8BitDo N30 Bluetooth Gamepad/Controller Instruction Manual
- June 5, 2024
- 8Bitdo
Table of Contents
N30 Bluetooth gamepad –
-instruction manual
- press start to turn on the controller
- press & hold start for 3 seconds to turn off the controller
- press & hold start for 8 seconds to force turn off the controller
Switch
- Press start to turn on the controller, and LEO will start to blink
- press and hold select for 3 seconds to enter pairing mode. LEO will rapidly blink
- go to your Switch Home Page to click on Controllers, then click on Change Grip/Order to pair with the adapter
- -LED will stay solid when the connection is successful
• controller will auto-reconnect to your Switch with the press of start once it has been paired
Retro Receivers & USB Adapter
- Press start to turn on the controller, and LEO will start to blink
- press and hold select for 3 seconds to enter pairing mode. LEO will rapidly blink
- Press the pair button on the receiver, and LEO will start to blink
- LED on both the controller and receiver will stay solid when the connection is successful
• controller will auto-reconnect with the press of start once it has been paired
battery
| status — | LED indicator - |
|---|---|
| low battery mode | red LEO blinks |
| battery charging | solid red LEO |
- built-in 480 mAh Li-on with 18 hours of playtime
- rechargeable via USB cable with1-2 hour charging time
support
- please visit support.8bitdo.com for further information & additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>