levoit Core 300S Smart True HEPA Air Purifier User Manual

levoit Core 300S Smart True HEPA Air Purifier User Manual

support.eu@levoit.com

Package Contents

1 x Smart Air Purifier
1 x True HEPA 3-Stage Original Filter (Pre-Installed)
1 x User Manual
1 x Quick Start Guide

Specifications

Note: To access additional smart functions, download the free VeSync app (see page 8).

READ AND SAVE THESE INSTRUCTIONS

SAFETY INFORMATION

To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.

General Safety

• Only use your air purifier as described in this manual.
• Do not use without removing the plastic wrap from the filter. The air purifier will not filter air, and may overheat, causing a fire hazard.
• Do not use the air purifier outdoors.
• Keep the air purifier away from water, and wet or damp areas. Never place in water or liquid.
• Do not use in excessively humid areas.
• Keep the air purifier away from heat sources.
• Do not use where combustible gases, vapours, metallic dust, aerosol (spray) products, or fumes from industrial oil are present.
• Keep 1.5 m / 5 ft away from where oxygen is being administered.
• Do not place anything into any opening in the air purifier.
• Do not sit or place heavy objects on the air purifier.
• Keep the inside of the air purifier dry. To prevent moisture buildup, avoid placing in rooms with major temperature changes or underneath air conditioners.
• Always unplug the air purifier before servicing (such as changing the filter).
• WARNING: To reduce the risk of fire or electric shock, do not use this air purifier with any solid-state speed controls (such as a dimmer switch).
• Not for commercial use. Household use only.
• This air purifier can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the air purifier. Cleaning and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Power & Cord

• Keep the air purifier near the outlet it is plugged into.
• Never place the cord near any heat source.
• Do not cover the cord with a rug, carpet, or other covering. Do not place the cord under furniture or appliances.
• Keep the cord out of areas where people walk often. Place the cord where it will not be tripped over.

Electromagnetic Fields (EMF)
Your Levoit air purifier complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.

GETTING TO KNOW YOUR SMART AIR PURIFIER

• A. Fan Speed Indicators
• B. Fan Speed Button
• C. On/Off Button
• D. Sleep Mode Button
• E. Timer Button
• F. Timer Indicator
• G. Wi-Fi® Indicator
• H. Auto Mode Button
• I. Air Quality Indicator Rings
• J. Display Off Button
• K. Check Filter Indicator
• L. Display Lock Button
• M. Air Outlets
• N. Housing
• O. Air Inlets
• P. AirSightTM Plus Laser Dust Sensor
• Q. Anti-Skid Pads
• R. Filter Cover
• S. True HEPA 3-Stage Original Filter

CONTROLS

GETTING STARTED

1. Flip the air purifier over. Twist the filter cover anticlockwise and remove it. [Figure 1.1]
2. Remove the filter from its plastic packaging and place the filter back into the air purifier with the handle facing up. [Figure 1.2]
3. Replace the filter cover and twist clockwise to lock. [Figure 1.3]
4. Place the purifier on a flat, stable surface with the display facing up. Allow at least 38 cm / 15 inches of clearance on all sides. Keep away from anything that would block airflow, such as curtains.

VeSync App Setup

1. To download the VeSync app, scan the QR code or search “VeSync” in the Apple App Store® or Google Play Store.
2. Open the VeSync app. Log In or Sign Up.
3. Follow the in-app instructions to set up your smart air purifier.

http://barcode.vesync.com/?v=new-1-1

Connect with Amazon Alexa or Google Assistant™
You can use the VeSync app to connect your smart air purifier to Amazon Alexa or Google Assistant™. Please follow in-app instructions to set up your voice assistant.

USING YOUR SMART AIR PURIFIER

Note: Using the VeSync app allows you to control your air purifier remotely and access additional functions and features.

1. Plug in and tap to turn on the air purifier. The fan will start on level I. [Figure 2.1]

2. Optionally, tap  to change fan speed between I, II, and III.
   Note:
   · The indicators are not buttons and cannot be used to change the fan speed.
   · The fan speed indicators will light up when active.
   · Fan speed III is the loudest, but cleans air the quickest.
   · For best results, or to address a specific air quality issue such as smoke, run the air purifier at high speed (level III) for 15­20 minutes before using a lower speed.
   · To effectively clean air, keep windows and doors closed while the air purifier is on.

3. Tap to turn off the air purifier.

Memory Function
When the air purifier is plugged in and turned off, it will remember its previous fan speed, Sleep Mode, Auto Mode, Display Lock, and Display Off settings. When the air purifier is unplugged and turned off, it will only remember its previous fan speed, Sleep Mode, and Auto Mode.

Note: The air purifier will remember the last timer setting chosen (1­12 hours), but it will not automatically resume the timer. You will need to reselect the timer after the air purifier is turned back on.

Sleep Mode
Sleep Mode operates quietly by using a fan speed lower than fan speed 1.

1. Tap to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after 3 seconds if no other buttons are pressed.

Note:

• When the display is turned off, press any button (except ) to turn the display back on. If you don’t press another button, the display will turn off again after 3 seconds.
• The Check Filter Indicator will still turn on and stay on if it’s time to check your filter (see page 14).

Auto Mode
Auto Mode uses Air Sight Plus, a smart laser dust sensor inside the air purifier, to adjust the fan speed automatically based on air quality. For example, if the air quality is bad, the fan will automatically be set to high speed.

Note:

• The air purifier will take 5 seconds to detect the air quality each time it is turned on. During this time, the air quality indicator rings will be blue. After 5 seconds, the air quality indicator rings will change colour based on the detected air quality.
• The VeSync app also supports additional auto modes: Quiet Auto Mode and Efficient Auto Mode (see page 11).

Standby Mode
The air purifier is in Standby Mode when it is turned off, but plugged in.

Note: Display lock can be used while the air purifier is in Standby Mode to keep the air purifier from turning back on. The laser dust sensor will still detect the surrounding air quality and give you updates in the VeSync app.

Timer
You can set a timer for 1­12 hours.

1. Tap repeatedly to select a time in 1-hour increments. When you’ve chosen your time, the display will flash 3 times, and the timer will start automatically.
   Note:
   · The timer indicator will count down from your selected time, and the air purifier will turn off when it’s finished.
   · Press and hold for 2 seconds to cycle through timer options faster.
   · The timer indicator cannot be used to select a time.
   · The indicator will light up when active.

2. When the timer is finished, the air purifier will turn off.

3. To cancel a timer, tap until the display reads “–H” and flashes 3 times.
   Note:
   · You can change the fan speed at any time while the timer is on.
   · The timer will restart if the time is changed.
   · The air purifier will remember the last timer setting while turned off, but the timer will be cancelled and need to be restarted.
   · You can set a timer for 1­24 hours in the VeSync app.

Display Off
This turns off the display lights on the air purifier, including button lights and indicator lights (except the Check Filter Indicator).

1. Press to turn off the display.
2. Tap any button (except or ) to temporarily turn the display back on. If you don’t press another button, the display will turn back off after 3 seconds.
3. Press to turn the display back on. The display will stay on.

Note: The Check Filter Indicator will still turn on and stay on if it’s time to check your filter (see page 14).

Display Lock
When the air purifier is on, you can lock the display to prevent settings from being accidentally changed. Buttons will not respond to being tapped.

1. Tap and hold for 3 seconds to lock/unlock the display.
2. will light up, and will flash 3 times.

Note:

• When the display is locked, will flash 3 times if you tap other buttons on the display.
• Display lock can still be used when the air purifier is in Standby Mode.

VeSync App Functions
The VeSync app allows you to access additional smart air purifier functions, including those listed below. As the app develops, more features may become available.

Remote Control

• Change any air purifier settings through the app, even while Display Lock is on.

Air Quality Updates

• View real-time PM2.5 updates in the app.
• See your air quality history for the previous week.

Auto Mode

• Access additional Auto Modes: Quiet Auto Mode and Efficient Auto Mode.
• Quiet Auto Mode never uses the highest fan speed to avoid making too much noise.
• Efficient Auto Mode lets you choose the size of the area you want to purify. The air purifier will use the highest fan speed to clean the air in that area. Once your air is clean, it will lower to the fan speed best suited to the selected room size.

Schedules

• Create and customise schedules for your air purifier to match your routines.

Timer Function

• Set a timer between 1­24 hours.

