8BitDo N30 Mod Kit for NES/NES Classic Controller Instructions

8BitDo N30 Mod Kit for NES/NES Classic

InstructionS

• Please handle it with care.We are not responsible for any damage caused in use.
  

Press STARTtoturn on the controller
Press and hold START for 3 seconds to turn off the controller Press and hold START for 8 seconds to force turn off the controller

Bluetooth connection

switch

1. Press START +LEFT to turn on the controller, LEO will blink 4 times per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Goto your Switch Home Page to click on Controllers, then click on Change Grip/Order and waitfor controllerto sync up. LEO will become solid when connection is successful.
4. Controller will auto reconnect to your Switch with the press of START once it has been paired.

‘When connected to your Switch, OOWN+SELECT = Switch HOME button.

Andriod

1. Press START +8 to turn on the controller, LEO will blink once per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. LED will rapidly blink.
3. Go to your Android device’s Bluetooth setting, pair with [88itdo N30 Modkit). LEO will become solid when connection is successful.
4. Controller will auto reconnectto your Android device with the press of START once it has been paired.

WINDOWS

1. Press START +UP to turn on the controller, LEO will blink twice per cycle.
2. Press and hold SELECT for 3 seconds to enter pairing mode. LED will rapidly blink.
3. Go to your windows device’s Bluetooth setting, pair with [8Bitdo N30 Mod kit]. LEO will become solid when the connection is successful.
4. Controller will auto reconnect to yourWindows device with the press of START once it has been paired

macOS

1. Press and hold START +A to turn on the controller, LEO will blink3times per cycle.
2. Press and hold SELECTfor 3 seconds to enter pairing mode. LEO will rapidly blink.
3. Go to your macOS device’s Bluetooth setting, pair with [Wireless Controller]. LEO will become solid when the connection is successful.
4. Controller will auto-reconnect to your macOS device with the press of START once it has been paired.

8Bitdo Retro Receivers and use Adapter

1. 1. Press START +Btoturn on the controller, LEO will blink once per cycle.
2. 2. Press both the PAIR buttons on the receiver/Adapter and SELECT on the controller to sync them.
3. 3. Both LEDs on the receiver/Adapter and controller will become solid when the connection is successful.

Button Mapping

Press end holds HOTKEY for 3 seconds to map OPAD end other buttons, LED will blink once in red when successful:

1. SELECT+UP:0PAD•DPA0
2. SELECT+ LEFT: DPAD” LEFT JOYSTICK
3. SELECT+RIGHT: DPAD= RIGHT JOYSTICK
4. SELECT+00WN: SwepA•BandX-Y

Works only before connecting anything.

Battery

• Status-LEO Indicator
• Low battery mode – Red LED blinks
• Battery charging -Red LEO stays solid
• Battery fully charged -LEO turns off

built-in230mAhli-onwith10hoursofplsytime. “RechargeblevieUSBcsblewith30minutecherging time.

Support

Please visit http://support.8bitdo.com.tor for further information and additional support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>