LEVOIT Elora Salt Lamp User Manual
- October 28, 2023
- Levoit
Table of Contents
LEVOIT Elora Salt Lamp
Introduction
Here is the ideal Valentine’s Day gift from LEVOIT for your special someone, in a tastefully packaged box! Definitely going to lift your spirits and make your room feel more romantic! You can quickly control the brightness by tapping and holding on the top-notch and exquisitely built touch dimmer switch to create the ideal ambiance and uplift your mood. Because the 6. 6 ft. cord is ETL certified, you are no longer exposed to a fire risk. It has innovative base design, FDA 18/8 class-leading stainless steel, which controls drainage and shields your furniture from moisture accumulation. You will always receive a highly regarded, high-quality product with ETL, FCC, CE, and RoHS approval. Never use water or detergent to wash. Never submerge in liquid of any kind.
One lovely salt lamp; two additional original 15-watt bulbs are provided in the box (new bulbs may be purchased separately if needed by searching for “LEVOIT light bulbs”). Note: Due to the inherent differences in the weight of Himalayan Crystal salt, size, color, and shape may differ from one lamp to the next.
SAFETY USE & CARE
- Keep out of reach of children.
- The lamp is for indoor use only. Avoid exposure to high-temperature sources, direct sunlight and moisture.
- DO NOT strike or drop the lamp.
- To avoid damage, move and handle with care.
- DO NOT wash with water or detergents. Do not immerse in any form of liquid.
- Due to the nature of salt, each crystal varies in color, shape, size, and weight.
- To protect the surface in which the lamp is placed, place a cloth or coaster under the lamp’s base.
- If the salt crystal surface becomes moist, set the lamp to high and leave the lamp on to allow the salt crystal to dry.
- DO NOT replace the bulb while the salt crystal is damp.
MAIN FUNCTIONS
FUNCTION DIAGRAM
- Salt crystal
- Lamp base
- Base screws
- Lighting control
- Base pegs
- Bulb
- Screw slots
- Power cord
NOTE: Each salt crystal is unique in shape and size.
OPERATION
- Place the salt lamp on a hard, flat surface.
- Plug the power cord into a powered socket.
- Tap the lighting control button to turn on the lamp.
- Press and hold the lighting control button to adjust the lamp brightness. Release at the desired brightness setting.
- Press the power button once again to turn off the lamp.
NOTE: The lamp will remember the last mode and brightness level when turned on and off; however, this memory function will not work if the power source is interrupted.
| Action | Command |
|---|---|
| Turn on | Press once. The default level is its brightest setting. |
| Dim Light | Press and hold, then release at desired level (while light is on). |
| Brighten Light | Press and hold, then release at desired level (while light is |
dim).
Turn off| Press once.
LIGHTBULB REPLACEMENT
NOTE: It is best to complete this process seated at a table or nearby surface to place the small screws.
-
Unplug the salt lamp’s power cord.
-
Carefully flip over the lamp, supporting the lamp by the crystal.
-
With a small screwdriver, remove the four base screws, rotating counter-clockwise.
NOTE: DO NOT remove the center screw. -
Gently slide off the base while holding the lamp (upside-down or sideways).
-
Carefully set aside the salt crystal on a flat and stable surface and remove the bulb from the base socket, gently rotating it counter-clockwise.
-
Install a new C7 15W bulb, gently rotating it clockwise.
-
Gently slide the base back onto the crystal, making sure the screw slots and base pegs are aligned.
NOTE: You may test to see if the screw slots and base pegs are aligned by attempting to twist the base while in place. If the base doesn’t rotate, the crystal and base are properly locked in. -
With a small screwdriver, reinstall the screws in each of the four outer slots, making sure they are tightly screwed in.
-
Place the lamp on a flat surface right side up, holding your hand under the base until placed under the table so as to avoid the possibility of losing any loose screws.
CLEANING & MAINTENANCE
- Regularly dust off the salt crystal with a dry clean cloth.
- DO NOT wash or clean with water or liquid detergents.
- If not in use for a long period of time, store the lamp in a cool and dry environment, covering the crystal with a plastic bag.
- The lamp may naturally moisten in humid environments. If used in a humid environment, keep the lamp lit for several hours for it to naturally dry out.
- If the salt crystal becomes moist, gently pat down the crystal surface with a dry-cleaning cloth.
SPECIFICATIONS
- INPUT: 120V ~ 60Hz
- LIGHT COLOR: Orange
- POWER: Max 15W
- LENGTH OF POWER CORD: 56 ft
Due to the nature of salt, each crystal varies in color, shape, size, and weight.
NOTE: Recommended for a room size of equal to or larger than 32 square feet (3 square meters).
PACKAGE CONTENTS
- 1 x Elora Himalayan Salt Lamp
- 3 x C7 15W Bulb (pre-installed)
- 1 x User Manual
FAQs
I have a saucer under mine in case it sweats, but I’m curious to see if anyone has experienced the sweating yet from their Levoit salt lamp?
Where is this made?
kindly note all Levoit salt rock are mined from Pakistan,100% natural and genuine.
Is there a trick to the switch? I have a difficult time easily getting the light intensity adjusted.
It’s a little tricky at first. You tap to turn on/off. Tap and hold to adjust light intensity.
how long does it last?
I don’t know how long it lasts I haven’t seen it shrink at all! But let me say this it comes package beautifully and you will not regret buying! After running it about two weeks straight (the room it is in is HUGE) I’ve been sleeping like a rock!
Screw broke off. Can’t get the base off to replace the bulb. What is the solution now?
I do not know the answer as the lamp was a gift for a granddaughter who is taking it to college. It has not even been taken out of the box.
Screws are hard to take off, how do you get screws off to change the lighbulb?
Needle nose pliers.
if left in the direct sunlight will the pink color fade?
I’m not sure. I do know that wet, humid conditions are not good, but not sure about direct sunlight. Most things fade if let in sunlight for long periods of time, so I wouldn’t recommend it. I would be more concerned about a fire hazard if the sun heated up the outside of the lamp.
How do you change the light bulb?
- Unplug your salt lamp
- Remove screws on its base by rotating counter-clockwise.
- Remove the old bulb from socket, rotating it clockwise.
- Install a new bulb and slide the base back。
You can refer to your user manual for more detailed insurrections.
Is the salt from this lamp from Pakistan?
Yes, the salt is from Pakistan.
How many hours does the 15w bulb last in the Elora Salt Lamp?
Mine has only been turned off for about 72 hours total over the past 5 months. Before that it was on for an average of 7 hours a day for 13 months, original bulb. I hope they all last as long!
When the bulbs burn out, where can I get spare bulbs?
Please kindly note that your package comes with two extra bulbs. If the other two bulbs also burn out, you can purchase the same bulbs on Amazon, which can be found by searching ASIN B06XJ1H913.
country of origin?
All our salt lamps are made of salt rocks from Pakistan and then assembled together in China.
Is it okay to use a “dimmable” led light bulb in this? Does using a led bulb defeat any purpose of this lamp?
I’m not sure about using another bulb. It came with its own bulb and an extra one. The switch has a dimming option. I’m still using the same one it came with and have had it on since the beginning of September.
Mine has some red spots on it. Is there any way to remove them?
They are nature made and subject to natural variations, if they really bother you , return it.
is it made in USA?
No. The plate on the bottom says Made in China. The crystal itself is from the Himalayan Mountains.