CLAYMORE 3FACE PRO Series Rechargeable Area Light User Manual

: June 17, 2024
: CLAYMORE

Table of Contents

Safety
Components
Contents
Operation
Installation
Warranty
Specification
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CLAYMORE 3FACE PRO Series Rechargeable Area Light

This portable light contains a Li-ion battery. Please follow the user manual before use.
If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications of this product will void the warranty.
Misuse of CLAYMORE products may cause user harm.

Safety

Caution

Do not use near high temperatures such as fires or heating equipments.
It may cause explosion or ignition.
This product is water resistant. However, if left in the rain for a long time, it may cause malfunction.
If the product gets soaked, please quickly wipe it off.
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion and malfunction.
Do not touch the light source directly as it may become very hot during use. Use handle to carry out.
Do not use if it exceeds the operating temperature range (-10 ° C to 40 ° C).
Please do not place in the reach of infants. It may cause swallowing of parts or injury.
Adult supervision is necessary when used by children. Misuse of light may cause injury or electric shock.
Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock.
Do not disassemble or modify the product.
Do not touch the connector with wet hands. There is a danger of electric shock.
After use, be sure to turn off the power.
Do not forcefully fold handle, It may damage hinge.
If the product is dropped or experiences physical shock, damage may be accumulated inside the productand unexpected malfunction may occur even during normal use.
Be careful not to apply physical shocks to the main unit.
Please keep in a dry place without moisture.

Components

Operation

LED Lantern Function

ON/OFF & Connecting Bluetooth & Battery check

Press and hold button 2sec to turn on light. (States indicator ON) Repeat to turn off light.
After the initial pairing, the lantern will automatically connect to the device when turned on light again.
Please refer to CLAYMORE Apps manual for more information.
Battery indicator shows battery remaining, When turning on the lights.

5 STEP Dimming

When light is ON, press button to increase brightness.
Repeat to decrease brightness.

Light blink once when Maximum and Minimum brightness is reached.

Stepless Dimming

When light is ON, press and hold button to increase brightness.
press and hold to decrease brightness.

Light blink once when Maximum and Minimum brightness is reached.

SOS-Flash

When light is ON, press and hold button 5seconds to begin SOS signal. Repeat to end signal and return to previous light mode.

LED Color Change

When light is ON, press button shortly to adjust the light color in 5 mode.

Cool	LED light with 6500K, cool light feels like ordinary fluorescent light
Warm	LED light with 3000K, warm light feels like ordinary gas lantern
Orange	LED light with 1500K orange color feels like candle light
White	LED light with 4500K,a neutral color of daylight and comfortable

feeling
Soft Warm| LED light with 2500K, mixed color of warm and orange, cozy and soft feeling

Mode Change

Operations

When light is ON, press button shortly to change mode. Front light ↔ Wide light

This lantern contains memory function that returns to the last setting when turn off and on.

Charging Method

Open rubber cover on the left of the lamp and connect USB-C type cable to charge. When charging, battery indicator will flicker.
If indicator does not blink and stays lit, it indicates charging is complete.

Battery indicator

| Charging| Motion
---|---|---
| ~25%
25~50%
50~75%
75%~| Flickers

| Fully charged| Stops

If charging continues over 24 hours, it’s automatically discontinue charging to protect battery.
Unplug cable and plug again to resume charging.
When the Type-C cable is connected to the product, the power bank function is activated, so the battery level indicator may light for 30 seconds even when the charger is not connected.

Power Bank Function

Connect your device (Phone, USB devices) to the USB-C port using USB-C to USB-C cable.
(charging commence automatically.)

Connecting Accessories (CLAYMORE MULTI WING, UF5)

You can connect MULTI WING, UF5 to expand light distribution.
Connect accessories(MULTI WING, UF5) to the OUTPUT connection port (USB-A) on both sides of the product.

MULTI WING, UF5(String lights) not included.

You can supply power to other CLAYMORE products from USB-A OUTPUT port.
Connect device to the USB-A port using USB-A to USB-C cable.
Press and hold button 2sec to start supplying power.
Repeat to stop supplying power.

Power bank function is not supported to other devices.

If you don’t use connecting accessories, turn off the OUTPUT control power button to reduce unnecessary standby power consumption. (status indicator OFF)

Reset Procedure

Installation

Hook & Handle & Kick Stand

You can fold the hook on the top and use it as a handle. It can be hung by connecting a carabiner or mounted on the floor/table.

Installation

Using tripod socket

Screw the camera tripod or lantern stand into the1/4 inch tripod sockets at right, left , and middle of MULTI FACE to fix it. It can be used in various ways by connecting to all products using 1/4 inch screws. ※ Lantern stand is not included.

Installation

Caution
When you connect MULTI FACE X and lantern stand, do not fix screws on both sides of the body, stand can be fall down.

Warranty

Item	CLAYMORE MULTI FACE L	CLAYMORE MULTI FACE X
Model No.	CLMF-3000LG/BK	CLMF-4000LG/BK
Seller
Date of Purchase

Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.

Free Service

Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge.
Some shipping or handling charges may be involved.
Warranty period: 1 year.

Charged Service

Damage caused when the warranty period is over.
Damage caused due to the user’s mishandling, abuse, or improper operation.
Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
Damage from input electricity or cable defect.
Damage caused by natural disaster.