CLAYMORE Enough 5 Crystal Style Balls User Manual

CLAYMORE Enough 5 Crystal Style Balls

Important Information

This product is a wired lighting fixture that is used by connecting the power cord to the power supply with an adapter. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased.

Caution

1. The adapter power supply for this product is AC 220V.

2. Do not use near high temperatures such as fires or heating equipments. It may cause product malfunction.

3. Be careful not to leave this product in the rain for a long time or submerge it in water.
   It may cause electric shock or product malfunction.

4. Do not store or use in vehicles exposed to direct sunlight. It may cause product malfunction.

5. Do not use if it exceeds the operating temperature range (-10 ° C to 40 ° C).

6. Please do not place in the reach of infants. It may cause swallowing of parts or injury.

7. Adult supervision is necessary when used by children. Misuse of light may cause injury or electric shock.

8. Do not insert any metal parts into the terminal block of the connector.
   It may cause heat, explosion or electric shock.

9. Do not disassemble or modify the product.

10. Do not touch the connector with wet hands. There is a danger of electric shock.

11. After use, be sure to turn off the power.

12. Do not forcefully fold. It may damage the product.

13. If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit.

14. Please keep in a dry place without moisture.

Components

Contents

Instructions

Supplying power

1. Connect Enough’s DC adapter (waterproof cap) to the power adapter (12V 3A).
2. Connect the power adapter (12V 3A) to the outlets(power supply).

※ If it does not fit well when connecting to the adapter, twist and push it all the way.

Caution

Power adapter
Enough 5: 12V 3A
Enough 7: 12V 3A
Enough 9: 12V 4A

※ Please use a dedicated adapter that meets product specifications.

ON/OFF

Press and hold the button on the product for 2 seconds to turn on the light.
When the power is ON, press and hold for 2 seconds again to turn off.

LED Color Change

When light is ON, press button shortly to adjust the light color in 6 mode.

[6 Light Mode]

5 STEP Dimming

When light is ON, press button shortly to adjust the brightness in 5 steps.

※ Light blinks once when Maximum and Minimum brightness is reached.

SOS-Flash

When light is ON, press and hold button 5seconds to begin SOS signal.
When SOS mode, press button to return to the previous light mode.

Installation

Using Carabiner
Carabiners can be attached to the hook on the top of the product. (Carabiner included)

with CLAYMORE App

You can control the lighting by using Claymore app.

Android OS

Open Play store
Search “CLAYMORE LANTERN” on the search bar in Play Store

Download and open the app

Open App store
Search “CLAYMORE LANTERN” on the search bar in App Store
Search “CLAYMORE LANTERN” on the search bar in App Store

Download and open the app

To install Claymore app, please scan the QR code or search ‘CLAYMORE LANTERN’ on the search bar in Play Store or App Store.

Register new device

When the product turns on, bluetooth paring starts automatically. During pairing, the Bluetooth indicator on the product will blink. After the pairing the indicator will flash without blinking.

Caution

Be sure to install Claymore app first, then search and register the device in the app.

※ If the product is directly connected using Bluetooth pairing in the smartphone settings rather than through the app, turn off the product and turn it on again, then install the app and re-register the product in the app.

After pairing with the product, operate the app in the order of ① to ⑥.

1. This is the first screen of the app. Press the plus button to register the product to be controlled.

2. When you click the + button, a list of products that can be registered appears. Select a product from the list.

3. After selecting a product, press the plus button at the bottom of the app.
   ※ When pairing is successful, the light of the product blinks 5 times.

4. Check the matching between the app and the product by pressing the buttons on the product button in the order of ① to ②.

5. Set the name and save .

6. When the registration confirmation window appears, click the Register button to complete product registration.

Main screen

1. Main screen composition

Lighting control

1. Lighting control screen
   CLAYMORE app can provide controlling light brightness in 20 steps, Light color temperature, and operation timer settings.

My mood

1. Create my mood screen
   You can save various color temperature(multiple selection) and Brightness as “my mood”
   

2. My mood list screen
   From my mood List screen, you can save various moods.
   

Specification

Breeze
6500K
4500K| 3000K
2500K| 1500K
1500K~3000K
Blightness| 580~4800Lm| 800~6500Lm| 980~7900Lm
Power consumption| 23.1W| 28.6W| 35.9W
Size| 7000×80×159mm| 7500×80×159mm| 8500×80×159mm
Weight| 750g| 876g| 1,115g
Input| 12V 3A| 12V 4A

Designed by Prism in Korea / Made in China

[How to replace the diffusion filter]

Detach
Hold the top of the filter to fix it, and turn it counterclockwise (to the left) with force.

Attach
Insert the diffusion filter and turn it clockwise (to the right).

※ If the diffusion filter is not easily detached, wear gloves with strong friction.

Warranty

1. Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
2. This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.

Free Service

1. Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge.
   Some shipping or handling charges may be involved.

2. arranty period: 1 year.

Charged Service

1. Damage caused when the warranty period is over.
2. Damage caused due to the user’s mishandling, abuse, or improper operation.
3. Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
4. Damage from input electricity or cable defect.
5. Damage caused by natural disaster.

Customer Support

Prism Co., Ltd.
221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
www.claymorelight.com · www.prismlight.co.kr · info@prismlight.co.kr

References

• CLAYMORE
• (주)프리즘 공식몰

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>