ORTUR LU2-2 Laser Master 2 Pro Laser Engraving Cutting Machine Instructions
- June 5, 2024
- ORTUR
Table of Contents
ORTUR LU2-2 Laser Master 2 Pro Laser Engraving Cutting Machine
MODULES
Laser
Module Materials
|
LU2-2
|
LU2-4-LF
|
LU2-4-SF
|
Remark
---|---|---|---|---
1.6mm Plywood Plate
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4, S1000
15Lines/mm
| Engraving 10000mm/min,M4, S1000
15Lines/mm
|
Darker Colors, Better Results.
Cutting
400mm/min,M3,S1 000
| Cutting
300mm/min,M3,S1 000
2.8mm Plywood Plate
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4,
S1000
| Engraving 10000mm/min,M4,
S1000
|
Darker Colors, Better Results.
Cutting
150mm/min,M3,S1 000
| Cutting
100mm/min,M3,S1 000
4.06mm Plywood Plate
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Darker Colors, Better Results.
Cutting
130mm/min,M3,S1 000
| Cutting
100mm/min,M3,S1 000
5.18mm Plywood Plate
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Darker Colors, Better Results.
Cutting 100mm/min,M3,S1
000
| Cutting 150mm/min,M3,S1
000
5.96mm Plywood Plate
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Darker Colors, Better Results.
Cutting 100mm/min,M3,S1
000
| Cutting 100mm/min,M3,S1
000
3.06mm Paulownia Board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4,
S1000
| Engraving 10000mm/min,M4,
S1000
|
Darker Colors, Better Results.
Cutting
500mm/min,M3,S1 000
| Cutting
400mm/min,M3,S1 000
5.15mm Paulownia Board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4,
S1000
| Engraving 10000mm/min,M4,
S1000
|
Darker Colors, Better Results.
---|---|---|---|---
Cutting
150mm/min,M3,S1 000
| Cutting
250mm/min,M3,S1 000
8.30mm Paulownia Board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4,
S1000
| Engraving 10000mm/min,M4,
S1000
|
Darker Colors, Better Results.
Cutting
250mm/min,M3,S1 000
| Cutting
200mm/min,M3,S1 000
10mm Paulownia Board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving 10000mm/min,M4,
S1000
| Engraving 10000mm/min,M4,
S1000
|
Darker Colors, Better Results.
Cutting 150mm/min,M3,S1
000
| Cutting 150mm/min,M3,S1
000
6mm Pine board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Darker Colors, Better Results.
Cutting 150mm/min,M3,S1
000
| Cutting 100mm/min,M3,S1
000
9mm Pine board
|
Engraving 2000mm/min,M4,S 1000
12Lines/mm
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Darker Colors, Better Results.
Cutting
100mm/min,M3,S1 000
| Cutting
100mm/min,M3,S1 000
3mm Paperboard (Cardboard Box)
| Engraving
3000mm/min,M4,S 1000
| Engraving
9000mm/min,M4,S 400
| Engraving
9000mm/min,M4,S 400
|
Darker Colors, Better Results.
Cutting
200mm/min,S1000 Number of passes:
| Cutting
500mm/min,M3,S1 000
| Cutting
500mm/min,M3,S1 000
0.1mm Colored A4 Paper
| Engraving 3000mm/min,M4,S
600
| Engraving 9000mm/min,M4,S
350
| Engraving 9000mm/min,M4,S
350
|
The white paper is nonopaque, the
(Not White)| Cutting 1500mm/min,M3,S 1000| Cutting 3000mm/min,M3,S 1000|
Cutting 3000mm/min,M3,S 1000| result is not very good.
---|---|---|---|---
250g Kraft Paper
| Engraving 2000mm/min,M4,S
100
| Engraving 9000mm/min,M4,S
500
| Engraving 9000mm/min,M4,S
500
|
Darker Colors, Better Results.
Cutting 200mm/min,M3,S1
000
| Cutting 1000mm/min,M3,S
1000
| Cutting 1000mm/min,M3,S
1000
0.7MM Leather
| Engraving
3000mm/min,M4,S 1000
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Cutting
100mm/min,M3,S1 000
| Cutting
800mm/min,M3,S1 000
| Cutting
800mm/min,M3,S1 000
Non-woven fabrics (0.5mm, Dark
Color)
| Cutting 500mm/min,M3,S1
000
| Cutting 1500mm/min,M3,S
1000
| Cutting 1500mm/min,M3,S
1000
| Cannot cut the white one, it’s
transparent in fact.
5mm Acrylic
| Engraving
2000mm/min,M4,S 1000
| Engraving
10000mm/min,M4, S1000
| Engraving
10000mm/min,M4, S1000
|
Need coat the dark color paper onto the transparent Acrylic plate.
×
| Cutting 100mm/min,M3,S1 000| Cutting 100mm/min,M3,S1 000
Tin Wire| Melting| Melting| Melting| Cannot engrave.
Cobblestone
|
×
| Engraving 100mm/min,M4,S1
000
| Engraving 100mm/min,M4,S1
000
| Need coated with acrylic dye heat
transfer film.
---|---|---|---|---
Ceramic
|
×
| Engraving
100mm/min,M4,S1 000
| Engraving
100mm/min,M4,S1 000
| Need coated with acrylic dye heat
transfer film.
Powder Coated Metal
Paint Sprayed
| Engraving 2000mm/min,M4,S 1000| Engraving 10000mm/min,M4, S1000| Engraving 10000mm/min,M4, S1000| Engraved in the layer of powder coating.
Plated Metal
| Engraving 100mm/min,M4,S1
000
| Engraving 100mm/min,M4,S1
000
| Engraving 100mm/min,M4,S1
000
| It’s the surface color turned to be other color.
The Glossy finishing surface should be painted black by Marker Pen.
Anodised Aluminium| Engraving 100mm/min,M4,S1
000
| Engraving 100mm/min,M4,S1
000
| Engraving 100mm/min,M4,S1
000
Stainless Steel
|
×
| Engraving
100mm/min,M4,S1 000
| Engraving
100mm/min,M4,S1 000
copper| ×| ×| ×|
Pure aluminum| ×| ×| ×|
gold| ×| ×| ×|
silver| ×| ×| ×|
The results would be different in even same material with different finishing
or different colors, So you need to adjust the speed and power rate based on
different objects. Also, please adjust the focal length to be the best, make
the focal spot to be the smallest.
It couldn’t engrave or cut directly: Glossy metal plate, Transparent materials, Reflecting materials, Some materials in white color or pervious to light, etc. Then, you need to use the
marker pen to black it to engrave.