kogan CTAICOMWISA Cordless Air Pump Tyre Compressor Inflator User Guide
- June 5, 2024
- Kogan
Table of Contents
kogan CTAICOMWISA Cordless Air Pump Tyre Compressor Inflator
SAFETY AND WARNINGS
For your safety, ensure to read this user guide carefully before using this device. Retain this user guide for future reference.
- This compressor is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the compressor by a person responsible for their safety.
- Keep away from children.
- Keep away from flammable and explosive liquids.
- Do not use in the vicinity of a petrol station.
- Always take care and be observant during use.
- This compressor contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact help.Kogan.com after consulting the Troubleshooting section of this user guide.
- Allow the air compressor to cool after for 15 minutes after every 8 minutes of operation.
COMPONENTS
OVERVIEW
Compressor and inflation tube
- Power button
- Pressure button
- Display
- Micro-USB port
- Charging light
- Car charging port
- Inflation button
- Flashlight
- Latch
Valve adapters
OPERATION
Attach the appropriate connector onto the latch end of the inflation tube.
Powering on
Press and hold the power button to turn on the compressor.
Setting the air pressure
- Press the power button to change the measurement units (psi, kPa, kg/cm², Bar).
- Press the pressure button to reduce the tyre pressure value slowly. Press and hold the pressure button to reduce the tyre pressure value rapidly. The display will show the air pressure value.
- For every press, psi reduces by 1, kPa reduces by 10, and kg/cm² and Bar reduces by 0.1.
Note: Ensure all air pressure values are set correctly as indicated in the user guide for the item which you are inflating.
Inflation
- Screw one end of the inflation tube clockwise into the flashlight end of the compressor.
- Attach the connector end of the inflation tube into the item you are inflating, then push the latch on the inflation tube into the downward position.
- Press the inflation button to begin inflating. The flashlight will illuminate while inflating.
The compressor will automatically stop when the set air pressure value is reached. Once inflated, push the latch up and remove the valve adapter. Disconnect the inflation tube by turning it anti-clockwise.
Note: The compressor can be used continuously for up to 8 minutes. After 8 minutes, allow it to cool for at least 15 minutes before reusing.
Deflation
- Attach the connector end of the inflation tube into the item you are deflating.
- Without the compressor attached, push the latch into the downward position and the item will begin deflating.
Monitoring car tyre pressure
Ensure the inflation tube and appropriate connector is secured onto the
compressor, then connect it to the car tyre. Press the power button and the
display will then show the tyre’s pressure.
Charging
The compressor can be charged by either using the car charger, or the Micro-
USB to USB charging cable. When being charged, the charging light will
illuminate red, then disappear when fully charged.
If using the car charger: Plug one end of the car charger into the car
charging port. With the car running, plug the other end into the car cigarette
lighter.
If using the Micro-USB to USB charging cable: Plug the Micro-USB end of
the cable into the Micro-USB port. Plug the other end into an adapter (not
supplied), then plug the adapter into a wall outlet. Turn the outlet on.
TROUBLESHOOTING
Problem | Solution |
---|---|
The compressor cannot turn on. | · Connect the compressor with the car |
cigarette lighter.
· Ensure the compressor is fully charged.
Unable to inflate items.| Ensure the latch on the inflation tube is in the
upward position and the inflation button is pressed.
Unable to deflate items.|
Ensure the latch on the inflation tube is in the downward position and the appropriate connector has been used.
Unable to monitor car tyre pressure.
The compressor is overheating.| After 8 minutes of continuous use, cool the
compressor for at least 15 minutes.
SPECIFICATIONS
- Car power input: 12V/4A
- USB charging input: 5V/2A
- Battery capacity: 6000mAh (2000mAh x 3)/12.4V
- Working temperature: 0°C–40°C
- Charging time: Approx. 2 hours
- Reachable pressure: 150psi, 10.3Bar, 990kPa, 10.5kg/cm
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>