ORTUR LU3-20B Laser Master Instruction Manual
- June 1, 2024
- ORTUR
Table of Contents
- ORTUR LU3-20B Laser Master Instruction Manual
- Package Content
- Install the Laser Module
- HOW TO USE THE FOCAL GAUGE
- Connect Air Pump
- Air Flow 40L+2/min
- Maintain your Laser Module
- How to change the lens for LU3-20B
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ORTUR LU3-20B Laser Master Instruction Manual
Package Content
LU3-208 Laser Module
Adaptor
Airflow regulator
Thumb screw
air pump
Wrench
Lens
A pipe( ID:4mm QD:6mm)
Install the Laser Module
The laserline and the laser module are integrated. Connect the laser line to the port on the label with L first and bind the laser line to the marked position
HOW TO USE THE FOCAL GAUGE
Putthe focus gauge away before starting to engraving or cutting!
Connect Air Pump
First press the position indicated by the arrow, then put in the air pipe, and release the pressed position when the air pipe is deep to’the bottom.
Air Flow 40L+2/min
Please put the ai pipe into the regulating valve and press it to adjust the proper airflow.
Maintain your Laser Module
If the laser module is not used for a long time or is used for more than 1.0
hours,clean the lens with medical alcohol and cotton swab.
Unclean lenses will weaken the power of the laser.
How to change the lens for LU3-20B
These two parts can be tightened only when they are flat, otherwise the lens will be damaged.