SloanLED 24S2 24 VDC Power Supp Installation Guide

June 3, 2024
SloanLED

24S2 24 VDC Power Supply

24S2 24 VDC Power Supp

Installation Guide for PN 701895-24S2 – NEC Class 2 Output

  1. Tools required: Wire strippers, drill, and screwdriver.
  2.  Supplies required: Conduit and electrical enclosure for power supply, #8 pan head screws, UL Listed PLTC cable, UL Listed electrical wire connectors (e.g., wire nuts), silicone. Europe: Electrical enclosure for power supply, M4 pan head screws, PLTC cable, silicone, 3M ™ Scotchlok ™ connectors.
  3. Power Supply: Identify primary wires, secondary wires, and the location of mounting tabs.
  4. Mount Power Supplies: Use the mounting tab in the corner to secure the power supply.
  5.  Connect Primary: CAUTION: Have a licensed electrician connect the primary.
    NOTE: Ensure adequate ventilation. The power supply operating ambient temperature is -40º to 60º C. Power supply must be mounted in an enclosure (i.e., the transformer can/raceway). Power supply spacing to thermoplastic, wood, fiber, or other combustible type enclosure materials shall be 1″ (25 mm). Two or more adjacent power supplies shall not be mounted closer than 1″ (25 mm) end to end or 2″ (51 mm) side to side.
    Ensure power supplies are not overloaded by verifying output current is less than 4 DC Amps.
    It is recommended to use photocells or light sensors to prolong life of the power supply and to keep the unit at maximum operating efficiency.

TROUBLESHOOTING

If the sign is not functioning properly, check the following:

  • Primary voltage is between 100-277 VAC
  • The secondary voltage is 24 VDC
  • Output current is 4 Amps or less
  • Power supply is not overloaded (see power supply capacity chart in product installation guide or SloanLED.com)
  • There are no shorts in the secondary wiring
  • All secondary connections are RED-TO-RED and BLACK-TO-BLACK

SloanLED products carry a limited warranty.
For complete details refer to the warranty policy found at SloanLED.com

Some or all of the products shown are covered by U.S. and foreign patents pending and covered by one of more of the following U.S. patents issued: 6776504, 6969179, 7192157, 6932495, 7241031

Customer service and technical support SloanLED Headquarters
5725 Olivas Park Drive, Ventura, CA, USA
888.747.4LED (888.747.4533)
info@SloanLED.com
SloanLED.com
P/N 402601 Rev C 2021-05-10
SloanLED Europe b.v.
Argonstraat 110, 2718 SN Zoetermeer, NL +31 88 12 44 900
Europe@SloanLED.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals