Pyle PPHP266B.5 Bluetooth Speaker & Microphone System Instruction Guide
- October 27, 2023
- Pyle
Table of Contents
Pyle PPHP266B.5 Bluetooth Speaker & Microphone System
Introduction
Dual 6. 5″ subwoofers with 500 watt peak power and 250 watt RMS at 3 ohm are included in this high-powered wireless karaoke PA portable Bluetooth speaker to provide remarkable bass response. The loud box-style Bluetooth speaker system is Bluetooth-enabled for wireless audio streaming and is compatible with gadgets including iPhones, Android phones, iPads, tablets, and PCs. Ideal for usage inside and outside of a residential house. Bluetooth karaoke speaker Pyle A USB flash drive port allows the Pyle PA speaker to double as an MP3 player. It also has 3. 5mm AUX, 14″ guitar, and 14″ microphone inputs. has a wired microphone for use with karaoke at home.
The multi-color flashing LED lights on the party speaker with microphone boombox lend life to any event and are ideal for parties and other nighttime gatherings where a vibrant presence is evident. has an LCD digital FM radio as well. The bluetooth party speakers with lights can easily be activated with one button and can record vocals using a microphone, FM, and Bluetooth audio. Additionally has an integrated rechargeable battery, a practical handle, and an audio control center on the top panel.
- DO NOT place objects on top of the device, as objects may scratch the device.
- DO NOT expose the device to dirty or dusty environments.
- DO NOT insert any foreign objects into the device.
- DO NOT expose the device to strong magnetic or electrical field.
- DO NOT use the device in the rain
- Please check with your Local Authority or retailer for proper disposal of electronic products.
- DO NOT disassemble the device. Only a certified service technician should perform repair.
- The device has apertures to disperse heat. DO NOT block the device ventilation, the device may become hot and malfunction as a result.
Illegal operation may cause personal injury, which could be fatal and may cause damage to property.
CONTROL BOARD FUNCTIONS
- DC 9V/1.5A input
- Charge LED indicator
- Power button
- LED button
- USB and MICRO SD jack could support Mp3
- 5MM audio input jack
- 5MM microphone input jack
- 5MM guitar input jack
- Music volume knob
- Play/Pause on USB/MICRO SD mode, scan channel on FM mode
- Last music on USB/MICRO SD mode, last channel on FM mode
- Short press for choosing different input signal, press and hold for voice cancelling function on USB/MICRO SD/BT MODE
- Record function on USB/MICRO SD mode
- Next music on USB/MICRO SD mode, next channel on FM mode
- Short press for repeat song function, long press for microphone priority ON/OFF
- Microphone volume control knob
- Music treble control knob
- Music bass control knob
- Microphone echo control knob
- Guitar volume control knob
REMOTE CONTROL FUNCTIONS
- Standby button
- Choose input AUX/FM/BT/USB signal
- Mute button
- Play/Stop button on MP3 mode, scan function on FM mode.
- Next song on USB/Micro SD card, next channel on FM mode.
- Previous song on USB/Micro SD card, last channel on FM mode
- EQ effect on MP3 mode
- Increase speaker volume
- Choose song number directly on MP3 mode
- Stop button
- Decrease music volume
- Repeat song on USB/Micro SD memory card
TROUBLESHOOTING
| Fault | Possible Cause | Solution |
|---|---|---|
| No sound | 1. No input sound source. |
2. Volume is too low.
| 1. Use a better music signal.
2. Adjust volume.
Distortion of sound| 1. Volume too high.
2. Speaker may be damaged
| 1. Turn down the volume.
2. If speaker is damaged, repair or replace it.
__
Karaoke does not work
| 1. Microphone plug is not fully inserted.
2. Microphone switch is not on.
3. Microphone volume knob is at the lowest position.
| 1. Plug microphone properly into the socket.
2. Turn on microphone switch.
3. Adjust microphone volume properly.
MP3
does not play
| 1. The audio format in the U disc is incorrect.
2. Improper operation has caused a process disorder.
3. USB disc is disconnected.
| 1. Convert audio format into Mp3 format.
2. Reboot the machine.
3. Insert USB disc properly.
WIRELESS BT SPEAKER & MICROPHONE SYSTEM
Portable Stereo Karaoke Speaker with Wired Mic, Built-in LED Party Lights, MP3/USB/Micro SD Readers, FM Radio
| MODEL | PPHP266B |
|---|---|
| Power Output | 500 Watt MAX |
__
Sound System
| __
6.5’’ -in. Subwoofer Speakers (x2)
Total Speaker Size (L x W x H)| 9.5’’ x 9.1’’ x 18.5’’
-inches
FEATURES
- High-Powered PA Speaker System
- Portable Stereo Boombox Speaker Style
- Wireless BT Music Streaming Ability
- Includes Wired Microphone for Home Karaoke Fun
- Multi-Color Flashing LED Party Lights
- Built-in Rechargeable Battery
- Dual Subwoofer Speaker Tower Design
- Full Range Stereo Sound Reproduction
- Ported Subwoofer Enclosure for Extended Bass
- FM Radio with Digital LCD Display
- Top Panel Audio Control Center
- Unique Audio Recording Mode
- Connect & Stream Audio from External Devices
- MP3 Digital Audio File Playback
- Aux (3.5mm) Input Jack
- USB Flash Memory Reader
- Micro SD Memory Card Reader
- (2) 1/4’’ -inch (6.5mm) Microphone/ Guitar Instrument Inputs
- Master Volume, Mic Volume, Treble, Bass Adjustable
- Battery Level Indicator Light
- Convenient Integrated Carry Handle
- Rugged & Durable Molded Cabinet Design
- Used for Public Gatherings, Crowd Control, Home Karaoke
- For Indoor / Outdoor Use
WIRELESS BT STREAMING:
- Built-in BT for Wireless Music Streaming
- Simple & Hassle-Free Pairing
- Works with All of Today’s Latest Devices
- Smartphones, Tablets, Laptops, Computers, etc.
