8BitDo 318765 TwinCube Bluetooth Portable Speaker Instruction Manual

8BitDo 318765 TwinCube Bluetooth Portable Speaker

PowerOn

Press the POWER button on each speaker.  LED on each speaker will rapidly blink

Sync Speakers

1.  Press and hold11 PLAY button on any of the two speakers for 3 seconds.
2. When you hear party Searching; speakers enter pairing mode.
3.  When you hear party Connected; speakers are successfully paired.
4.  LED on the primary/left speaker will slowly blink twice every cycle. LED on the secondary/right speaker will slowly blink once each cycle.

Connection

1.  Bluetooth: find [8Bitdo TwinCube] in your device’s Bluetooth setting, click to connect.
2.  Audio cable: plug your audio cable in AUX-IN port on the primary speaker to connect.
   •  TwinCube Speakers will auto-reconnect to last paired device.

Play Music

1.  Play:(!) Play/Pause AUX IN mode: Silent / Sound back
2.  +/- :volume

PowerOff
Press and hold  POWER button on each speaker to turn off the system, you will hear a beeping sound.

Additional Information

Single Speaker Mode

1.  Press POWER button on any of the two speakers.
2.  Find [8Bitdo TwinCube] in your device’s Bluetooth setting, click to connect.
3.  LED will stay solid, there will also be a sound indicating that connection is successful.

Answer Phone Call

1.  Music playing will be replaced by ring tone when there is an in-coming call.
2.  Press 11 PLAY button to answer/stop phone call.
3.  Press and hold 11 PLAY button to resume music playing.

Charge the Battery
Plug-in USB cable,  LED stays solid;  LED turns off when battery is fully charged; Charging time  2.5 hours.

Support

Please visit support.Sbitdo.com for further information and additional support.

1. volume-
2.  Play/Pause (Answer Phone Call)
3. Volume+
4.  Battery LED
5.  USB port
6.  Bluetooth LED
7. AUXIN

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>