8BitDo Dogbone Mod Kit Nintendo Dogbone Controller Instructions

8BitDo Dogbone Mod Kit Nintendo Dogbone Controller Instructions

I nstru cti O ns- Dogbone Mod Kit

• Please handle it with care.
  We are not responsible for any damage caused in use.

Switch

1. Switch II- press left+ start to turn on the controller
2. – press and hold select for 3 seconds to enter pairing mode. LED will rapidly blink
3. – go to your Switch Home Page to click on Controllers, then click on Change Grip/Order. LED becomes solid when connection is successful
4.  – controller will auto reconnect to your Switch with the press of start once it has been paired
   • when connected to your Switch, select+ down = Switch HOME button

Android CD – input)

1. – press b + start to turn on the controller
2.  – press and hold select for 3 seconds to enter pairing mode. LED will rapidly blink
3. – go to your Android device’s Bluetooth setting, pair with [8BitDo Dog bone Mod kit]. LED becomes solid when connection is successful
4.  – controller will auto reconnect to your Android device with the press of start once it has been paired.

Windows (X – input) ••••

1. – press up + start to turn on the controller
2. – press and hold select for 3 seconds to enter pairing mode. LED will rapidly blink
3.  – go to your Windows device’s Bluetooth setting, pair with [8BitDo Dog bone Mod kit]. LED becomes solid when connection is successful
4. – controller will auto reconnect to your Windows device with the press of start once it has been paired.

battery

statuslow                                  LED indicator
battery mode                           LED blinks in red
battery charging                      LED stays solid red

• rechargable via USB cable with 1 hour charging time

support

• please visit support.8bitdo.com for further information & additional support

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>