Filter Replacement Info

• Keep tabs on the remaining filter life by checking the filter life percentage in the app.
• Shop for replacement filters.

ABOUT THE FILTER

The air purifier uses a 3-stage filtration system to purify air.

A. Pre-Filter

• Captures large particles such as dust, lint, fibres, hair, and pet fur.
• Maximises the filter’s life by protecting it.

B. H13 True HEPA Filter

• Captures at least 99.97% of airborne particles 0.3 microns (µm) in size.
• Traps small particles such as mould spores, fine dust, smoke particles, bacteria and viruses*, and allergens such as pollen, dust mites, and pet dander.

C. High-Efficiency Activated Carbon Filter

• Physically adsorbs smoke, odours, and fumes.
• Filters compounds such as formaldehyde, benzene, ammonia, hydrogen sulphide, and volatile organic compounds (VOCs).

*The H13 True HEPA Filter can remove most viruses and bacteria from the air, but cannot fully remove them from your environment. Air purifiers cannot prevent an infected person from spreading an infection, and cannot remove bacteria and viruses from surfaces. Please use this air purifier together with other precautions.

Clean Air Delivery Rate
This air purifier has a Clean Air Delivery Rate of 195 m³/h or 115 cubic feet per minute (CFM).
Clean Air Delivery Rate (CADR) measures the efficiency of an air purifier by indicating the volume of clean air that an air purifier produces per minute. This is based on removal of dust, pollen, and smoke, which are the 3 most common indoor air pollutants. The higher the CADR, the more particles the air purifier will remove and the larger the area it can clean. The rating is measured at the air purifier’s highest speed.

Air Change per Hour
The air change rate is how many times all of the air in a room can be purified (or “changed”) by the air purifier in 1 hour. Air changes per hour (ACH) are calculated on the recommended room size assuming 2.4 m / 8 ft ceilings. For smaller rooms, the air change per hour will increase. This air purifier has an air change per hour of 2, which means it can change air 2 times per hour at the max speed in a single, closed room up to 41 m². The air purifier is effective for larger rooms, but air purification will take longer, with fewer air changes per hour.
Note: To effectively clean air, keep windows and doors closed while the air purifier is on.

Humidity
Moisture may damage the filter. This air purifier should be used in an area with a humidity level below 85% RH. If you use the air purifier in excessively humid areas, the surface of the filter may become mouldy.

Note: Water or moisture will allow mould to grow. To solve a mould problem, get rid of the source of the moisture and clean up the mold. Air purifiers cannot solve an existing mould problem, and can only remove mould spores and reduce odours.

LEVOIT REPLACEMENT FILTERS

Your air purifier comes with a Levoit True HEPA 3-Stage Original Filter. You can also choose a replacement filter with additional capabilities. Choose the filter best suited to the environment of your home.

CARE & MAINTENANCE

Cleaning the Smart Air Purifier

• Unplug before cleaning.
• Wipe the outside of the air purifier with a soft, dry cloth. If necessary, wipe the housing with a damp cloth, then immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or flammable cleaning agents.

Check Filter Indicator
will light up as a reminder to check the filter. You will also receive a notification from VeSync when it’s time to check your filter, and you can view your filter life percentage in the app at any time. Depending on how often you use the air purifier, the indicator should turn on within 6­8 months. You may not need to replace your filter yet, but you should check it when  turns on.

Cleaning the Filter
The outer pre-filter should be cleaned every 2­4 weeks to increase efficiency and extend the life of your filter. Clean the pre-filter using a soft brush or vacuum hose to remove hair, dust, and large particles. [Figure 3.1] Do not clean the filter with water or other liquids.

Resetting the Check Filter Indicator

Reset the Check Filter Indicator when:

A. lights up red.

1. Replace the filter (see page 15).
2. Turn on the air purifier.
3. Press and hold for 3 seconds.
4. will turn off when successfully reset.

