levoit Core 200S Smart True HEPA Air Purifier User Manual

Core 200S Smart True HEPA Air Purifier
User Manual

Questions or Concerns?
Please contact us at [email protected].

Package Contents

1 x Smart Air Purifier
1 x True HEPA Filter (Pre-Installed)
1 x User Manual
1 x Quick Start Guide

Specifications

Operating
Conditions| Temperature: -10°–40°C / 14°–104°F
Humidity: < 85% RH
Noise Level| 24–45dB
Dimensions| 20.5 x 20.5 x 32 cm /8.1 x 8.1 x 12.6 in
Weight| 3 kg / 6.6 lb

Note: To access additional smart functions, download the free VeSync app (see page 3).
READ AND SAVE THESE INSTRUCTIONS

SAFETY INFORMATION

To reduce the risk of fire, electric shock, or another injury, follow all instructions and safety guidelines.
General Safety

• Only use your air purifier as described in this manual.
• Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier away from water, and wet or damp areas. Never place in water or liquid.
• Do not use in excessively humid areas.
• Keep the air purifier away from heat sources.
• Do not use where combustible gases, vapors, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
• Keep 1.5 m / 5 ft away from where oxygen is being administered.
• Supervise children when they are near the air purifier.
• Do not place anything into any opening on the air purifier.
• Do not sit or place heavy objects on the air purifier.
• Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
• Always unplug the air purifier before servicing (such as changing the filter).
• Do not use the air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact Customer Support (see page 19).
• WARNING: To reduce the risk of fire or electric shock, do not use this air purifier with solid-state speed controls (such as a dimmer switch).
•  Not for commercial use. Household use only.

Power & Cord

• Keep the air purifier near the outlet it is plugged into.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
• Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.

Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

GETTING TO KNOW YOUR SMART AIR PURIFIER

Q. True HEPA Filter

CONTROLS

On/Off Button

• Turns the air purifier on/off.
• Press and hold to configure the air purifier. See the VeSync in-app instructions for more information.

WiFi Indicator

• Turns on, off, or blinks to indicate configuration status. See the VeSync in-app instructions for more information.

Fan Speed Button

• Cycles through fan speeds: I (low), II (medium), and III (high).
• Tapping the Fan Speed Button while the air purifier is in Sleep Mode will exit Sleep Mode.

Sleep Mode Button

• Turns Sleep Mode on (see page 10).
• Press and hold for 3 seconds to reset the Check Filter Indicator.

Timer Button

• Cycles through timer options (see page 11).

Night Light Button

• Turns the night light on/off (see page 11).

Display Off Button

• Turns the display off (not including the night light).
• Tap any button (except) to turn the display back on.

Display Lock Button

• Prevents current settings from being changed (see page 11).
• Blinks when any other button is tapped to indicate that Display Lock is on.

Check Filter Indicator

• Lights up when the filter should be checked (see Check Filter Indicator, page 14).
• Reset the Check Filter Indicator light by pressing and holding the Sleep Mode button for 3 seconds.

GETTING STARTED

1. Flip the air purifier over. Twist the filter cover anticlockwise and remove it. [Figure 1.1]
2. Remove the filter from its plastic packaging and place the filter back into the air purifier. [Figure 1.2]
3. Replace the filter cover and twist clockwise to lock. [Figure 1.3]
4. Place the air purifier on a flat, stable surface with the display facing up. Allow at least 38 cm / 15 of clearance on all sides of the air purifier. Keep away from anything that would block airflow, such as curtains. [Figure 1.4]

VESYNC APP SETUP

1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store. [Figure 2.1]
2. Open the sync app. Log In or Sign Up.
3. Follow the in-app instructions to set up your smart air purifier.

http://onelink.to/8d4hsx

CONNECT WITH AMAZON ALEXA OR GOOGLE ASSISTANT™

You can use the VeSync app to connect your smart air purifier to Amazon Alexa or Google Assistant™. Please follow in-app instructions to set up your voice assistant.
Note: You must create your own VeSync account to access voice assistants.

USING YOUR SMART AIR PURIFIER

Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features.

General Operation

1. Plugin and tap to turn on the air purifier. The fan will start on a level I. [Figure 3.1]

2. Optionally, tap to change fan speed between I, II, and III.
   Note:
   • The indicators are not buttons and cannot be used to change the fan speed.
   • The fan speed indicators will light up when active.
   • Fan speed III is the loudest but cleans air the quickest.
   • For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (level III) for 15–20 minutes before using a lower speed.
   • To effectively clean air, keep windows and doors closed while the air purifier is on.

