8BitDo N30 Arcade Stick for Nintendo Switch Instruction Manual

8BitDo N30 Arcade Stick for Nintendo Switch

N30 Arcade Stick

instruction

• press start to turn on the joystick
• press & hold start for 3 seconds to turn off the joystick
• press & hold start for 8 seconds to force turn off the joystick

Switch

1. press & hold Y &start to power on the joystick. LED will blink four time per cycle
2. press & hold the pair button for 2 seconds to enter pairing mode. LED will rapidly blink
3. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LED will be solid when the connection is successful
4. the joystick will auto-reconnect to your Switch with the press of start once it has been paired
   • USB connection: Connect your N30 Arcade Stick to your Switch via USB Cable after step 1. LED stays solid on USB connection
   • When connected to your Switch, select+ down= Switch HOME button

macOS

1. press & hold A & start to turn on the joystick, LED will blink three times per cycle
2.  press & hold pair for 2 seconds to enter pairing mode, LED will rapidly blink
3.  go to your macOS device’s Bluetooth setting, and pair with [Wireless Controller]. LED will stay solid when the connection is successful
4. joystick will auto-reconnect to your macOS device with the press of start once it has been paired
   • USB connection: Connect your N30 Arcade Stick to your macOS device via USB Cable after step 1. LED stays solid on USB connection

Android/Windows

1. press & hold X & start to turn on the joystick, LED will blink twice per cycle
2. press & hold pair for 2 seconds to enter pairing mode, LED will rapidly blink
3. go to your Android/Windows device’s Bluetooth setting, pair with [8Bitdo xx Arcade/8Bitdo xx Arcade(x)]. LED will stay solid when the connection is successful
4. the joystick will auto-reconnect to your Android/Windows device with the press of start once it has been paired
   • USB Connection: Connect your N30 Arcade Stick to your Android/Windows device via USB Cable after step 1. LED stays solid on USB connection
   • Input/Xinput switch only applies on Android/Windows devices

Turbo function

1. hold the button you would like to set turbo functionality to and then press the turbo button to activate the functionality
2. to deactivate turbo function, hold the button with turbo functionality activated and press the turbo button

battery

1. status-

2. low battery mode
   LED indicator – LED in red

3. battery charging
   LED stays solid red

   • built-in 480 mAh Li-on with 18 hours of play time
   • rechargable via USB cable with 1 – 2 hour charging time

power saving

• 1 minute with no Bluetooth connection, will power off
• 15 minutes with Bluetooth connection but no use, will power off
• joystick stays on and connected on wired USB connection

support

• please visit support.8bitdo.com for further information & additional support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>