CLAYMORE Enough 3 Camping Lantern Lighting Installation Guide

CLAYMORE Enough 3

User Manual

This product is a wired lighting fixture that is used by connecting the power cord to the power supply with an adapter. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased.

Caution

(1) Do not use near high temperatures such as fires or heating equipments. It may cause product malfunction.
(2) Be careful not to leave this product in the rain for a long time or submerge it in water.
It may cause electric shock or product malfunction.
(3) Do not store or use in vehicles exposed to direct sunlight. It may cause product malfunction.
(4) Do not use if it exceeds the operating temperature range (-10 ° C to 40 ° C).
(5) Please do not place in the reach of infants. It may cause swallowing of parts or injury.
(6) Adult supervision is necessary when used by children. Misuse of light may cause injury or electric shock.
(7) Do not insert any metal parts into the terminal block of the connector.
It may cause heat, explosion or electric shock.
(8) Do not disassemble or modify the product.
(9) Do not touch the connector with wet hands. There is a danger of electric shock.
(10) After use, be sure to turn off the power.
(11) Do not forcefully fold. It may damage the product.
(12) If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit.
(13) Please keep in a dry place without moisture.

1. Components

1. Hook

2. USB Port

3. Button

4. LED light

5. Diffusion filter

6. O Ring

7. Bluetooth status indicator

8. Color temperature control button

9. Brightness control button

10. Power button

2. Contents

CLAYMORE Enough        Case           Carabiner x 3        Manual

3. Instructions

Supplying power

Caution   ※ Please do not connect lower output than 5V2A.

Connecting to USB wall charger(5V2A) or Power bank(CLAYMORE product with power bank) to supply power.

• Connecting to Charger adapter (5V2A)

(1)

1. Enough3 USB port
2. Charger Adapter

(2)

1. Outlets(power supply)

• Connecting to Portable charger

1. Enough3 USB port
2. Portable charger (5V2A↑)

• Connecting to CLAYMORE product with power bank function

1. Enough3 USB port
2. CLAYMORE product with power bank function

※ Charger adapter, portable charger, CLAYMORE product with power bank sold separately.

ON/OFF

Press and hold the button on the product for 2 seconds to turn on the light.
When the power is ON, press and hold for 2 seconds again to turn off.

LED Color Change

When light is ON, press button shortly to adjust the light color in 6 mode.

[6 Light Mode] Mode 1

Cool

LED light with cool light feels like ordinary fluorescent light

| Mode 2

Warm

LED light with warm light feels like ordinary gas lantern

| Mode 3

Orange

LED light with orange color feels like candle light

---|---|---
Mode 4

White

LED light with a neutral color of daylight and comfortable feeling

| Mode 5

Soft Warm

LED light cozy and soft feeling

| Mode 6

CANDLE~

Breeze

The light swaying in the softly blowing wind

5 STEP Dimming

When light is ON, press button shortly to adjust the brightness in 5 steps.

※ Light blinks once when Maximum and Minimum brightness is reached.

SOS-Flash

When light is ON, press and hold button 5seconds to begin SOS signal.
When SOS mode, press button to return to the previous light mode.

4. Installation

• Using Carabiner

Carabiners can be attached to the hook on the top of the product. (Carabiner included)

1. Open

with App

You can control the lighting by using Claymore app.

Android OS

Open Play store Search “CLAYMORE LANTERN” on the search bar in Play Store

Download and open the app

iOS

Open App store Search “CLAYMORE LANTERN” on the search bar in App Store
Download and open the app

To install Claymore app, please scan the QR code or search ‘CLAYMORE LANTERN’ on the search bar in Play Store or App Store.

• Register new device

When the product turns on, bluetooth paring starts automatically. During pairing, the Bluetooth indicator on the product will blink. After the pairing the indicator will flash without blinking.

Caution

Be sure to install Claymore app first, then search and register the device in the app.

※ If the product is directly connected using Bluetooth pairing in the smartphone settings rather than through the app, turn off the product and turn it on again, then install the app and re-register the product in the app.