- Wireless BT Version: 5.0
- Wireless BT Network Name: ‘PYLEUSA’
- Wireless Range: Up to 32’ ft.
AUDIO RECORDING MODE
- It’s Easy: One Button Record Activation
- Record Audio as Streamed through the Speaker System
- Ability to Record Vocals via Microphone
- Recording Files save via USB Flash & Micro SD Ports
- Can Also Record FM & Wireless BT Streaming Audio
- Audio File Type Created: MP3
WHAT’S IN THE BOX
- PA Speaker System
- Wired Microphone
- Remote Control
- Power Adapter
TECHNICAL SPECS
- Speaker Style: Molded PA Speaker Cabinet
- Wired Mic Cable Length: 9.8’ ft.
- Impedance: 3 Ohm
- Frequency Response: 55-20kHz
- S/N Ratio: 60dB +/-3dB
- SPL: 94dB (1W/M)
- H.D.: <1%
- USB Interface Type: 2.0
- Digital Audio File Support: MP3
- Maximum USB/Micro SD Flash Support: Up to 32GB
- Mic Nominal Current Drain: <100mAh
- LED Light Power Control Switch: ON / OFF
- Construction Material: Engineered Polypropylene (PP)
- Battery Life: Up to 2 Hours (Charge Time Approx. 4Hours)
- PA Speaker Rechargeable Battery: 7.4V Li-ion, 1800mAh – 13.3Wh, 120g
- Battery Operated Remote: (1) x CR-2025 Button Cell, Included
- Power Cable Length: 3.6’ f.t
- Power Supply: 120/240V (9V Power Adapter)
FAQs
Anybody knows if it comes with a warranty?****
we have a limited 1-year warranty for all our products. For other concerns and inquiries kindly call our Customer Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.
How to make the buzzing stop whenever I am talking using the mic?****
Kindly send us a message at [email protected] so we can help you out.
If I bought two of these could I pair them together (TWS)?****
our sincere apologies but you cannot connect both speakers together. They are both stand-alone devices. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PPHP266B.
If I bought 2 would they pair together?****
unfortunately, we cannot use connect it to other speakers. For more info, kindly visit our website pyleaudio.com. Type the model number on the search box PPHP266B.
How are the lights on a Pyle Speaker turned off?****
to activate (light on) or deactivate (light off) the lighting feature. To turn the lighting function on or off, press and hold the BATT (battery) button and LIGHT button inside the speaker’s cap for around 3 seconds.
How is a Pyle Bluetooth speaker recharged?****
The device may be charged using any micro USB connection and a USB port on a computer or laptop.
Why won’t my Pyle speaker pair with Bluetooth?****
The speaker may need to be unpaired, then repaired with your device. Before starting the connecting process, make sure the Bluetooth Speaker is ON.
Why won’t my Bluetooth speaker pair?****
Go to Settings > System > Advanced> Reset Options > Reset Wi-fi, mobile, & Bluetooth on Android devices. For iOS and iPad devices, you’ll need to unpair every device first, then restart your phone or tablet by going to Settings > Bluetooth, selecting the info icon, then selecting Forget This Device for each device.
How can I link my phone to my wireless microphone?****
(iOS) using a phone Go to Bluetooth in the settings. Your device should be listed under “OTHER DEVICES” at the bottom. Connect after choosing the device. (Android) Swipe the screen down; tap and hold Bluetooth; select the keyboard from the list of devices; and pair.
My Pyle speaker is blaring; why?****
This occurs as a result of a low battery warning, a device connection, or when charging is finished. Depending on the state of your Bluetooth speaker, the frequency, tone, and intensity of the beeping sounds will change.
How is the radio operated on the Pyle speaker?****
Turn the power switch to the “ON” position, then press the “MODE” button to enter FM radio mode. 3. While in playing mode, quickly hit the “Play/pause” button to automatically search for and store the FM Channel.
What about Pyle Bluetooth speakers?****
In fact, the majority of Pyle speaker owners report that their products survive far longer than anticipated. Sound Quality: Its drivers deliver undistorted, crystal-clear audio. It is appropriate for use with portable devices like cellphones, tablets, and laptops because the bass response is very excellent.
How can I tell when the battery in my Bluetooth speaker is full?****
When your battery is low (for instance, two out of four lights), medium (three out of four lights), or full, the battery status indicator on top of your product will let you know (all 4 lights). By depressing the volume control knob close to the top of the speaker, you may also verify this while the recording is being played back.
Without a charger, how can I charge my speaker?****
Simply use your smartphone to charge the wireless speaker. All you have to do is attach your smartphone to it using the USB cord. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.
When charging, can I use my Bluetooth speaker?****
It is completely safe to use your Bluetooth speaker while it is charging if your speaker has a built-in battery. It is not advised to use your Bluetooth speaker while it is charging if the battery is removable.