B. The filter was changed before lit up.

1. Press and hold for 3 seconds.
2. The will flash for 3 seconds.
3. will turn off when successfully reset.

When Should I Replace the Filter?
The filter should be replaced every 6­8 months. You may need to replace your filter earlier or later depending on how often you use your air purifier. Using your air purifier in an environment with relatively high pollution may mean you will need to replace the filter more often, even if is off.
You may need to replace your filter if you notice:

• Increased noise when the air purifier is on
• Decreased airflow
• Unusual odours
• A visibly clogged filter

Note:

• To maintain the performance of your air purifier, only use official Levoit filters. To buy replacement filters, go to Amazon and search B07S8NM4Q9. To find ASINs for upgraded replacement filters, see page 13.
• Remember to reset after changing the filter (see page 14).

Replacing the Filter

1. Unplug the air purifier. Flip the air purifier over and remove the filter cover (see Getting Started, page 7).
2. Remove the old filter.
3. Clean out any remaining dust or hair inside the air purifier using a vacuum hose. Do not use water or liquids to clean the air purifier. [Figure 3.2]
4. Unwrap the new filter and place it into the housing (see Getting Started, page 7).
5. Replace the cover. Plug in the air purifier. 6. Reset the Check Filter Indicator (see page 14).

Storage
If not using the air purifier for an extended period of time, wrap both the air purifier and the filter in plastic packaging and store in a dry place to avoid moisture damage.

Cleaning the AirSight Plus Laser Dust Sensor
The AirSight Plus Laser Dust Sensor can be blocked by dust, which affects the sensor’s accuracy. Clean the sensor every 3 months. Using your air purifier in an environment with more dust may mean you will need to clean the sensor more often.

1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over the sensor openings. [Figure 3.3]
3. Turn the vacuum on for at least 10 seconds to clean out dust.

TROUBLESHOOTING

VESYNC APP TROUBLESHOOTING
My air purifier isn’t connecting to the VeSync app.

• During the setup process, you must be on a secure 2.4GHz Wi-Fi network. Confirm that the network is working correctly.
• Make sure the Wi-Fi password you entered is correct.
  • There should be no spaces at the beginning or end of the password.
  • Test the password by connecting a different electronic device to the router.
  • If you’re manually typing in the SSID and password, double check that both are entered correctly.
• Try moving your air purifier closer to the router. Your phone should be as close as possible to your air purifier.
• Your router may need to be at a higher location, away from obstructions.
• Make sure your air purifier and router are away from appliances (such as microwave ovens, refrigerators, electronic devices, etc.) to avoid signal interference.
• If you’re using a VPN, make sure it’s turned off while setting up your air purifier.
• Disable portal authentication for your Wi-Fi network. If portal authentication is enabled, the air purifier will not be able to access your Wi-Fi network, and setup will fail.

Note: Portal authentication means that you need to sign in to your Wi-Fi® network through a web page before you can use the Internet.

My air purifier is offline.

• Make sure the air purifier is plugged in and has power, then refresh the VeSync menu by swiping down on the screen.
• Make sure your router is connected to the internet and your phone’s network connection is working.
• Delete the offline air purifier from the VeSync app. Swipe left (iOS®) or tap and hold (Android™), then tap Delete. Reconfigure the air purifier with the VeSync app.

Note: Power outages, internet outages, or changing Wi-Fi® routers may cause the air purifier to go offline.
If your problem is not listed, please contact Customer Support (see 20).

ATTRIBUTIONS
Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Google, Android, and Google Play are trademarks of Google LLC. App Store® is a trademark of Apple Inc. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. iOS is a registered trademark of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Arovast Corporation is under license.

ABOUT ENERGY-RELATED PRODUCTS
The product, in accordance with the Eco-design Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) NO. 1275/2008, as amended by Regulation (EU) No. 801/2013.

WARRANTY INFORMATION

Terms & Policy
Arovast Corporation warrants all products to be of the highest quality in material, craftsmanship, and service for 2 years, effective from the date of purchase to the end of the warranty period. Warranty lengths may vary between product categories.

If you have any questions or concerns about your new product, please contact our helpful Customer Support Team.

CUSTOMER SUPPORT

Distributed by Arovast Corporation 1202 N. Miller St., Suite A Anaheim, CA 92806 USA

Email: support.eu@levoit.com
*Please have your order invoice and order ID ready before contacting Customer Support.

Instagram
Facebook
Website

References

• Amazon.com
• Levoit - Air Purifiers, Humidifiers, Tower Fans, Vacuums & More

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>