ORTUR YRR 2.0 Y-Axis Rotary Roller Instruction Manual

ORTUR YRR 2.0 Y-Axis Rotary Roller

Features

1. The Y rotary roller is used for laser engraving cylindrical objects of varying diameters.
2. This product is an accessory for the laser engraver of the same series, not an independent device.
   In order to maintain the highest efficiency, it needs to be used in conjunction with the laser engraver produced by our company.

Tips

1. This product can be used in conjunction with other brands of laser engraver.
   However, a perfect match cannot be guaranteed therefore the company will accept no responsibility for damage caused.

2. The assembly of the machine must be carried out on a flat surface.

Parts List

• Gear Position Plates ×2

• Motor Cable ×1

• Wheels ×2

• 2040 Aluminum Profile ×1

• Motor ×1

• Timing Belt ×1

• 16 Tooth Timing Belt Pulley ×1
  25 Tooth Timing Belt Pulleys ×2

• Guide Wheels Lifting Plate ×1

• Fixed Roller Holders ×2
  Removable Roller Holders ×2

• M5×20 Screws ×2
  & Bearings ×4
  & Lock Nuts ×2

• Rollers ×2

• Roller Baffle ×1

• Bearings ×4

• M5 Spacers ×2

• M5 Spring Washers×2 **

**

• M5 Nuts ×12

• M3×12 Thumb Screws ×2

• Guide Wheel Spacer ×1

• Non-slip Pads ×4
  

• 1.5mm Hex Wrench ×1
  2.0mm Hex Wrench ×1

• M3×6 Screws ×6

• M5×12 Screws ×12

• M5×20 Screws ×2

• 8-10 Wrench ×1

Assembly steps

Align These Pulleys and Bearings Horizontally

Method of Application of the Y Axis Rotary Roller

• There are 7 gears to choose from and adjust
  

• The minimum diameter of each gear, from right to left: 8mm, 20mm, 30mm, 45mm, 60mm, 80mm,100mm
  

The Assembly Drawing of Cone Object Laser Engraving Kit

Setting Procedure

1. Turn off the Automatic Home function.
   (Please skip this step if your laser engraver does not have this function.)
   1. Turn on the laser engraver, open the Laser GRBL software on computer, and connect the laser engraver **

   ---

   2. Unlock the laser engraver.
   
   3. Open Grbl Configuration.
   
   4. Change the value here to 0, to turn off the Automatic Return to Origin function.
   
   5. Write the change to the main board.
   6. Close the window.
   **

2. The installation method for marching with cantilever laser engraver.
   

3. The installation method for marching with frame laser engraver.
   

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>