8BitDo SF30 Wireless Controller Instruction Manual
- June 5, 2024
- 8Bitdo
Table of Contents
8BitDo SF30 Wireless Controller
SN30 and SF30
Instruction
- Please turn off the controller before swapping controller modes.
- Press and hold START for 3 seconds to turn off the controller.
Bluetooth Connection
Controllers will auto-reconnect to your devices once they have been paired.
- Android (D-lnput)
- Press and hold START for 1 second to power on the controller, LED will blink once per cycle.
- Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
- Go to your Android device’s Bluetooth setting, pair with [8Bitdo xx GamePad].
- LED will be solid blue when connection is successful.
- USB Connection: connect your 8Bitdo controller to your Android device via USB Cable after step 1.
Windows (X-input)
- Press and hold START+ X for 1 second to power on the controller, LED will blink twice per cycle.
- Press and hold SELECT/or 3 seconds to enter pairing mode. Blue LED will rapidly blink.
- Go to your Windows device’s Bluetooth setting, pair with [8Bitdo xx GamePad{x)].
- LED will be solid blue when connection is successful.
USB Connection : connect your 8Bitdo controller to your Windows device via USB Cable after step 1.
macOS
- Press and hold START+ A for 1 second to power on the controller, LED will blink three times per cycle.
- Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
- Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller].
- LED will be solid blue when connection is successful.\
USB Connection : connect your 8Bitdo controller to your macOS device via USB Cable after step 1.
Switch (by default)
- Press and hold START+ Y for 1 second to power on the controller, LED will blink four times per cycle.
- Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order.
- Press and hold SELECT for 3 seconds to enter pairing mode. Blue LED will rapidly blink.
- LED will be solid blue when connection is successful.
When connected to your Switch, DOWN+ SELECT= Switch HOME button.
Battery
-
Status
LED Indicator -
Low battery mode
LED blinks in red -
Battery charging
LED blinks in green -
Battery fully charged
LED stops blinking in green -
Built-in 480 mAh Li-on with18 Hours of playtime.
-
Rechargeable via USB cable with 1 – 2 hour charging time.
-
Press START for 8 seconds to force turn off your controller.
Power Saving
- Sleep mode – 1 minute with no Bluetooth connection.
- Sleep mode – 15 minutes with Bluetooth connection but no use.
Press START to wake up your controller.
Support
Please visit http://support.8bitdo.com for further information and additional support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>