nVent 16P CADDY Push In Conduit Clamp User Guide
- June 1, 2024
- nVent
Table of Contents
nVent 16P CADDY Push In Conduit Clamp User Guide
FEATURES
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- May be used for either vertical or horizontal installations
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Outer Diameter: 30 – 35 mm
- Hole Size: 7 mm
- Hole Type: Plain
- Ultimate Static Load 1: 110 N
- Ultimate Static Load 2: 65 N
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
2024 nVent. All nVent marks and logos are owned or licensed by nVent Services
GmbH or its affiliates. All other trademarks are the property of
their respective owners. nVent reserves the right to change specifications
without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>