8BitDo SN30 Pro Bluetooth Gamepad/Controller for Android Instruction Manual
- June 5, 2024
- 8Bitdo
Table of Contents
8BitDo SN30 Pro Bluetooth Gamepad/Controller for Android
[
](https://manuals.plus/wp-
content/uploads/2022/05/8BitDo-SN30-Pro-Bluetooth-Gamepad-Controller-for-
Android.webp)
instruction manual
Bluetooth connectivity
- Press the Xbox button to turn on the controller, white status LED starts to blink
- Press the pair button for 3 seconds to enter its pairing mode, white status LED starts to blink rapidly
- go to your Android device Bluetooth setting, pair with [8BitDo SN30 Pro for Android]
- white status LED stays solid when the connection is successful
- the controller will auto-reconnect to your Android device with the press of the Xbox button once it has been paired
button swap
- press and hold any two of the A/B/X/Y /LB/RB/LSB/RSB buttons you would like to swap
- Press the start button to swap them, profile LED blinks to indicate the success of the action
- press and hold any of the two buttons which have been swapped and press the start button to cancel it
- button mapping goes back to its default mode when the controller is turned off
- please visit https://support.Bbitdo.com/ for further information and assistance
custom software
- button mapping, thumbstick sensitivity adjustment & trigger sensitivity alteration
- press the profile button to activate/deactivate the customization, profile LED turns on to indicate the activation please visit https://support.Bbitdo.com/ on Windows to download the software
Analog Trigger to Digital Trigger
- Press and hold LT+ RT + star button to shift trigger input to digital
- Profile LED® blinks when LT/RT are pressed to indicate they are on digital mode
- Press and hold the LT+ RT+ start button again to shift the trigger input back to analog, Profile LED ceases to blink
battery
- status – LED indicator –
- low battery mode: red LED blinks
- battery charging: green LED blinks
- battery fully charged: green LED stays solid
- built-in 480 mAh Li-ion with 16 hours of playtime
- rechargeable via use cable with 1- 2 hour charging time
- sleep mode – 2 minutes with no Bluetooth connection and 15 minutes with no use
- press the Xbox button to wake up the controller
- controller stays on at all times on use connection
support
please visit support.8bitdo.com for further information & additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>