CLAYMORE CLFN-V610WG Fan V600+ User Manual
- June 5, 2024
- CLAYMORE
Table of Contents
CLAYMORE CLFN-V610WG Fan V600+
Instructions
Fan power and wind speed control
- When the speed button is pressed, it changes in the order of 1-2 -3 -4 -OFF.
- The right indicator lights up when the fan is on.
Timer setting
- Afler starting the fan, press the timer button to set the timer for 1 hour -2 hours -3 hours -4 hours.
- The right indicator lights up when the timer is on.
Wind speed indicator
Timer indicator
Battery Level Check
When tum on the fan, timer indicator shows battery remaining for 5 seconds
Charging
- Open the rubber cover on the back of the main unit and connect the USB cable to the charging port to initiate charging.
- When charging, charging indicator will flash. When charing is finished, charging indicator will be off. ‘” Charging time may vary depending on the battery capacity of the product or external devices and the external environment
Installation
Align the tripod stand with the groove on the tripod connection and tum it to the right as shown in the figure. You can set the desired height by adjusting the angle of the leg.
Correct assembly
Tripod socket
Other than the tripod included, it can be mounted on other tripods as well.
Compatible with all accessories using 1/4-inch screws.
Up and down angle adjustment
The angle of the head can be adjusted up to 45 degrees
Left and right adjustment of head is not available. If you force it to adjust
the angle, it may damage the product
Handle, Stand & Hook
There is a handle on the back of the product for convenient portability. When
using it without a tripod, a stand can be used, and it can be used upside down
by connecting a carabiner
Caution
- When using product for the first time or storing for an extended period, please charge the battery fully.
- Overheating due to continuous use for an extended time may cause safety accidents such as product failure, fire, etc. Afler 3-4 hours of continuous use, discontinue use to allow product to cool.
- Do not put objects or fingers into the operating fan. (Be careful of hair getting caught.)
- Keep out of reach of children. (For children under the age of 10, please use under adult supervision.)
- Do not disassemble, modify, or repair on your own.
- Be careful of wet environments (bathroom) and discontinue use ~ it has water damage.
- If the temperature rises or the outer appearance defonns during charging, discontinue use and contact a customer center.
- Do not use tt in high temperature environments such as near fire or heating appliances. It may cause explosion or ignition.
- Do not bend beyond the allowed angle adjustment. This may cause damage to the product.
- Do not use in condttions exceeding the acceptable operating temperature range (-1o·c -40″C).
- Do not store or use in vehicles exposed to direct sunlight. It may cause explosion or malfunction.
- Do not charge tt in contact with easily flammable materials like carpets or blankets.
- After use, be sure to tum off the power for storage.
- If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit
Components
How to separate and clean the safety cage
- Hold the head as shown and turn the outer side of the front safety cage counterclockwise to separate it.
- Place the separated safety cage back into the head, turn it clockwise, and, when you hear the click, it is affixed. When the arrow on the bottom and the slot are aligned, it is mounted correctly
- The safety cage can be washed with water after separation. After washing, dry it well before re-mounting it onto the main unit .
- Be sure to turn off the power when separating the safety cage.
- Do not wash the main unit with water. Please wipe it with a wet wipe or a dry cloth.
- The blades cannot be separated
Warranty
- Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests.
- If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period: 1 year
Charged Service
- Damage caused when the warranty period is over
- Damage caused due to the user’s mishandling, abuse, or improper operation
- Damage caused by arbitrary or personal repair or disassemble in unauthorized service center
- Damage from input electricity or cable defect
- Damage caused by natural disaster
Specifications
Official Import Distributor
Bigtent Outdoor Equipment Ltd. www.bigtentoutdoors.com [email protected]
Manufacturer
Prism Co., Ltd. www.claymorelight.com / www.prismlight.co.kr [email protected] 101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36, Bucheon-si, Gyeonggi-do, Korea