brennenstuhl 7050 M Mobile LED Light Instruction Manual
- June 5, 2024
- brennenstuhl
Table of Contents
brennenstuhl 7050 M Mobile LED Light
Operating Instructions
Mobile LED Light
Attention: Before using the product, please carefully read the operating instructions and store them in a proper location!
SAFETY INSTRUCTIONS
- Always check the product for damage before use. Never use the product in case of any damage. If this is the case, please refer to an electrician or the manufacturer’s service address.
- Do not use the product in potentially explosive atmospheres – danger of death!
- Keep the floodlight away from children. Children are not aware of the risks imposed by electric current.
- Please never look directly into the light.
- A destroyed protective cover cannot be replaced. The floodlight has to be disposed of.
- The external flexible cable of this lamp cannot be exchanged; if the cable is damaged, the lamp has to be scrapped.
Not suitable for applications with external dimmers. If the minimum distance is not complied with, illuminated objects may overheat.
TECHNICAL DATA
| Type | JARO 7050 M | JARO 9050 M |
|---|---|---|
| Mains plug | Schuko | Schuko |
| Power consumption (W) | 80W | 100W |
| Max. power (A) | 0.35A | 0.44A |
| Power factor | > 0,9 | > 0,9 |
| Max projected area (cm²) | 1366.8 | 1892 |
| Dimensions (mm) | 402 x 204 x 340 | 473 x 223 x 400 |
| Dimensions of protective cover (mm) | 248.8 x 171.8 x 5 | 353 x 253 x 5 |
| Weight (kg) | 4.77 | 5.87 |
- Protection class: I
- IP class/shock resistance: IP65, IK08
- Nominal voltage: 220-240 V~ 50/60 Hz
- Temperature range: -20 °C to +50 °C
- Connection cable: H07RN-F 3G1,0
This product is suitable for indoor and outdoor lighting purposes.
COMMISSIONING
Place the floodlight on a dry and level surface. Use the switch (A) on the
back to switch the floodlight on. Press the switch multiple times to set the
brightness to 100 %, then 50 % and then “off ”. The lower the brightness
selected, the longer the floodlight will burn.
CONTROL ELEMENTS
TRIPOD MOUNTING
By means of the holes in the holding bracket, the floodlight can be mounted on
a Brennenstuhl tripod (fastening material not included in the scope of
delivery).
MAINTENANCE
ATTENTION! The LED lamp does not contain components that require maintenance. The light source in this lamp cannot be replaced; if the light source has reached the end of its service life, the entire lamp has to be replaced. The lamp may not be opened.
CLEANING
Before cleaning, disconnect the floodlight from the mains power. Do not use
solvents, caustic cleaning agents or similar products. Only use a dry or
slightly moistened cloth for cleaning.
DISPOSAL
Dispose of electric appliances in an environmentally friendly manner! Electric appliances must not be disposed of in household waste! The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment rules that used electric appliances should be collected separately and recycled in an environmentally friendly manner. For possibilities of disposal of the used appliance, please contact your local or municipal administration.
EU DECLARATION OF CONFORMITY
The EU declaration of conformity is deposited at the manufacturer.
ADRESSES
Hugo Brennenstuhl GmbH & Co. KG Seestraße 1 – 3 · D-72074 Tübingen H.
Brennenstuhl S.A.S. 4 rue de Bruxelles ∙ F-67170 Bernolsheim lectra technik ag
Blegistrasse 13 · CH-6340 Baar For more information please visit the
Service/FAQ section on our homepage,
www.brennenstuhl.com.