Leica ULTRAVID 10x42HD-PLUS BL HD Plus Binocular Instruction Manual

Leica ULTRAVID 10x42HD-PLUS BL HD Plus Binocular

POSSIBLE APPLICATIONS

The Leica Ultravid binoculars have hermetically sealed and nitrogen-filled magnesium housings. They are therefore suited for rough outdoor use. There is no need to be concerned with moisture as they are 100% waterproof to a depth of 5m and the internal optical system is not subject to fogging.

ATTACHING THE CARRYING STRAP AND THE PROTECTIVE EYEPIECE COVER
See illustration on the rear cover flap

Note: If you want to attach the protective eyepiece cover to the carrying strap, this must be done while attaching the carrying strap to the binoculars.

ATTACHING THE PROTECTIVE LENS CAPS
To attach the caps, their rubber ring is pulled over the binoculars from the lens side.

ADJUSTING THE EYECUPS / USE WITH AND WITHOUT GLASSES

The eyepiece cups (1) can be easily adjusted by turning them and they lock securely into the selected positions. They can also be completely removed for thorough cleaning. For viewing with eyeglasses (image A) they remain in the fully screwed-in position. For viewing without eyeglasses, they are unscrewed by turning them anticlockwise. Two positions are available for optimum adjustment (images B, C).

If the eyepieces are very dirty, it is recom­mended to remove the cups for cleaning (image D). To do this, they are simply pulled off while in the fully unscrewed position.

ADJUSTING THE EYEBASE
To set the eyebase, adjust the binoculars at the hinged joint. The left and right fields of view must merge and produce a single circular image

FOCUSING / DIOPTER ADJUSTMENT
With the Leica Ultravid binoculars the central focusing ring (4) is used to set the focus for variously distant objects. Compensation for individual defective vision for viewing without eyeglasses is made using the diopter ring (4), which is normally locked (Figure A). To unlock the two rings the diopter ring is pulled up (Figure B). Now, the central focusing ring only effects the focus of the left optical system, the diopter ring only that of the right system.

Using one of the rings, then focus the respective barrel on the desired subject. Continue by setting the optimal focus for the second barrel with the other ring. Pressing the diopter ring back down locks the set value. The set value can be conveniently read from the accurate scale on the diopter ring.

Notes:

• The diopter ring rotates freely, i.e. it can accidentally be rotated by more than 360° with respect to the central focusing ring. Depending on the latter‘s previous setting, the combined system‘s focusing range can be limited considerably by this. Therefore, take care to turn the diopter ring only as far as necessary for the eyesight adjustment.
• For viewing on just the left or the right side, the other eye should be kept closed or the appropriate half of the binoculars simply covered at the front on the lens.

INDICATIONS ON THE SCALE
As long as the two halves of the drive are coupled together, the binoculars are permanently adjusted to your eyesight, irrespective of the focusing distance to an object. You need to make the adjustment only once. If other people use your binoculars, they may have to alter the setting. Simply note your personal setting on the scale; when someone else has used them, you can reset the binoculars in a matter of seconds. The distance between two divisions on the scale represents a difference of approx. one diopter of correction being applied to the left and right eye.

CARE AND MAINTENANCE

Your Leica Ultravid binoculars need no special maintenance. Use a soft lens brush or a blower to remove large particles of dirt, sand, etc. To remove fingerprints etc., first wipe the eyepiece and lens with a damp cloth, then dry them with a piece of clean, soft chamois leather or lint-free cloth. If the binoculars, particularly the rotating eyecups, are very dirty, simply rinse them under a running faucet. Always rinse off salt water. Moisture inside the central focusing unit (visible through the scale window) will dry quickest when the two rings (3/4) are unlocked. Alcohol and other chemical solutions must not be used.

Attention: Do not apply too much pressure when wiping strongly soiled lens surfaces. Even though the coating is very tough, sand and salt crystals can cause scratches.

ACCESSORIES

• Tripod adapter with 1/4“ thread ………… 42220
• Floating carrying strap, orange …………. 42163

REPLACEMENTS

Should you need replacements for your binoculars, such as eyecups, covers, or a strap, please turn to our Customer Care department or your national Leica agent. The addresses are listed in the Warranty Card.

TROUBLE SHOOTING GUIDE

TECHNICAL DATA

LEICA PRODUCT SUPPORT

Should you have any technical questions regarding the use of Leica products, the Leica Information Service will be happy to answer in writing or by phone, fax, or e-mail:
Leica Camera AG
Product Support / Software Support
Am Leitz-Park 5
D-35578 Wetzlar
Tel.: +49(0)6441-2080-111 /-108
Fax: +49(0)6441-2080-490
info@leica-camera.com/
software-support@leica-camera.com

LEICA CUSTOMER CARE
For service of your Leica equipment and in case of neccessary repairs please contact the customer services of Leica Camera AG or of any national Leica agency (see Warranty Card for address list). Ask your authorized dealer and Leica specialist for advice.
Leica Camera AG
Customer Care
Am Leitz-Park 5
D-35578 Wetzlar
Tel.: +49(0)6441-2080-189
Fax: +49(0)6441-2080-339
customer.care@leica-camera.com

LEICA ULTRAVID 42 HD-PLUS

Technical data

I As at November 2014 I Specifications are subject to change without notice
Leica Camera A I Am Leitz-Park 5 I D-35578 Wetzlar I Phone +49 (0) 6442-2080-0 I Fax +49 (0) 6442-2080-333 I info@leica-camera.com I www.leica-camera.com

References

• Leica Camera Wetzlar Germany – Official | International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>