3. Tap to turn off the air purifier.

Sleep Mode
Sleep Mode dims all icons to half brightness and operates quietly by using a fan speed lower than fan speed I.
Tap to turn Sleep Mode on.
Note:

• Tapping will exit Sleep Mode.
• You can still adjust the night light while the air purifier is in Sleep Mode.

Timer
You can manually set a timer for 2, 4, or 8 hours using the display buttons. You can also set a timer for 1 to 24 hours through the VeSync app.

1. Tap repeatedly to select a time. The timer will start automatically.
   Note:
   • The indicators are not buttons and cannot be used to select a time.
   • The timer indicators will light up blue when active.
   • indicator lights up when a timer is set up through the app.

2. Once the timer has finished, the air purifier will turn off.

3. To cancel a timer, tap until all-timer indicators are off.
   Note:
   • You can change the fan speed at any time while the timer is on.
   • The timer will restart if the time is changed.

Night Light
You can choose between 2 night light brightness levels, even when the air purifier is turned off (as long as it is still plugged in).

1. Tap once to turn on the light.
2. Tap a second time to dim the brightness to half.
3. Tap a third time to turn off the light.

Note: Turning off the display will not turn off the night light.

Display Lock
Locking the display prevents settings from being accidentally changed. Buttons will not respond to being tapped.

1. Tap and hold for 3 seconds to lock/unlock the display.
2. While the display is locked , will light up. If other buttons are tapped , will blink 3 times.

Memory Function
Even while turned off, as long as the air purifier is plugged in, it will remember its previous fan speed, Sleep Mode, and Display Lock settings.
When unplugged, the air purifier will remember the fan speed and Sleep Mode, but not Display Lock or Display Off.
Note: The memory function does not work with timers or night light settings.

VESYNC APP FUNCTIONS

The sync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available.
Remote Control

• Change any air purifier settings through the app, even while the Display Lock is on.

Schedules

• Create and customize schedules for your air purifier to match your routines.

Timer Function

• Set a timer setting between 1 and 24 hours.

Filter Replacement Info

• Keep tabs on the remaining filter life by checking the filter life percentage in the app.
• Shop for replacement filters.

ABOUT THE FILTER

The air purifier uses a 3-stage filtration system to purify air.

A. Nylon Pre-Filter

• Captures large particles such as dust, lint, fibers, hair, and pet fur.
• Maximizes the filter’s life by protecting it.

B. True HEPA Filter

• Removes at least 99.97% of airborne particles 0.3 micrometers (µm) in diameter.
• Filters small particles such as mold spores, tiny dust particles, smoke particles, and allergens such as pollen, dander, and mites.

C. High-Efficiency Activated Carbon Filter

• Physically adsorbs smoke, odors, and fumes.
• Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulfide, and volatile organic compounds (VOCs).

Clean Air Delivery Rate
This air purifier has a Clean Air Delivery Rate of 110 cubic feet per minute (CFM), or 170 m³/h.
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that it produces per minute. This is based on the removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean.  The rating is measured at the air purifier’s highest speed.

Air Change per Hour
The air change rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour are calculated on the recommended room size, assuming 2.4 m / 8 ft ceilings. For smaller rooms, the air change per hour will increase. The Core 200S has an air change per hour of 5, which means it can change air 5 times each hour at the max speed. This air purifier is recommended for use in a single, closed room up to 35 m² / 376 ft².
Note: To effectively clean air, keep windows and doors closed while the air purifier is on.

Humidity
Moisture may damage the filters. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter will become moldy.
Note: Water or moisture will allow mold to grow. Air purifiers cannot solve an existing mold problem, only capture airborne mold spores and reduce odors.

Essential Oils
Do not add essential oils to the air purifier or filter. The filter will become damaged by the oil and will eventually release an unpleasant smell. Do not use diffusers near the air purifier.

CARE & MAINTENANCE

Cleaning the Air Purifier

• Unplug before cleaning.
• Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or flammable cleaning agents.

Check Filter Indicator

will light up as a reminder to check the filter. Depending on how often you use the air purifier, the indicator should turn on within 6–8 months. You may not need to replace
your filter yet, but you should check it when turns on.

Cleaning the Filter
The outer pre-filter should be cleaned every 2–4 weeks to increase efficiency and extend the life of your filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles.
Do not clean the filter with water or other liquids. [Figure 4.1]

Resetting the Check Filter Indicator
Reset the Check Filter Indicator when:
A. lights up red.

1. Replace the filter (see page 15).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
   will blink 3 times and turn off once successfully reset.

B. The filter was changed before lit up.

1. Press and hold for 3 seconds.
   will blink 3 times and turn off once successfully reset.

Note: You can also reset the Check Filter Indicator in the VeSync app.

