STREETZ TWS-113 True Wireless Earbuds Instruction Manual
- October 30, 2023
- STREETZ
Table of Contents
STREETZ TWS-113 True Wireless Earbuds
Product Information
The product is a USB-C device with LED indicators. It has three LEDs, with LED 1 being for USB-C connection, LED 2 being a general-purpose LED, and LED 3 being a 10-bit LED. The device can be controlled using Google or Siri voice commands.
Product Usage Instructions
- Connect the device to your phone or other compatible device using the USB-C port.
- Observe the LED indicators to determine the status of the device.
- Use voice commands through Google or Siri to control the device.
- To adjust the volume, use the volume controls on your connected device.
OVERVIEW
- Charging contact (USB-C)
- Touch button On/off/previous/next/answer/hang up
- Charging contacts
Power on and off
- Take the earbuds out of the charging case, they will automatically power on.
- Place the earbuds in the charging case to automatically power them off.
Charging
- Insert the earbuds into the charge case lo charge them.
- The charging contacts should be well connected.
- The LEDs on the earbuds are lit red while charging.
- When the earbuds are fully charged the LEDs change to white for 1 min and then tum off.
- Charge the charging case via a USB-C cable.
- The LEDs on the charge case flashes white while charging.
- When the charge case is fully charged the LEDs change to static white.
When the charge case has low battery, it win flash white.
Connect
First-time use: Take the earbuds out of the charging case, then put them
back into the charge case.
Then follow the steps for connecting:
- Take out the earbuds from the case. They will power on and connect to each other.
- One of the earbuds will flash red and white. The other earbud will flash white slowly (every 10 seconds).
- Connect to the earbuds from your phone/device.
Refer to your phone/device manual if needed.
Usage
Gently put the earbuds into your ears.
-
Answer and hang up a phone call
Press the button to answer or press 2 times hang up a phone call. Press and hold for 2 seconds to reject a call. -
Play/Pause
- Press the button 2 times on the right earbud to play/pause. Next song
- Press and hold button for 2 seconds on the right earbud for next song.
-
Previous sang
Press and hold button for 2 seconds on the left earbud for previous song. -
Volume
- Adjust the volume from your connected device(eg. phone). Voice assistant
- APress the button on either earbud 3 times to activate voice assistant. Works for Google assistant and Siri.
Safety instructions
- Never disassemble or modify the product to avoid damage to the product and to avoid danger.
- Do not store in extreme temperatures (below 0°C or over 45°C).
- Do not use harsh chemicals or strong detergents when you clean this product.
- Keep dry.
- To avoid hearing damage, make sure that the volume is set to low before connecting.
- Gradually turn up the volume until you reach a comfortable listening level.
DistIT Services AB, Glasfibergatan 8,125 45 Älvsjö, Sweden
DistIT Services AB, Suite 89, 95 Mortimer Street, London, W1W7GB, England