ORTUR Laser Master 2 Pro S2 Engraving Machine Instruction Manual

LASER MASTER 2 PRO S2

Safety Instructions

1. When the laser engraver is working, the operator must keep eye on it, should not leave it alone, just in case the materials being carved catch fire.
2. Do NOT operate laser without eye protection (Laser goggles).
3. Please set up laser engraver in the fireproofing area, with good ventilation. lf possible, we recommend that you could buy a Fire Extinguisher Ball and place it close to the machine.
4. Please keep minors (especially kids younger than 14 years old) away from this laser engraver. Minors of any age should not use this laser without direct Adult Supervision and proper eye protection.
5. Please avoid strongly impact on the machine.
6. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly.
7. Please do not touch the heat sink, when the laser engraver just stop working, it may scald your hands.
8. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows.
9. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.
10. The flame sensor is provided in an attempt to make our devices as safe as possible. No guarantees, written nor implied, are made as to the usability or functionality of the flame sensors.

Features

1. Ortur Laser Master 2 Pro is a upgraded model of Laser Master 2, which is a worldwide popular desktop laser engraver in 2020, well-known as its user-friendly experience, safe features and stable quality.
2. Laser Master 2 Pro is armed with the OLM-PRO-V10 Motherboard, the 3rd generation laser motherboard has more features, it supports flame detector, emergency stop button, and Ortur Offline Controller.
3. There is a G-sensor on the motherboard for active position protection. If the machine detects unauthorized movement, the laser beam will stop.
4. Laser Beam Safety Guard, if your computer system halted or USB cable disconnected, led to that the laser engraver stop moving, the laser beam will stop, to prevent fire.
5. Exposure Duration Detection and Limitation, when the laser engraver is working, if the motor don’t move, this extra safety function would turn off the laser to prevent fire.
6. Ortur Laser 1.5 Firmware has optimized the motion algorithm to support the faster speed engraving from 4000mm/min to 3000mm/min.
7. The laser module comes with a adjustable safety cover, which can be adjusted up and down according to requirements.
8. Mechanical Structure has been improved based on laser master 2, so as to support the faster speed carving/long-time working, its strong and durable.

Warning

1. Please set up laser engraver in the fireproofing area, with good ventilation.
2. When the laser engraver is working, the operator should not leave it unattended, just in case the materials catch fire.
3. Do NOT operate laser without eye protection (Laser goggles)
4. Do not touch the laser beam with your hands. Serious physical harm is possible if used improperly.
5. Avoid strongly impact on the machine.
6. Keep minors (especially kids younger than 14 yours old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection.

Dear Valued Customer

Thank you for purchasing Ortur product and hope you have a good experience.
lf you are having technical issues with our machine, we have a 24 hours team of customer support that would quickly address the problem. Please visit our ticketing system at https://ortur.tech/support or email us at Support@ortur3dprinter.com.
There is also a QR code for scanning to go to the ticketing system webpage.
When the ticket submitted to us, a reply will be promptly sent.

Regards
ORTUR

https://ortur.tech/support

https://ortur.tech/support| https://www.youtube.com/channel/UCvfgW64XBwJH7yd0E79s8Dg| https://www.instagram.com/orturofficial/
---|---|---
https://twitter.com/OrturOfficial| https://ortur.tech/olm2pros2/| https://ortur.tech/feedback
https://www.facebook.com/realortur| https://www.facebook.com/groups/orturusergroup
---|---

Dongguan Ortur Intelligent Technologies Co., Ltd.
Address: No. 1 Building, Ruijin Science and Technology Industrial Park, Changping, Dongguan 523558, Guangdong, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>