8BitDo SN30 Pro+ Bluetooth Gamepad/Controller Instruction Manual

SN30 Pro+ Bluetooth gamepad –
– instruction manual

• power off: Press and hold start for 3 seconds
• power on: press start. The controller stays on its previous mode

Switch

• motion controls, NFC scanning, IR camera, HD rumble, and notification LED are not supported, nor can the system be wakened up wirelessly

Bluetooth connection

1.  press Y + start to turn on the controller. The LED starts to rotate from left to right
2. press the pair button for 3 seconds to enter its pairing mode. LED stops blinking for a short moment and then starts to rotate again (this is required for the very first time only)
3. g0 to your Switch Home Page to click on Controllers, then click on Change Grip/Order
4. LED becomes solid when the connection is successful
   • Controller will auto-reconnect to your Switch with the press of start once it has been paired

wired connection

1.  Press Y + start to turn on the controller. The LED starts to rotate from left to right
2. connect the controller to your Switch dock via its USB cable
3. wait till the controller is successfully recognized by your Switch to play
   • Switch system needs to be 3.0.0 or above for a 2.4g connection. Go to System Setting> Controller and Sensors> turn on Pro Controller Wired Communication
   • LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Windows (X – input)

Bluetooth connection
• required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported

1. Press X + start to turn on the controller. LEDs 1&2 starts to blink
2. Press the pair button for 3 seconds to enter its pairing mode. The LED starts to rotate from left to right (this is required for the very first time only)
3. go to your Windows device’s Bluetooth setting> Bluetooth&other devices> turn it on
4.  choose Bluetooth&other devices – Bluetooth
5. Pair with [8B itDo SN30 Pro + l
6. LED becomes solid when the connection is successful
   • controller will auto-reconnect to your Windows device with the press of start once it has been paired

with wired connection

1.  Press X + start to turn on the controller. LEDs 1 & 2 start to blink
2. connect the controller to your Windows device via its USB cable
3. wait till the controller is successfully recognized by your Windows device to play
   • LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the controller supports

Android CD – input)

•  required system: Android 4.0 or above
  Bluetooth connection

1. Press B + start to turn on the controller. LED 1 starts to blink
2. Press the pair button for 3 seconds to enter its pairing mode. The LED starts to rotate from left to right (this is required for the very first time only)
3. g0 to your Android device’s Bluetooth setting, pair with [BBitDo SN30 Pro+ l
4. LED becomes solid when the connection is successful
   • controller will auto-reconnect to your Android device with the press start once it has been paired

wired connection

1. Press B + start to turn on the controller. LED 1 starts to blink
2.  connect the controller to your Android device via its USB cable
3.  wait till the controller is successfully recognized by your Android device to play
   • OTG support is required on your Android device

macOS

• required system: OS X Lion (10.10) or above
Bluetooth connection

1.  press A+ start to turn on the controller, LEDs 1, 2&3 start to blink
2. Press the pair button for 3 seconds to enter its pairing mode. The LED starts to rotate from left to right (this is required for the very first time only)
3. go to your macOS device’s Bluetooth setting and turn it on
4.  pair with [Wireless Controller]
5. LED becomes solid when the connection is successful
   • controller will auto-reconnect to your macOS device with the press of start once it has been paired

wired connection

1. press A+ start to turn on the controller, and LEDs 1, and 2&3 start to blink
2. connect the controller to your macOS device via its USB cable
3. wait till the controller is successfully recognized by your macOS device to play

Turbo function

1. hold the button you would like to set turbo functionality to and then press the start button to activate its turbo functionality
2. home LED blinks continuously when the button with turbo functionality is pressed
3. hold the button with turbo functionality then press star to deactivate its turbo functionality
   • D-pad joysticks, home, select and start buttons are not included
   • This does not apply to Switch mode

battery

• 1000 mAh built-in battery pack with 20 hours of playtime, rechargeable with 4 hour charging time
• replaceable with AA batteries with 20 hours of playtime
• The controller will turn off in 1 minute with no connection and 15 minutes with Bluetooth connection but no use
• The controller stays on with the wired connection

Ultimate Software

• It gives you elite control over every piece of your controller: customize button mapping, adjust stick & trigger sensitivity, vibration control, and create macros with any button combination. Create controller profiles and switch between them at anytime
• please visit support.Bbitdo.com for the application

support

• please visit support.Bbitdo.com for further information & additional support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>