VIVO V2139 Smartphone User Guide
- June 5, 2024
- Vivo
Table of Contents
VIVO V2139 Smartphone User Guide
Welcome to vivo
This Quick Start Guide tells you how to set up your phone and use its key
features. For more detailed instructions, turn on your phone. then go to
Settings > About phone >
Customer service > Manual. You can also learn more useful information on
vino’s official website.
For legal information, go to Settings> About phone> Legal information.
For the FCC ID of this phone, please go to Settings> About phone > Status.
The features and images shown in this guide are for reference only. They may
differ from the actual product Is recommend & d to charge- the device for at
least 30 minutes before turning It on for the first time.
Special Instructions
• Ambient Light Sensor & Proximity Sensor
The ambient light sensor and proximity sensor of this device are hidden on the
right side of the receiver. To ensure the sensors function well, please keep
them away from any dust. grease or lightproof film. Using a third-party screen
protector may cause the sensors blocking alert or locked screen nonresponsive
to incoming calls. so you need to cut the film to expose the sensors.
Product Standard Accessories
Celt phone x 1
Charger x 1
USB cable x 1
Phone case x 1
Eject tool x 1
Warranty card x 1
Quick start guide x 1
Optimum operating temperature is 0–C to 35ºc and optimum storage temperature is -2o·c to 45ºc. Extreme heat or cold may damage your device or accessories.
Appearance
5G WiFi statement
Operation in the band 5150.5350MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
FCC statement
This device complies with part 15 of the FCC Rules Operation is subject to the
following two conditions:
(1) This device may not cause handful interference, and
(2) This device must accept any interference received. inducing interference
that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the vivo Mobile Communication Co.,Ltd . could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against handful interference in a residential installation.
This equipment generates, uses. and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SAR statement
This device meets the governments requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The SAR limit set by the FCC is 1.6W/Kg. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 15mm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Accessory available in marked and must be used to keep use distance 15mm from EUT to body-worn operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>