8BitDo 6922621501350 Arcade Stick for Switch and Windows Instruction Manual

Table of Contents

Arcade Stick — instruction manual

motion controls, NFC scanning, IR camera, HD rumble, and notification LED are not supported, nor can the system be wakened up wirelessly

2.4g connection

— put the connection switch to 2.4G
— turn the mode switch to S mode, and LEDs start to blink
— plug the receiver into the USB port on Switch. The Arcade stick will auto-connect to the receiver
— LEDs on both the arcade stick and receiver will become solid when the connection is successful
• press the home button to continue to use the arcade stick when it is already on S mode
• Switch system needs to be 3.0.0 or above for 2.4g connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication

Bluetooth connection

— put the connection switch to BT
— turn the mode switch to S mode, and LEDs start to blink
— press and hold the pair button for 3 seconds to enter its pairing mode, LEDs start to rotate clockwise (this is required for the very first time only)
— go to your Switch Home Page to click on Controllers, then click on Change Grip/Order 5 — LED becomes solid when the connection is successful
• press the home button to continue to use the arcade stick when it is already on S mode
• arcade stick will auto-reconnect to your Switch on S mode once it has been paired

wired connection

— turn the mode switch to S mode, LEDs start to blink
— connect the arcade stick to your Switch dock via its USB-C cable
— wait till the arcade stick is successfully recognized by your Switch to play
• Switch system needs to be 3.0.0 or above for wired connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication
• LED lights indicate the player number,1 LED indicates playerl, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick supports

2.4g connection

— put the connection switch to 2.4G
— turn the mode switch to X mode, LEDs start to blink
— plug the receiver into the USB port on your Windows device. Arcade stick will auto-connect to the receiver
— LEDs on both the arcade stick and receiver will become solid when the connection is successful
• press the home button to continue to use the arcade stick when it is already on X mode

Bluetooth connection
• required system: Windows 10 (1703) or above. Bluetooth 4.0 is supported

— put the connection switch to BT
— turn the mode switch to X mode, and LEDs start to blink
— press and hold the pair button for 3 seconds to enter its pairing mode, LEDs start to rotate clockwise (this is required for the very first time only)
— go to your Windows device’s Bluetooth setting, pair it with 8BitDo Arcade Stick
— LED becomes solid when the connection is successful
• press the home button to continue to use the arcade stick when it is already on X mode
• arcade stick will auto-reconnect to Windows on X mode once it has been paired

wired connection

— turn the mode switch to X mode, LEDs start to blink
— connect the arcade stick to your Windows device via its USB-C cable
— wait till the arcade stick is successfully recognized by your Windows device to play
• LED lights indicate the player number,1 LED indicates playerl, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick supports

— hold the button you would like to set turbo functionality to and then press the start button to activate its turbo functionality
— LED will blink when the button with turbo functionality is pressed
— hold the button with turbo functionality first then press the start button to deactivate its turbo functionality, LED will cease to blink
• joystick, home, select and start buttons are not included

— use the control stick switch to shift the joystick function to either the left joystick(LS), directional pad (DP), or right joystick (RS)
• LS: Left joystick, DP: D-pad, RS: Right joystick

It gives you elite control over every piece of your arcade stick: customize button mapping and create macros with any button combination
e.g. create macros and more with P1, P2
please visit support.8bitdo.com for the application

status — LED Indicator —
low battery mode→ red LED blinks
battery charging → red LED stays solid
battery fully charged→ red LED turns off

built-in 1000mAh Li-on battery with 40 hours of playtime on 2.4g connection and 30 hours on a Bluetooth connection
rechargeable with 4 hour charging time
arcade stick turns off in 1 minute with no connection and 15 minutes with 2.4g wireless / Bluetooth connection but no use
arcade stick stays on with the wired connection

retrieve a lost connection or connect to a new receiver
• to retrieve a lost connection or re-pair to it, please follow the steps below:

— put the connection switch to 2.4G
— turn the mode switch to S / X mode, LEDs start to blink
— plug the receiver into your Switch / Windows device
— press and hold pair button for 3 seconds to enter its pairing mode. LEDs start to rotate clockwise
— LED becomes solid when the connection is successful

• 2.4g receiver can only connect to one arcade stick at a time