After pairing with the product, operate the app in the order of (1) to (6).

(1)

Register a new device

1. This is the first screen of the app. Press the plus button to register the product to be controlled.

(2)

Select the device to register

2. When you click the + button, a list of products that can be registered appears. Select a product from the list

(3)

Product registration

3. After selecting a product, press the plus button at the bottom of the app.

※ When pairing is successful, the light of the product blinks 5 times.

(4)

Product button
Product matching

4. Check the matching between the app and the product by pressing the buttons on the product button in the order of (1) to (2).

(5)

Set the device name

5. Set the name and save.

(6)

Confirm registration

6. When the registration confirmation window appears, click the Register button to complete product registration.

• Main screen

1. Main screen composition

① Help

② Bluetooth connection status

③ Registered product status display window (connection)

※ When selected, move to the lighting control screen

④ Registered product name

⑤ Brightness level

⑥ Color temperature status

⑦ Registered product status display window (disconnected)

※ When selected, reconnection starts.

⑧ New product registration

⑨ Multilingual support button

1. ENG
2. KOR
3. JP
4. Chinese(simplified)
5. Chinese(traditional)

⑩ Lighting ON/OFF button
→ON  →OFF

⑪ Timer setting status

⑫ Display my mood status

⑬ Registered product list

※ To delete registered product, select a list and click the delete button.

• Lighting control

1. Lighting control screen

CLAYMORE app can provide controlling light brightness in 20 steps, Light color temperature, and operation timer settings.

① Bluetooth connection status
connected disconnected

② SOS

※ 1500K(Orange) blinks during SOS

③ Brightness control bar (1 ~ 20 steps)
How to drag the control bar

④ Brightness level status display

⑤ Lighting ON/OFF button
→ON  →OFF

⑥ Go back button

⑦ Timer setting
When setting the timer, the remaining time is displayed.

※ Time setting 00hour : 00minutes
minute setting 00minutes : 00seconds

⑧ Light color temperature setting

⑨ Save button
(Save the current lighting control state as my mood)

※ Breeze mode can not be saved

• My mood

1. Create my mood screen

You can save various color temperature(multiple selection) and Brightness as “my mood”

① Brightness control bar
(1 ~ 20 steps)

② Brightness level status

※The brightness level is applied equally to the three color temperatures

③ Light color temperature setting
(Multiple selection possible)

④ Save current setting

⑤ My mood list

2. My mood list screen

From my mood List screen, you can save various moods.

① Delete my mood list

※ To delete my mood, select a list and click the delete button.

② Add my mood list

③ Edit my mood settings

④ Move list down

⑤ Move list up

5. Specification

Cool

| Bright| Warm| Soft Warm| Orange| Breeze
6500K| 4500K| 3000K| 2500K| 1500K|

1500K~3000K

Brightness| 230~2100Lm
Size| 2900×80×159mm
Weight| 401g
Input| USB 5V 2A

※ Operating time may vary depending on the battery capacity and external environment

Designed by Prism in Korea / Made in China

[How to replace the diffusion filter]

Detach   Hold the top of the filter to fix it, and turn it counterclockwise (to the left) with force.

Attach   Insert the diffusion filter and turn it clockwise (to the right).

※ If the diffusion filter is not easily detached, wear gloves with strong friction.

1. Holding
2. Top part
3. Diffusion filter
4. Attach
5. Detach

Warranty

1. Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
2. This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.

Free Service

1. Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge.
   Some shipping or handling charges may be involved.
   2)Warranty period: 1 year.

Charged Service

1. Damage caused when the warranty period is over.
2. Damage caused due to the user’s mishandling, abuse, or improper operation.
3. Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
4. Damage from input electricity or cable defect.
5. Damage caused by natural disaster.

Prism Co., Ltd.
221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
www.claymorelight.com · www.prismlight.co.kr · info@prismlight.co.kr

References

• CLAYMORE
• (주)프리즘 공식몰

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>