CLAYMORE CLL-600IV Lamp Cabin User Manual
- June 17, 2024
- CLAYMORE
Table of Contents
Cabin
CLAYMORE LAMP ‘Cabin’
CLL-600IV
CLL-600IV Lamp Cabin
User Manual
MADE IN KOREA
This portable light contains a Li-ion battery. Please follow the user manual
before use.
If any abnormality is found in the product, discontinue use and contact the
dealer or a service center where the product was purchased. Any modifications
of this product will void the warranty.
Misuse of CLAYMORE products may cause user harm.
Caution
-
When using product for the first time or storing for an extended period, please charge the battery fully.
-
Keep out of reach of children. (For children under the age of 10, please use under adult supervision.)
-
Do not disassemble, modify, or repair on your own.
-
Do not disassemble, modify the rechargeable battery. It may cause an accident or injury due to ignition, leakage, heat generation, or rupture.
-
Be careful in humid environments (e.g. bathroom) or flooding. Discontinue use in case of contact with water.
-
If the temperature rises or the outer appearance deforms during charging, discontinue use and contact a customer center.
-
Do not use it in high temperature environments such as near fire or heating appliances.
It may cause explosion or ignition. -
Do not touch with wet hands. There is a danger of electric shock.
-
Do not use in conditions exceeding the acceptable operating temperature range (-10°C~40°C).
-
Do not store or use in vehicles exposed to direct sunlight. It may cause explosion or malfunction.
-
Do not charge it in contact with easily flammable materials like carpets or blankets.
-
After use, be sure to turn off the power for storage.
-
If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks to the main unit.
Components
Operation
● LED Lantern Function
Power / Light mode control / Battery check
Press the button shortly to turn on light.
ON: Mood1 > Mood2 > Mood3 > Mood4 > OFF
※ Battery indicator shows battery remaining, When turning on the lights.
Brightness Control
When light is on, push and hold button to adjust brightness to increase
brightness. Push and hold button once again to decrease brightness.
※ Blinks once when Maximum and Minimum brightness is reached
[ 4 different light Mood ]
Mood 1 | Mood 2 |
---|---|
Breeze
The light swaying in the softly blowing wind| Sunset
The orangish red light of the evening glow
Mood 3| Mood 4
|
Full Moon
The light of the full moon brightly illuminates a dark night| Sunrise
The light of dawn
● Charging Method
Open rubber cover on the back and connect USB-C type cable to charge lantern. When charging, battery indicator will flicker. If indicator does not blink and stays lit, it indicates charging is complete.
Battery indicator | Charging |
---|---|
~25% |
25~50%
50~75%
75%~| Flickers
| Fully charged| Stops
● Power Bank Function
Open the rubber cover on the back of the main unit and connect the USB cable
to the charging port to initiate charging.
When charging, charging indicator will light up.
※ It is not possible to charge the product and use the power bank at the same
time.
※ Charging time may vary depending on the battery capacity of the product or
external devices and the external environment.
Specification
Product name | CLL-600IV |
---|---|
Model No. | CLAYMORE LAMP ‘Cabin’ |
Color temperature | 1,300K – 1,500K – 3,000K |
Brightness | 141×108.3×232.9mm |
Operating time | 556g |
Size | Li-ion 3.6V 6,700mAh (24.12Wh) |
Weight | USB 5V 2A |
Battery capacity | 5.5hour |
Charging time | 5V 2A |
Input | 30~640Lm |
Output | 6~55hour |
Origin | MADE IN KOREA |
Installation
You can put it on the table or use accessories to create a variety of presentations.
● Changing hook
Remove the attached ring hook by turning it clockwise.
Insert the provided pendant hook into the upper groove and turn it
counterclockwise to fix it with a clicking sound.
● Attaching leather strap
Attach the leather strap to both hooks as shown below.
● Using tripod socket
Screw the camera tripod, lantern stand into the1/4 inch tripod socket at the
bottom to fix it. It can be used in various ways by connecting to all products
using 1/4 inch screws.
※ Lantern stand is not included.
Warranty
Item | CLAYMORE LAMP ‘Cabin’ |
---|---|
Model No. | CLL-600IV |
Seller | |
Date of Purchase |
- Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
- This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center.
Free Service
- Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge. Some shipping or handling charges may be involved.
- Warranty period: 1 year.
Charged Service
- Damage caused when the warranty period is over.
- Damage caused due to the user’s mishandling, abuse, or improper operation.
- Damage caused by arbitrary or personal repair or disassemble in unauthorized service center.
- Damage from input electricity or cable defect.
- Damage caused by natural disaster.
Prism Co., Ltd.
www.claymorelight.com
www.prsmlight.cokr
info@prismlight.cokr
221, Pyeongcheon-ro, Bupyeong-gu,
Incheon, Republic of Korea
Documents / Resources
|
CLAYMORE CLL-600IV Lamp
Cabin
[pdf] User Manual
CLL-600IV, CLL-600IV Lamp Cabin, Lamp Cabin, Cabin
---|---