Nylon
Pre-Filter| Every
2–4 weeks| Use a soft brush or vacuum hose [Figure 4.1]| 6–8 months
True HEPA & High-Efficiency Activated Carbon  Filters| Do not clean

When Should I Replace the Filter?
Check the VeSync app to see your remaining filter life.
The filter should be replaced every 6–8 months. You may need to replace your filter sooner or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off.

You may need to replace your filter if you notice:

• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odors
• A visibly clogged filter

Note:

• Remember to reset after changing the filter (see page 14).
• To maintain the performance of your air purifier, only use official Levoit filters. To buy replacement filters, go to Amazon and search B08H214WGW.

Replacing the Filter

1. Unplug the air purifier. Flip the air purifier over and remove the filter cover (see Getting Started, page 8).
2. Remove the old filter.
3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier. [Figure 4.2]
4. Unwrap the new filter and place it into the housing (see Getting Started, page 8).
5. Replace the cover. Plugin the air purifier.
6. Reset the Check Filter Indicator (see page 14).

Storage
If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastiJc packaging and store them in a dry place to avoid moisture damage.

TROUBLESHOOTING

An air purifier will not turn
on or respond to button
controls.| Plugin the air purifier.
Check to see if the power cord is damaged. If so, stop using the air purifier and contact Customer Support (see page 19).
Plug the air purifier into a different outlet.
The air purifier may be malfunctioning. Contact Customer Support (see page 19).
Airflow is significantly
reduced.| Make sure the filter is removed from its packaging and properly in place (see page 8).
Tap to increase the fan speed.
Make sure there is at least 38 cm / 15 in of clearance on all sides of the air purifier.
The pre-filter may be clogged by large particles, such as hair or lint, blocking airflow. Clean the pre-filter (see page 14).
Replace the filter (see page 15).
An air purifier makes an
unusual noise while the
the fan is on.| Make sure the filter is properly in place with plastic packaging removed (see page 8).
Make sure the air purifier is operating on a hard, flat, level surface.
Replace the filter (see page 15).
The air purifier may be damaged, or a foreign object may be inside. Stop using the air purifier and contact Customer Support (see page 19). Do not try to repair the air purifier.
Strange smell coming
from the purifier.| Clean the filter or replace it if necessary.
Make sure not to use your air purifier in an area with high humidity or while diffusing essential oils.
Poor air purification
quality.| Tap to increase the fan speed.
Make sure no objects are blocking the sides or top of the air purifier (the inlet or outlet).
Make sure the filter is removed from its packaging and properly in place (see page 8).
Close doors and windows while using the air purifier.
Make sure the room is smaller than 35 m² / 376 ft². The air purifier may not be as effective in larger rooms.
Replace the filter (see page 15).
is still on after
replacing the filter.| Reset the Check Filter Indicator (see page 14).
 has not turned on
within 8 months.| is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 14). If you don’t use your air purifier often , will take longer to turn on.
turned on before 6
months.| is a reminder for you to check the filter and will light up based on how long the air purifier has been used (see page 14). If you run your air purifier frequently , will turn on sooner.

VESYNC APP TROUBLESHOOTING

My smart air purifier isn’t connecting to the VeSync app.

• During the setup process, you must be on a secure 2.4GHz WiFi network. Confirm that the network is working correctly.

• Make sure the WiFi password you entered is correct.
  ◦ There should be no spaces at the beginning or end of the password.
  ◦ Test the password by connecting a different electronic device to the router.
  ◦ If you’re manually typing in the SSID and password, double-check that both are entered correctly.

• Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.

• Your router may need to be at a higher location, away from obstructions.

• Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.

• If you’re using a VPN, make sure it’s turned off while setting up your air purifier.

• Disable portal authentication for your WiFi network. If portal authentication is enabled, the air purifier will not be able to access your WiFi network, and the setup will fail.

Note: Portal authentication means that you need to sign in to your WiFi network through a web page before you can use the Internet.

My air purifier is offline.

• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network connection is working.
• Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or tap and hold (Android™), then tap Delete.
• Reconfigure the air purifier with the VeSync app.

Note: Power outages, internet outages, or changing WiFi routers may cause the air purifier to go offline.

WARRANTY INFORMATION

Terms & Policy
Arovost Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between product categories.
If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

CUSTOMER SUPPORT

Provost Corporation
1202 N. Miller St., Suite A
Anaheim, CA 92806
USA

Email: [email protected]
*Please have your order invoice and order ID ready before contacting Customer Support.

Trademark Information
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Google and Google Play are trademarks of Google LLC.
Apple App Store is a trademark of Apple Inc.
Wi-Fi® is a registered trademark of Wi-Fi Alliance®.

If your problem is not listed, please contact Customer Support
Connect with us @LevoitUK

References

• . Spend less. Smile more.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>