ningbo OR1108-BT LED BT Speaker Instruction Manual
- June 5, 2024
- Ningbo
Table of Contents
ningbo OR1108-BT LED BT Speaker Instruction Manual
Thank you for choosing our product. We hope you will enjoy it very much.
Safety instructions
Read this manual carefully before putting the appliance into operation and keep this manual for future reference.
- Keep the device away from heat, direct sunlight and sharp edges.
- Keep the device away from naked flames.
- Do not insert any metal object into the device. Risk of short circuit!
- To avoid a static charge, do not use the device in an extremely dry climate.
- Do not repair the unit yourself but contact an authorised specialist.
Product Overview
Accessories included
1 pc USB charging cable
Charge Integrated Battery
This Bluetooth speaker is powered by integrated rechargeable lithium battery.
Charge the battery as follows:
insert the charging cable into the DC 5V socket on the unit. Connect the USB
plug into a PC or AC/DC adaptor. The LED indicator turns red and the battery
is being charged.
Pairing Orbit1108 to mobile phone or other device
Press and hold the on/off button until the indicator is flashing. Now the
speaker is ready for pairing.
Tips: Once this speaker is paired and connected to your mobile phone, next time when you switch on this speaker, it will connect to your mobile phone automatically as long as the Bluetooth in your mobile phone is on.
Button description
Troubleshooting
Technical Specifications
Bluetooth version: Jerry 5.1
Battery capacity: 300mah
Bluetooth distance: up to 10m
Power: 43W Charging time: 1.5hrs
Playing time at 50% volume: 2-2.5hrs
Warning:
You must select a qualified charger from a reliable source. You must charge
the Bluetooth speaker if it has not been used for more than 12 months.
Bluetooth wireless technology streams audio from all your device
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc and any use of such marks by Orbit Innovations is under license.
Other trade marks and trade names are those of their respective owners.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this device. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. lf this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>