellation button to activate (LED turns green) or deactivate (LED turns off) noise cancellation.
Power on/off: Press and hold the multifunction button for 3 seconds.
Volume up: Short press on the ‘+’ button.
Volume down: Short press on the ‘-’ button.
Play/Pause: Short press on multifunction button to Play/Pause.
Next: Press and hold the ‘ +’ button.
Previous: Press and hold the ‘-’ button.
Answer call/End call: Short press on the multifunction button when there is a call or during a phone call.
Charging: When low on battery, please charge via a Micro USB cable.
Audio cable: Connect the 3.5 mm audio cable to the headset and an audio player for wired music.
Phone call function cannot be used in this mode

PAIRING

Pairing with a phone or other device.
Make sure the headset is powered off.
Press and hold the multifunction button for 3 seconds to turn it on and enter pairing mode automatically.
If the headset is already connected to another device, you must first disconnect/forget the other device.
Note: Disconnecting from devices can also be forced by stepping out of Bluetooth range.
Bluetooth range is 10 meters.
The LED flashes blue and red alternately, waiting for connection.
Activate your phone’s or device’s Bluetooth function and search for the headset.
Select the headset on your device to connect it.

Maximum RF output (EIRP): <20dBm.
RF: 2.4 GHz

SIMPLIFIED EU DECLARATION OF CONFORMITY

The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows: Hereby, DistIT Services AB declares that the radio equipment type wireless device is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
All DoC’s can be found the product’s specific website, to access it go to: https://www.deltaco.se/produkter/xx (just change xx to the article number, for example https://www.deltaco.se/produkter/TWS-111)
Then click on the tab “Info/Certifikat”.
DistIT Services AB, Glasfibergatan 8, 5tr, 125 45 Älvsjö, Sweden