8BitDo SN30 Mod Kit for SNES/SFC Classic Controller Instructions

8BitDo SN30 Mod Kit for SNES/SFC Classic Controller

InstructionS-SN30 Modkit

• Please handle it with care.
  We are not responsible for any damage caused in use.

• Press STARTtoturn on the controller
  Press and hold START for 3 seconds to turn off the controller Press and hold START for 8 seconds to force turn off the controller

Bluetooth connection

Switch

1.  Press START +Yto turn on the controller, LED will blink4 times per cycle.
2.  Press and hold SELECT for 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order and wait for the controller to sync up. LEO will become solid when connection is successful.
4.  Controller will auto-reconnect to your Switch with the press of START once it has been paired.
   When connected to your Switch, the OOWN+SELECT = Switch HOME button.

Android

1. Press START +B to turn on the controller, LEO will blink once per cycle.
2. Press and hold SELECTfor 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [8Bitdo SN30 Mod kit]. LEO will become solid when connection is successful.
4. Controller will auto-reconnect to your Android device with the press of START once it has been paired.

Windows

1. Press START +X to turn on the controller, LEO will blink twice per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Go to your Windows device’s Bluetooth setting, and pair with [8Bitdo SN30 Modkit]. LEO will become solid when connection is successful.
4.  Controller will auto-reconnect to your Windows device with the press of START once it has been paired

MACOS

1. Press and hold START +A to turn on the controller, LEO will blink3times per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LEO will become solid when connection is successful.
4. Controller will auto-reconnect to your macOS device with the press of START once it has been paired.

Bitte Retro Receivers and USB Adapter

1. Press START +B to turn on the controller, LED will blink once per cycle.
2. Press both PAIR button on the receiver/Adapter and SELECT on the controller to sync them.
3. Both LEDs on the receiver/Adpter and controller will become solid when connection is successful.

Button Mapping
Press and hold HOTKEY for 3 seconds to map OPAO and other buttons, LEO will blink once in red when successful:
SELECT+UP: DPAD OPAD
SELECT+LEFT:OPAD LEFT JOYSTICK SELECT+ RIGHT: OPAO • RIGHT JOYSTICK SELECT+DOWN: Swep A-BandX-Y

Battery
Status-LED Indicator
Low battery mode-Red LED blinks Battery charging – Red LEO stays solid Battery fully charged – LED turns off

• Built-in230mAhli-onwith10hoursofplaytima.
• RechargableviaUSBcablewith30minutecherging time.

Support
Please visit http://support.8bitdo.com/forfurtherinformationandadditionalsupport.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>