CLAYMORE 120H Capon Rechargeable Cap Light User Manual

User Manual
CLAYMORE Capon 120D
CLP-120(BK/RD)

Operation

ON/OFF

Press shortly to turn on light.
Repeat to turn off light.

Stepless Dimming

When light is ON, press and hold the button to increase brightness. Repeat to decrease brightness.
5 STEP Dimming

Hold down the button and press the MODE button to sequence to adjust brightness in 5 steps.
※ Light blink once when Maximum and Minimum brightness is reached.

Mode Change

When light is ON, press MODE button shortly to change
※ 3 different light modes (Focused>Red>Diffused)

Focused light
Long distance (narrow)

Red light(front)
Short distance (wide)

SOS-Flash

When the light is OFF, press the button for over 2seconds to access SOS signal.

[Sensor Mode]

When the light is ON, press ) the MODE button over 2 seconds to activate Sensor Mode.
Repeat to inactivate Sensor Mode.
Sensor mode automatic OFF function
To reduce unnecessary power consumption, the sensor mode will automatically turn off after 5hours when there is no movement.
To prevent false sensor detection, turn off the sensor when storing after use.
****  The sensor may not work under sunlight or in very bright places.

While the sensor operating, the sensor indicator will flash
When the Sensor is ON, wave your hand by the sensor to turn the light on and off.
※ Detection distances range: 1-5cm

Specification

|
Focused Light|
Diffused light(Red)| Diffused light(Cool)
---|---|---|---
Brightness
Operating time| MIN| MAX| MIN| MAX| MIN| MAX
25Lm
45hour| 380Lm
3hour| 1 Lm
60hour| 40Lm
4hour| 25Lm
45hour| 340Lm
3hour
Distance| 4m|  100m| |
Product name| CLAYMORE Cap on 120D| Size|
---|---|---|---
54×57.3×33.7mm
Model No.| CLP-120(BK/RD)| Weight| 55g
Battery capacity| Li-Polymer 3.7V 1,200mAh(4.44Wh)| Charging time| 2hour
Input| USB 5V 1A| Origin| MADE IN KOREA
Color temperature| Cool : 5700K / Red

Contents

Caution for long-term storage

• To prevent false sensor detection, turn off the sensor when storing after use.
• If the battery is completely drained, the battery indicator might not flash. If this happens, plug the USB cable back in or press the button to turn the battery indicator on again.
• For long-term storage, fully recharge the battery. (Repeat every six months)
• Please keep in mind that if stored below -10°C the battery life may be affected.
• Please keep it in a dry place without moisture.

This portable light contains Li-Polymer batteries. Please follow the user manual before use. If any abnormality is found in the product, discontinue use and contact the dealer or a service center where the product was purchased. Any modifications to this product will void the warranty. Misuse of CLAYMORE products may cause user harm.
Caution

1. Do not use near high temperatures such as fires or heating equipment. It may cause explosion and ignition.
2. This product is water-resistant. However, if left in the rain for a long time, it may cause malfunction. If the product gets soaked, please quickly wipe it off.
3. Do not store or use in vehicles exposed to direct sunlight. It may cause an explosion and malfunction.
4. Do not touch the light source directly as it may become very hot during use.
5. Do not use if the product exceeds the operating temperature range (-10 ° C to 40 °C).
6. Do not look directly into the LED light source.
7. Please do not place in the reach of infants. It may cause swallowing of parts or injury.
8. Adult supervision is necessary when used by children. Misuse of headlamps may cause injury or electric shock.
9. Do not insert any metal parts into the terminal block of the connector. It may cause heat, explosion, or electric shock.
10. Do not disassemble or modify the product.
11. Do not touch the connector with wet hands. There is a danger of electric shock.
12. After use, be sure to turn off the power. If not, it may cause leakage.
13. When adjusting the angle, please do not bend with force. It may cause damage to the product.
14. Dropping or impacting the product can cause damage to the inside of the product, resulting in unexpected failures in normal use. Be careful not to apply impact to the body.

Components

Charging Method

Open rubber cover and connect USB cable to charge lantern.

Battery Level Check

When charging, the battery indicator will flicker in 3 steps to show the battery remaining. (To see the remaining battery, press Dutton)
Battery level indicator

3366%
66-99%
Fully charged| Stop

※ This lantern contains a memory function that returns to the last setting when turn off and on.

Instructions

• Attaching to a Cap & Hard Hat

Fully insert clip to the visor of the cap/hard hat and adjust the angle to use properly.
※ Please check if the clip is fully attached to the cap bill before use.

• Angle adjustment
  Adjustable up to 180 degrees and easy to use with focused and diffused light.

• Lantern Hook
  Compatible with a carabiner or hang on string with a hook.

Warranty

1. Thank you for purchasing the CLAYMORE series of Prism Co., Ltd.
2. This product has passed strict quality-control tests. If the product is not functioning properly, please contact an authorized service center.

Free Service

1. Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or an authorized service center free of charge. Some shipping or handling charges may be involved.
2. Warranty period: 1 year.

Charged Service

1. Damage is caused when the warranty period is over.
2. Damage is caused due to the user’s mishandling, abuse, or improper operation.
3. Damage caused by arbitrary or personal repair or disassembly in the unauthorized service center.
4. Damage from input electricity or cable defect.
5. Damage caused by natural disaster.

Official Import Distributor

Bigtent Outdoor Equipment Ltd. www.bigtentoutdoors.com [email protected]  

Manufacturer

Prism Co., Ltd. www.claymorelight.com / www.prismlight.co.kr [email protected]
101-1501, Chunui-Technopark, Bucheon-ro 198 Road, 36,
Bucheon-si, Gyeonggi-do, Korea

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>