8BitDo Pro 2 Wired Controller for Xbox Instruction Manual
- June 5, 2024
- 8Bitdo
Table of Contents
8BitDo Pro 2 Wired Controller for Xbox
Overview
3.5mm audio jack
connectivity
- Connect the controller to your Xbox One and Xbox Series X/S via its USB cable. Status LED is on when the controller is successfully connected
Windows10
- Connect the controller to your Windows device via its USB cable. Status LEO is on when the controller is successfully connected
- Required system: Windows 10 or above
button swap
- press end hold any two of A/B/X/Y /LB/RB/LSB/RSB buttons you would like to swap
- press the star button to swap them,profile LEO blinks to indicate the success of the action
- press and hold any of the two buttons which have been swapped and press the star button to cancel it
- button mapping goes back to its default mode when controller is turned off
- please visit support.Sbitdo.com for further information and assistance
volume control
- Press and hold profile + up/down to turn up/down in-game volume
- Press and hold profile + left/right to adjust the balance between voice chat and game volume
8BitDo Ultimate Software
button mapping, thumbstick sensitivity adjustment & trigger sensitivity alteration press profile button to activate/deactivate the customization. LEO turns on to indicate the activation
- e.g. set P1/P2 buttons as L3/R3 and more
- available on Xbox/Windows 10/Android/iOS
- please visit Microsoft Store, App Store, Google Play or support.Sbitdo.com to download the software
support
please visit support.Sbitdo.com for further information & additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>